Back to the main page Back to category Aviom Mix320d Co
musical instrument details
AVIOM MIX320-D Complete (6) Performer Personal Audio Mix Dante Touring System
Estimated price for orientation: 3 499 $
Category: Aviom Mix320d Co
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Suited For: Stage/Live Sound, Studio/Recording Inputs/Outputs: RJ45, Headphone TRS 1/4" Out, RJ-45 Interface, 1/8" TRS stereo Analog/Digital: Digital MPN: MIX320-D Powered/Non-Powered: Non-Powered Model: MIX320-D Brand: AVIOM Country/Region of Manufacture: United States Number of Channels: 32 UPC: Does not apply
MIX320-A AVIOM Personal Mixing System Aviom’s Mix320-D Personal Mixing System has been designed specifically for use with Dante™ enabled consoles and networks. It includes everything you need to create a personal mixing system for six performers. The A320 Personal Mixers get their digital data and power over the same cable, so all you need to do is connect a Cat-5 cable and you're ready to start using the system. The Mix320-D Personal Mixing System makes it easy to add Aviom monitoring to a Dante-enabled mixing console or audio network. No analog input module or console card is required; inputs get patched directly from your Dante network. The Mix320-D system includes a D400-Dante A-Net Distributor that allows up to 32 channels to be patched from the Dante network to the personal mixing system inputs. The D400-Dante is also used to supply A-Net digital data and DC power to the mixers. The Mix320-D system includes six A320 Personal Mixer for the performers, plus six MT-1a Mic Stand Mounts for attaching the A320 mixers to mic stands, as well as all the Cat-5e cables you'll need to connect the products. Intuitive Mixing The A320 Personal Mixer gives performing and recording musicians simple, intuitive control over their monitor mixes. It features a 32-channel mix engine with 16 mono or stereo mix channels buttons and easy to use Stereo Placement controls. Connect headphones, ear buds, or a wireless in-ear monitoring system to the Personal Mixer and you're ready to start mixing. Distribute Power and Audio Over Cat-5
For distributing the A-Net digital data and DC power to the A320 Personal Mixers, the system includes the D400-Dante A-Net Distributor. The D400-Dante also serves as the system's input device; it allows up to 32 channels from your Dante network to be assigned to the eight powered A-Net ports on its front panel. Stereo Link switches allow adjacent channels to be treated as a stereo pairs on the A320 Personal Mixers where they will appear on a single mix channel button. System Options
The Mix320-D system uses a Dante network for its inputs. If you use a digital console, check out the Mix320-Y Personal Mixing System which includes a Y1 card for Yamaha® consoles for its inputs. Or, if you have an analog console or recording system, the Mix320-A Personal Mixing System is what you need. It includes the 16-channel, line-level AN-16/i Input Module as its front end. The mixing system packages are also easy to expand when you're ready—just add more Personal Mixers and A-Net Distributors as needed. Includes: (1) D400-Dante A-Net Distributor (6) A320 Personal Mixers (6) MT-1a Mic Stand Mounts (7) Cat-5e cables A320 Specifications: Audio Output: 1/4" TRS stereo, headphone or line level Stereo Mix Output, Headphone/Line Tip: Audio Left Ring: Audio Right Sleeve: Ground A-Net I/O: 1 A-Net In, RJ45 connector; Supports Pro16and Pro16e D/A Conversion: 44.1/48kHz, 24-bit Stereo Operation: Stereo Link, per channel pair set at the input module Variable pan per mono channel or pan/spread per stereo channel pair Headphone Output: 275 mW per side into 50 Ohms (both sides driven) Output Impedance: 5 Ohms Freq. Response: 3Hz-22kHz +0.2dB/-3dB at 50 Ohms THD +N: < 0.003% Output Voltage for Personal Mixers: 24VDC, 0.5 amp transmitted over the Cat-5e cable Signal to Noise (unweighted): -106dB (measured with zero data into all channels) Latency: 0.880 msec (measured from analog input to analog output) Pro16e A-Net: Use Cat-5e (or better) cable Maximum 400 ft (122 m) between devices Supports Power Over A-NetCat-5 cable: Use shielded Cat-5e (or better) cable to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Power: 24 VDC, 0.5 amp Power is supplied over the Cat-5 cable when connected to an Aviom A-Net Distributor: Dimensions: 10.26" (260.6 mm) wide x 6.14" (155.95mm) deep x 1.91" (48.51 mm) high Weight: 1.3 lbs. (0.59 kg) Optional: MT-1a Mic Stand Mount D400-Dante Specifications: Dante Interface: 32 channels (44.1/48kHz Sample Rate) Dante Primary I/O: RJ45 connector Dante Secondary I/O: RJ45 connector Dante LEDs: Network Activity (Green); 1GB Network Connection Active (Yellow) A-Net Out to Personal Mixers: Eight RJ45 connectors, powered A-Net Out: