Condition: BRAND NEW IN ORIGINAL PACKAGING Warranty: 1 YEAR MANUFACTURER

Package Includes: (1) Audio Technica AT4033/CL Cardiod Condenser Microphone (1) Audio Technica AT4040 Professional Cardioid Condenser Microphone

---

Authorized Audio Technica Dealer! Description of AT4033CL:   The classic edition of the legendary AT4033 microphone, the side-address AT4033/CL offers low-noise, symmetrical, transformerless circuitry that results in exceptional transient response and clean output signals. A studio classic and bluegrass favorite, the AT4033/CL cardioid studio condenser is the microphone that broke the US$1000-barrier in its class. A strong up-front presence characterizes the sonic signature of this 40 Series pro-audio classic. The AT4033/CL’s 80Hz high-pass filter easily switches between flat frequency response and a low-end roll-off that diminishes ambient noise and popping with closely-miked vocals. Features: Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use Floating-construction capsule assembly provides isolation from noise and vibration Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards Custom shock mount provides superior isolation Specifications: Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 30-20,000 Hz Low Frequency Roll-Off: 80 Hz, 12 dB/octave Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa Impedance: 100 ohms Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.;155 dB SPL, with 10 dB pad (nominal) Noise: 17 dB SPL Dynamic Range (typical): 128 dB, 1 kHz at Max SPL Signal-to-Noise ratio: 77 dB, 1 kHz at 1 Pa Phantom Power Requirements: 48V DC, 3.2 mA typical Switches: Flat, roll-off, 10 dB pad (nominal) Weight: 13.4 oz (380 g) Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter Output Connector: Integral 3-pin XLRM-type Cable: 16.5' (5 m) dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors Accessories Furnished: AT8449/SV shock mount for 5/8"-27 threaded stands, microphone dust cover, protective carrying case Audio-Technica case style: R1

---

Description of AT4040:  The AT4040 side-address condenser microphone features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. A marriage of technical precision and artistic inspiration, the AT4040 offers exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility. This ultra-consistent microphone may be used with confidence in a wide variety of studio and live miking applications, even under the stringent demands of digital recording systems. The AT4040’s low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects. The AT4040 is a large-diaphragm side-address externally polarized (DC bias) condenser microphone with a cardioid polar pattern. It is designed to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement. The microphone requires 48V phantom power for operation. The cardioid polar pattern of the microphone is more sensitive to sound originating directly in front of the element, making it useful in controlling feedback, reducing pickup of unwanted sounds and providing isolation between performers. The output of the microphone is a 3-pin XLRM-type connector.The microphone is equipped with a switchable 10 dB pad and a switch that permits choice of flat response or low-frequency roll-off (via integral 80 Hz high-pass filter). The microphone is enclosed in a rugged housing. The included AT8449 shock mount provides superior isolation and permits mounting on any microphone stand with 5/8"-27 threads. A dust cover and a protective carrying case are also included.
Features: Audio Technica AT4040 Large Diaphragm Cardioid Studio/Live Sound Microphone Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics Externally polarized (DC bias) true condenser design Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards Custom shock mount provides superior isolation Switchable 80 Hz hi-pass filter and 10 dB pad Details: ELEMENT: Externally-polarized (DC bias) condenser POLAR PATTERN: Cardioid FREQUENCY RESPONSE: 20-20,000 Hz LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY: -32 dB (25.1 mV) re 1V at 1 Pa IMPEDANCE: 100 ohms MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal) NOISE: 12 dB SPL DYNAMIC RANGE (typical): 133 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 82 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 48V DC, 4.2 mA typical SWITCHES: Flat, roll-off;10 dB pad (nominal) WEIGHT: 12.7 oz (360 g) DIMENSIONS: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter OUTPUT CONNECTOR: Integral 3-pin XLRM-type ACCESSORIES FURNISHED AT8471: AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case AUDIO-TECHNICA CASE STYLE: R1

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy. Prior to returning merchandise, contact us and we will give you a return authorization #. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us. Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options: You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit. You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us. Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.