Condition: BRAND NEW IN ORIGINAL PACKAGING Warranty: 5 YEAR MANUFACTURER

Authorized Crest Dealers! Crest Audio Pro-LITE 3.0 and Pro-LITE 3.0 DSP power amplifiers, featuring an incredibly lightweight, efficient design with high power and stable performance into 2-ohm loads. Crest Audio Pro-LITE Series amps are built on an advanced, high-speed class D design with a switch-mode power supply that reduces weight while increasing reliability, thermal efficiency and output power. The Pro-LITE3.0 and Pro-LITE 3.0 DSP boast 870 watts per channel at 4 ohms stereo (up to 3,150 watts bridged @ 4 ohms), weigh 13.3 lbs., and deliver rock-solid performance in parallel, stereo and bridged modes. The robust power supply allows these amplifiers to deliver consistent, stable performance with low frequencies and at 2-ohm operation. The Crest Audio Pro-LITE 3.0 DSP features an onboard digital signal processor that hosts a suite of delays (0-120ms per channel), adjustable crossovers, adjustable limiters, parametric EQ, HF driver EQ, four user preset storage locations, and stereo/mono operation with lockable security settings. The front-panel LCD screen allows users to quickly identify and assign presets, while the USB port allows users to load presets and enables external setup and adjustment. The Pro-LITE DSP section also integrates Waves MaxxBass Bass Extension technology, which uses psycho-acoustics to create precise harmonics that give the perceived effect of boosting low frequencies in the mix. The level of MaxxBass effect can be adjusted from 0% to 100%. Crest Audio Pro-LITE Series amplifiers feature two channels with channel-independent, fourth order 100 Hz crossovers housed in a steel chassis. The proprietary ACL Automatic Clip Limiting circuitry prevents the amplifier from sending potentially damaging clipped signals to the loudspeakers. Additional onboard protection circuitry includes DC, Temp, Signal and Active safeguards, all referenced on the front panel with LED indicators. Features: Crest ProLITE 3.0 Professional Power Amplifier Rated Power Bridge 4 ohms - 3,060 Watts @ 1 kHz 1% T.H.D. Rated Power Bridge 8 ohms - 1,560 Watts @ 1 kHz 0.1% T.H.D. Rated Power (2 ohms) - 1,530 Watts x 2 Channels @ 1 kHz 1% T.H.D. both channels driven. Rated Power (4 ohms) - 840 Watts x 2 Channels @ 1 kHz at <0.1% T.H.D. both channels driven. Rated Power (8 ohms) - 430 Watts x 2 Channels @ 1 kHz at <0.1% T.H.D. both channels driven. Rated Power (2 ohms) - 1,630 Watts x 1 Channel @ 1 kHz at <1% T.H.D. Rated Power (4 ohms) - 930 Watts x 1 Channel @ 1 kHz at <0.1% T.H.D. Rated Power (8 ohms) - 470 Watts x 1 Channel @ 1 kHz at <0.1% T.H.D. Minimum Load Impedance - 2 ohms Maximum RMS Voltage Swing - 71 volts Frequency Response - 20 Hz - 60 kHz; -0.2 dB, -3.0 dB at 1 watt. T.H.D. (2 Channels x 2 ohms) - <0.1% @ 1,400 watts per channel from 20 Hz to 4 kHz, decreasing to 1,200 watts at 20 kHz. T.H.D. (2 Channels x 4 ohms) - <0.1% @ 850 watts per channel from 20 Hz to 20 kHz. T.H.D. (2 Channels x 8 ohms) - <0.1% @ 435 watts per channel from 20 Hz to 20 kHz. Input CMRR - > - 76 dB @ 1 kHz Voltage Gain - x 75 (+37dB) Crossover - 100 Hz switchable 2nd order High pass and 3rd order Low Pass per channel. Crosstalk - > -76 dB @ 1 kHz at 100 watts power @ 4 ohms. Hum and Noise - > -103 dB, "A" weighted referenced to rated power @ 4 ohms. Slew Rate - > 12V/µs Damping Factor (8 ohms) - > 255:1 @ 20 Hz - 1 kHz at 8 ohms Phase Response - +20 to -70 degrees from 20Hz to 20kHz Input Sensitivity - 0.775 volts +/- 3% for 1 kHz 4 ohm rated power, 0.750 volts +/- 3% for 1 kHz. 2 ohm rated power Input Impedance - 15k ohms, balanced and 7.5k ohms unbalanced. Current Draw @ 1/8 Power - 785VA @ 2 ohms, 475VA @ 4 ohms, 300VA @ 8 ohms Input Wattage @ 1/8 Power - 495 watts @ 2 ohms, 280 watts @ 4 ohms, 165 watts @ 8 ohms Current Draw @ 1/3 Power - 1,830VA @ 2 ohms, 1,020VA @ 4 ohms, 575VA @ 8 ohms Input Wattage @ 1/3 Power - 1,295 watts @ 2 ohms, 665 watts @ 4 ohms, 345 watts @ 8 ohms Idle Consumption - 75 watts, 160VA Cooling - Temperature dependent variable speed 80 mm DC fan Controls - 2 front panel attenuators, crossover select switch for H.P.F, Normal and L.P.F. and input mode switch for Stereo, Bridge and Parallel Indicator LEDs - 2 DDT (ACL clip limiting), 2 Signal presence, 2 Active status, 2 Temp and 2 DC protect Protection - Thermal, DC, subsonic, incorrect loads, under and over voltage Connectors - Inputs: Dual Combination 1/4” XLR, Outputs: Three Speakon connectors for two channels plus bridge Construction - 18 ga. galvanized steel Dimensions - 3.5”x19”x 10.5” behind front panel + 0.6” for handle Net Weight - 5.533 kg (12.2 lbs.*) Gross Weight - 6.3 kg (13.9 lbs.) Warranty - 5 years Rated power readings made with BW: <10 Hz to 22 kHz All power measurements made at 120 VAC and 240VAC 2 ohm power is time limited by circuit breaker Net Weight does not include power cord

---

Advantages of buying from an authorized seller: Best prices - We sell all Crest Products at great prices Full Factory Warranty Lifetime Customer Service by Crest product experts Guaranteed legitimate and authentic merchandise Please note: If you purchase Crest from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy. Prior to returning merchandise, contact us and we will give you a return authorization #. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 5 YEAR Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us. Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options: You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit. You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us. Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.