Pro16e A-Net RJ45 connector, unpowered LEDs: Power On (Red); Network Sync (Green) Stereo Link: Two 8-position DIP switch blocks (1-16,17-32) Output Voltage for Personal Mixers: 24VDC, 0.5 amp Transmitted over the Cat-5e cable A-Net Cables: Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Unshielded Cat-5e cable may be used on all rear panel connections Power Supply: Internal, IEC connector Input Voltage: 100-120 VAC or 200-240 VAC (with selector switch); 50-60Hz @220 W max AC Fuse Types: 115V range: T2.5AL/250V, 230V range: T1.25AL/250V Dimensions: 19" (482.6 mm) wide x 7.386" (187.6 mm) deep; 2U, 3.5" (88.9 mm) high Weight: 12 lbs. (5.44 kg) SALE: $3499.99 WANT IT FOR LESS...CLICK me IN SELLER INFORMATION BOX VISIT OUR 'PRO' LIGHTINGELSTORE FREE S&H in continental US (e-mail for international / offshore USA rates)
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Suited For: | Stage/Live Sound, Studio/Recording |
| Inputs/Outputs: | RJ45, Headphone TRS 1/4" Out, RJ-45 Interface, 1/8" TRS stereo | Analog/Digital: | Digital |
| MPN: | MIX320-D | Powered/Non-Powered: | Non-Powered |
| Model: | MIX320-D | Brand: | AVIOM |
| Country/Region of Manufacture: | United States | Number of Channels: | 32 |
| UPC: | Does not apply |
MIX320-A AVIOM Personal Mixing System Aviom’s Mix320-D Personal Mixing System has been designed specifically for use with Dante™ enabled consoles and networks. It includes everything you need to create a personal mixing system for six performers. The A320 Personal Mixers get their digital data and power over the same cable, so all you need to do is connect a Cat-5 cable and you're ready to start using the system. The Mix320-D Personal Mixing System makes it easy to add Aviom monitoring to a Dante-enabled mixing console or audio network. No analog input module or console card is required; inputs get patched directly from your Dante network. The Mix320-D system includes a D400-Dante A-Net Distributor that allows up to 32 channels to be patched from the Dante network to the personal mixing system inputs. The D400-Dante is also used to supply A-Net digital data and DC power to the mixers. The Mix320-D system includes six A320 Personal Mixer for the performers, plus six MT-1a Mic Stand Mounts for attaching the A320 mixers to mic stands, as well as all the Cat-5e cables you'll need to connect the products. Intuitive Mixing The A320 Personal Mixer gives performing and recording musicians simple, intuitive control over their monitor mixes. It features a 32-channel mix engine with 16 mono or stereo mix channels buttons and easy to use Stereo Placement controls. Connect headphones, ear buds, or a wireless in-ear monitoring system to the Personal Mixer and you're ready to start mixing. Distribute Power and Audio Over Cat-5
For distributing the A-Net digital data and DC power to the A320 Personal Mixers, the system includes the D400-Dante A-Net Distributor. The D400-Dante also serves as the system's input device; it allows up to 32 channels from your Dante network to be assigned to the eight powered A-Net ports on its front panel. Stereo Link switches allow adjacent channels to be treated as a stereo pairs on the A320 Personal Mixers where they will appear on a single mix channel button. System Options
The Mix320-D system uses a Dante network for its inputs. If you use a digital console, check out the Mix320-Y Personal Mixing System which includes a Y1 card for Yamaha® consoles for its inputs. Or, if you have an analog console or recording system, the Mix320-A Personal Mixing System is what you need. It includes the 16-channel, line-level AN-16/i Input Module as its front end. The mixing system packages are also easy to expand when you're ready—just add more Personal Mixers and A-Net Distributors as needed. Includes: (1) D400-Dante A-Net Distributor (6) A320 Personal Mixers (6) MT-1a Mic Stand Mounts (7) Cat-5e cables A320 Specifications: Audio Output: 1/4" TRS stereo, headphone or line level Stereo Mix Output, Headphone/Line Tip: Audio Left Ring: Audio Right Sleeve: Ground A-Net I/O: 1 A-Net In, RJ45 connector; Supports Pro16and Pro16e D/A Conversion: 44.1/48kHz, 24-bit Stereo Operation: Stereo Link, per channel pair set at the input module Variable pan per mono channel or pan/spread per stereo channel pair Headphone Output: 275 mW per side into 50 Ohms (both sides driven) Output Impedance: 5 Ohms Freq. Response: 3Hz-22kHz +0.2dB/-3dB at 50 Ohms THD +N: < 0.003% Output Voltage for Personal Mixers: 24VDC, 0.5 amp transmitted over the Cat-5e cable Signal to Noise (unweighted): -106dB (measured with zero data into all channels) Latency: 0.880 msec (measured from analog input to analog output) Pro16e A-Net: Use Cat-5e (or better) cable Maximum 400 ft (122 m) between devices Supports Power Over A-NetCat-5 