Neumann TLM 103 at a Glance:Cardioid pattern to limit bleedClassic design for transparent soundNeumann's "TLM" technologyCardioid pattern to limit bleedThe cardioid TLM 103 utilizes a tried-and-true transformerless circuit found in high-end Neumann microphones to achieve its otherwise unattainable low self-noise and the highest sound pressure level transmission possible. By focusing on this pattern - used in most recording situations - the attenuation of unwanted rear sound has been optimized. Off-axis sounds are rendered naturally while isolation is increased. This also leads to a high feedback suppression when the microphone is used in live situations or where loudspeaker playback is a factor. And at this price there's no reason not to have a pair!Classic design for transparent soundThe TLM 103 is addressed from the front, marked with the red Neumann logo on the microphone body. The K 103 large diaphragm capsule is based on the K 87, well known from the U 67 / U 87 microphones.The capsule has a flat frequency response up to about 5kHz, and above that, a wide flat 4dB presence boost. The large wire mesh headgrille protects the capsule from plosive sounds and effectively prevents pop noises. These characteristics are achieved without resorting to corrective resonance effects. Therefore, the TLM 103 maintains an excellent impulse response and reproduces the details of music and speech without coloration. With the incredibly low self-noise level of the TLM 103 even the smallest signals are reproduced basically noise-free. As it is capable of handling sound pressure levels up to 138dB without distortion, the TLM 103 provides a dynamic range of 131dB (A-weighted).Neumann's "TLM" technologyThe letters TLM stand for "transformerless microphone". With TLM technology the usual output transformer is replaced by an electronic circuit. As with traditional transformers, it ensures good common mode rejection, and prevents RF interference that may influence the balanced audio signal.Neumann TLM 103 Features:Nickel finishLarge-diaphragm cardioid condenser microphonePressure gradient transducer with with one-diaphragm capsuleTransformerless circuitryExtremely low noiseIncludes swivel mountMinimal self-noiseFrequency range: 20Hz-20kHzRated impedance: 50 ohmsRated load impedance: 1 kohmsMaximum SPL for THD 0.5%2: 138dBWooden box and stand mount includedRequires +48V phantom power Tech Specs

Microphone Type	Condenser
Polar Pattern	Cardioid
Frequency Response	20Hz-20kHz
Max SPL	138dB
Output Impedance	50 ohms
Signal to Noise Ratio	87dB (A weighted)
Self Noise	7dB (A weighted)
Color	Satin Nickel
Connector	XLR
Weight	1 lb.
Included Accessories	Stand Shock Mount, Wood Box
Manufacturer Part Number	008430