Back to the main page Back to category Signal Processors or Rack Effect
musical instrument details
WAVES MAXX BCL (Bass Enhancement, Compressor, L2 Limiter) OUTBOARD PROCESSOR
Estimated price for orientation: 2 100 $
Category: Signal Processors or Rack Effect
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Type: Dynamic Range Processor Form Factor: Rack-Mountable Effect/Enhancement: Compression/Limiting, Harmonic Enhancement Number of Channels: 2 Model: MAXX BCL Brand: Waves
Waves max bcl been used on my home studio for the past 3 years,for voice over production wasn't used too long probably had once or twice per month,it works great and sounds great I've always used through spidif outputs and controlled from pro tools interface which it sounds amazing but it's about time to get the Manley mastering processors Please ask any question before to buy No returns or money back Thanks WAVES MaxxBCL Hardware Processor Unit Input / Output Analog, AES/EBU, SPDIF Independent rear panel input and output headroom calibration in 6 steps (+9, 12, 15, 18, 20 and 24 dBu) Passive analog inputs to the A to D converters Waves analog input transformers Waves analog output transformers High performance IDR dithering to 16 or 24 bit output Precise input level setting using 1% resistor networks Processing 48 bit end-to-end internal processing path Switchable compressor/MaxxBass® order Compressor Opto/Electro mode selection Threshold (0-60dB), Ratio (1:1-12:1) and Attack (0.5, 1, 2, 5, 10, 20, and 50 ms) controls Proprietary ARC™ Automatic Release Control Automatic gain makeup. MaxxBass® Adjustable processor frequency from 25Hz to 120Hz Adjustable harmonic mix percentage from 0 to 100% High Pass Filter "harmonics only" option Limiter Overshoot-free Look-ahead processing Adjustable Threshold (0-18dB) Adjustable Output Ceiling (0-18dBFS) Dimensions Length: 48.3cm / 19 inches Height: 8.6 cm / 3.4 inches Depth: 24.7 cm / 9.75 inches Analog input stage: Maximum Analog Input Gain: 24 dBu Input Impedance, Balanced Input: 32 kOhm@1kHz Analog output stage: Maximum Output: +24dBu Output Impedance 600 Ω ADC (@44.1kHz): Frequency response: 10Hz - 24 kHz / -0.1dB@10Hz / 0.01@24k THD + Noise: ≤ 0.0006 % @ 1kHz @ -1dBFS THD 3rd Harmonic: -126 dBFS @1kHz, -10dBFS DAC (@44.1kHz): Frequency response: 20Hz-21kHz / - 0.4dB@20Hz / 0.05dB@21kHz Noise: ≤ -108 dB (unweighted) THD+Noise: ≤ 0.003% @1kHz, -1dBFS Maximum Output: +24dBu Output Impedance: 600 ohms @ 1kHz Crosstalk: ≤ -102 dB (1kHz, 0 dBFS) THD+N: ≤ 0.003% @ 1kHz un-weighted Frequency response: -0.4 dB@20Hz / 0.05 @ 21kHz Latency (in samples): Digital to Digital: 133 @44.1, 48kHz, 261 @88.2, 96kHz Analog to Digital: 176 @44.1, 48kHz, 301 @88.2, 96kHz Digital to Analog: 182 @44.1, 48kHz, 313 @88.2, 96kHz Analog to Analog: 225 @44.1, 48kHz, 353 @88.2, 96kHz User Interface Clear backlit displays, meters and buttons are visible in all lighting conditions THD + Noise: ≤ 0.0006 % @ 1kHz @ -1dBFS Precision Metering with resettable peak hold options (2 sec, infinite) Accurate, wide range metering covering 90dB for input and output and 12dB for compressor and limiter attenuation Quick access independent bypass on each processing block Tactile feedback knobs 4 easy store/recall user presets
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Type: | Dynamic Range Processor |
| Form Factor: | Rack-Mountable | Effect/Enhancement: | Compression/Limiting, Harmonic Enhancement |
| Number of Channels: | 2 | Model: | MAXX BCL |
| Brand: | Waves |
Waves max bcl been used on my home studio for the past 3 years,for voice over production wasn't used too long probably had once or twice per month,it works great and sounds great I've always used through spidif outputs and controlled from pro tools interface which it sounds amazing but it's about time to get the Manley mastering processors Please ask any question before to buy No returns or money back Thanks WAVES MaxxBCL Hardware Processor Unit Input / Output Analog, AES/EBU, SPDIF Independent rear panel input and output headroom calibration in 6 steps (+9, 12, 15, 18, 20 and 24 dBu) Passive analog inputs to the A to D converters Waves analog input transformers Waves analog output transformers High performance IDR dithering to 16 or 24 bit output Precise input level setting using 1% resistor networks Processing 48 bit end-to-end internal processing path Switchable compressor/MaxxBass® order Compressor Opto/Electro mode selection Threshold (0-60dB), Ratio (1:1-12:1) and Attack (0.5, 1, 2, 5, 10, 20, and 50 ms) controls Proprietary ARC™ Automatic Release Control Automatic gain makeup. MaxxBass® Adjustable processor frequency from 25Hz to 120Hz Adjustable harmonic mix percentage from 0 to 100% High Pass Filter "harmonics only" option Limiter Overshoot-free Look-ahead processing Adjustable Threshold (0-18dB) Adjustable Output Ceiling (0-18dBFS) Dimensions Length: 48.3cm / 19 inches Height: 8.6 cm / 3.4 inches Depth: 24.7 cm / 9.75 inches Analog input stage: Maximum Analog Input Gain: 24 dBu Input Impedance, Balanced Input: 32 kOhm@1kHz Analog output stage: Maximum Output: +24dBu Output Impedance 600 Ω ADC (@44.1kHz): Frequency response: 10Hz - 24 kHz / -0.1dB@10Hz / 0.01@24k THD + Noise: ≤ 0.0006 % @ 1kHz @ -1dBFS THD 3rd Harmonic: -126 dBFS @1kHz, -10dBFS DAC (@44.1kHz): Frequency response: 20Hz-21kHz / - 0.4dB@20Hz / 0.05dB@21kHz Noise: ≤ -108 dB (unweighted) THD+Noise: ≤ 0.003% @1kHz, -1dBFS Maximum Output: +24dBu Output Impedance: 600 ohms @ 1kHz Crosstalk: ≤ -102 dB (1kHz, 0 dBFS) THD+N: ≤ 0.003% @ 1kHz un-weighted Frequency response: -0.4 dB@20Hz / 0.05 @ 21kHz Latency (in samples): Digital to Digital: 133 @44.1, 48kHz, 261 @88.2, 96kHz Analog to Digital: 176 @44.1, 48kHz, 301 @88.2, 96kHz Digital to Analog: 182 @44.1, 48kHz, 313 @88.2, 96kHz Analog to Analog: 225 @44.1, 48kHz, 353 @88.2, 96kHz User Interface Clear backlit displays, meters and buttons are visible in all lighting conditions THD + Noise: ≤ 0.0006 % @ 1kHz @ -1dBFS Precision Metering with resettable peak hold options (2 sec, infinite) Accurate, wide range metering covering 90dB for input and output and 12dB for compressor and limiter attenuation Quick access independent bypass on each processing block Tactile feedback knobs 4 easy store/recall user presets