cable: Use shielded Cat-5e (or better) cable to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Power: 24 VDC, 0.5 amp Power is supplied over the Cat-5 cable when connected to an Aviom A-Net Distributor: Dimensions: 10.26" (260.6 mm) wide x 6.14" (155.95mm) deep x 1.91" (48.51 mm) high Weight: 1.3 lbs. (0.59 kg) Optional: MT-1a Mic Stand Mount D400-Dante Specifications: Dante Interface: 32 channels (44.1/48kHz Sample Rate) Dante Primary I/O: RJ45 connector Dante Secondary I/O: RJ45 connector Dante LEDs: Network Activity (Green); 1GB Network Connection Active (Yellow) A-Net Out to Personal Mixers: Eight RJ45 connectors, powered A-Net Out: Pro16e A-Net RJ45 connector, unpowered LEDs: Power On (Red); Network Sync (Green) Stereo Link: Two 8-position DIP switch blocks (1-16,17-32) Output Voltage for Personal Mixers: 24VDC, 0.5 amp Transmitted over the Cat-5e cable A-Net Cables: Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Unshielded Cat-5e cable may be used on all rear panel connections Power Supply: Internal, IEC connector Input Voltage: 100-120 VAC or 200-240 VAC (with selector switch); 50-60Hz @220 W max AC Fuse Types: 115V range: T2.5AL/250V, 230V range: T1.25AL/250V Dimensions: 19" (482.6 mm) wide x 7.386" (187.6 mm) deep; 2U, 3.5" (88.9 mm) high Weight: 12 lbs. (5.44 kg)
For distributing the A-Net digital data and DC power to the A320 Personal Mixers, the system includes the D400-Dante A-Net Distributor. The D400-Dante also serves as the system's input device; it allows up to 32 channels from your Dante network to be assigned to the eight powered A-Net ports on its front panel. Stereo Link switches allow adjacent channels to be treated as a stereo pairs on the A320 Personal Mixers where they will appear on a single mix channel button. System Options
The Mix320-D system uses a Dante network for its inputs. If you use a digital console, check out the Mix320-Y Personal Mixing System which includes a Y1 card for Yamaha® consoles for its inputs. Or, if you have an analog console or recording system, the Mix320-A Personal Mixing System is what you need. It includes the 16-channel, line-level AN-16/i Input Module as its front end. The mixing system packages are also easy to expand when you're ready—just add more Personal Mixers and A-Net Distributors as needed. Includes: (1) D400-Dante A-Net Distributor (6) A320 Personal Mixers (6) MT-1a Mic Stand Mounts (7) Cat-5e cables A320 Specifications: Audio Output: 1/4" TRS stereo, headphone or line level Stereo Mix Output, Headphone/Line Tip: Audio Left Ring: Audio Right Sleeve: Ground A-Net I/O: 1 A-Net In, RJ45 connector; Supports Pro16and Pro16e D/A Conversion: 44.1/48kHz, 24-bit Stereo Operation: Stereo Link, per channel pair set at the input module Variable pan per mono channel or pan/spread per stereo channel pair Headphone Output: 275 mW per side into 50 Ohms (both sides driven) Output Impedance: 5 Ohms Freq. Response: 3Hz-22kHz +0.2dB/-3dB at 50 Ohms THD +N: < 0.003% Output Voltage for Personal Mixers: 24VDC, 0.5 amp transmitted over the Cat-5e cable Signal to Noise (unweighted): -106dB (measured with zero data into all channels) Latency: 0.880 msec (measured from analog input to analog output) Pro16e A-Net: Use Cat-5e (or better) cable Maximum 400 ft (122 m) between devices Supports Power Over A-NetCat-5 cable: Use shielded Cat-5e (or better) cable to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Power: 24 VDC, 0.5 amp Power is supplied over the Cat-5 cable when connected to an Aviom A-Net Distributor: Dimensions: 10.26" (260.6 mm) wide x 6.14" (155.95mm) deep x 1.91" (48.51 mm) high Weight: 1.3 lbs. (0.59 kg) Optional: MT-1a Mic Stand Mount D400-Dante Specifications: Dante Interface: 32 channels (44.1/48kHz Sample Rate) Dante Primary I/O: RJ45 connector Dante Secondary I/O: RJ45 connector Dante LEDs: Network Activity (Green); 1GB Network Connection Active (Yellow) A-Net Out to Personal Mixers: Eight RJ45 connectors, powered A-Net Out: Pro16e A-Net RJ45 connector, unpowered LEDs: Power On (Red); Network Sync (Green) Stereo Link: Two 8-position DIP switch blocks (1-16,17-32) Output Voltage for Personal Mixers: 24VDC, 0.5 amp Transmitted over the Cat-5e cable A-Net Cables: Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Unshielded Cat-5e cable may be used on all rear panel connections Power Supply: Internal, IEC connector Input Voltage: 100-120 VAC or 200-240 VAC (with selector switch); 50-60Hz @220 W max AC Fuse Types: 115V range: T2.5AL/250V, 230V range: T1.25AL/250V Dimensions: 19" (482.6 mm) wide x 7.386" (187.6 mm) deep; 2U, 3.5" (88.9 mm) high Weight: 12 lbs. (5.44 kg)
SALE: $3499.99 WANT IT FOR LESS...CLICK me IN SELLER INFORMATION BOX VISIT OUR 'PRO' LIGHTINGELSTORE FREE S&H in continental US (e-mail for international / offshore USA rates)