Back to the main page Back to category Neumann TLM103 C
musical instrument details
Neumann TLM 103 Condensor Microphone
Estimated price for orientation: 950 $
Category: Neumann TLM103 C
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Neumann Pickup Pattern: Cardioid MPN: NEUTLM103ANN, 8430, tlm103mt Type: Condenser Microphone Connectivity: Cable Mount Type: None Connector(s): XLR 3 Pin Model: TLM103 Features: Noise-Cancelling Design: Freestanding Microphone Form Factor: Handheld/Stand-Held UPC: 615104084308
Acoustic transducer: Pressure gradient transducer Directional characteristic: Cardioid Frequency response: 20 Hz to 20 kHz Free-field sensitivity1):–39 dBFS Equivalent noise level, CCIR3): 17.5 dB Equivalent noise level, A-weighted3): 7 dB-A Signal-to-noise ratio2), CCIR3): 76.5 dB Signal-to-noise ratio2), A-weighted3): 87 dB Maximum SPL at 0 dBFS: 134 dBSPL Dynamic range, A-weighted3): 127 dB Latency: 44,1/48 kHz: 52 samples 88,2/96 kHz: 61 samples 176,4/192 kHz: 121 samples (AES 3) Preset: - Sampling rate: 48 kHz - Gain: 10 dB (variable with DMI-2) - Compressor on, Attack time 100 ms, Release time 0.5 s, Threshold –10 dBFS, Ratio 2:1 Supply voltage range: +6 V to +10.5 VCurrent consumption: max. 150 mA Weight: approx. 460 g, Diameter: 60 mm, Length: 132 mm General Specifications of the Solution-D microphones Interface: AES42 Remote controlled functions: - Polar pattern4) - Low-cut: flat, 40, 80, 160 Hz - Pre-attenuation: 0 , -6, -12, -18 dB - Gain: 0...63 dB in 1 dB steps, clickless - Testsignal: 1 kHz, pink noise, white noise - Sampling rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz - Parametric compressor/limiter (incl. de-esser function) - Independent peak limiter avoiding any clipping - Switch functions: soft muting, phase reverse, signal lights - Signal lights: red4) and blue LEDs - System functions, firmware download A/D conversion: Neumann process (patented), 28-bit internal word length Digital signal processing: Fixed-point, variable internal word length 28 bits to 60 bits Synchronization: - Asynchronous operation (free-running, AES42 - Mode 1), basic frequency accuracy: ± 25 ppm - Synchronous operation (AES42 - Mode 2), pulling range: Min. ± 100 ppm Power supply (phantom power complying with AES42) Output: XLR3M, 24 bits as per AES/EBU (AES3)
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Neumann |
| Pickup Pattern: | Cardioid | MPN: | NEUTLM103ANN, 8430, tlm103mt |
| Type: | Condenser Microphone | Connectivity: | Cable |
| Mount Type: | None | Connector(s): | XLR 3 Pin |
| Model: | TLM103 | Features: | Noise-Cancelling |
| Design: | Freestanding | Microphone Form Factor: | Handheld/Stand-Held |
| UPC: | 615104084308 |
Acoustic transducer: Pressure gradient transducer Directional characteristic: Cardioid Frequency response: 20 Hz to 20 kHz Free-field sensitivity1):–39 dBFS Equivalent noise level, CCIR3): 17.5 dB Equivalent noise level, A-weighted3): 7 dB-A Signal-to-noise ratio2), CCIR3): 76.5 dB Signal-to-noise ratio2), A-weighted3): 87 dB Maximum SPL at 0 dBFS: 134 dBSPL Dynamic range, A-weighted3): 127 dB Latency: 44,1/48 kHz: 52 samples 88,2/96 kHz: 61 samples 176,4/192 kHz: 121 samples (AES 3) Preset: - Sampling rate: 48 kHz - Gain: 10 dB (variable with DMI-2) - Compressor on, Attack time 100 ms, Release time 0.5 s, Threshold –10 dBFS, Ratio 2:1 Supply voltage range: +6 V to +10.5 VCurrent consumption: max. 150 mA Weight: approx. 460 g, Diameter: 60 mm, Length: 132 mm General Specifications of the Solution-D microphones Interface: AES42 Remote controlled functions: - Polar pattern4) - Low-cut: flat, 40, 80, 160 Hz - Pre-attenuation: 0 , -6, -12, -18 dB - Gain: 0...63 dB in 1 dB steps, clickless - Testsignal: 1 kHz, pink noise, white noise - Sampling rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz - Parametric compressor/limiter (incl. de-esser function) - Independent peak limiter avoiding any clipping - Switch functions: soft muting, phase reverse, signal lights - Signal lights: red4) and blue LEDs - System functions, firmware download A/D conversion: Neumann process (patented), 28-bit internal word length Digital signal processing: Fixed-point, variable internal word length 28 bits to 60 bits Synchronization: - Asynchronous operation (free-running, AES42 - Mode 1), basic frequency accuracy: ± 25 ppm - Synchronous operation (AES42 - Mode 2), pulling range: Min. ± 100 ppm Power supply (phantom power complying with AES42) Output: XLR3M, 24 bits as per AES/EBU (AES3)