Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Audio-Technica |
| Model: | AE2500 | MPN: | AE2500 |
| UPC: | 0042005128983 |
Revolutionary dual-element design represents a ground-breaking transducer achievementTwo elements (condenser and dynamic) are enclosed in a single housingDynamic element delivers the aggressive attack of the beater while the condenser captures the round tonalities of the shellElements are positioned in a perfect phase relationship, something practically unachievable with two separate microphonesRobust design for enduring dependability on the roadIntegral 80 Hz HPF switch and 10 dB pad on condenser elementIncludes isolation clamp for shock protection, secure mounting and easy positioningIncludes a 16.5' (5 m) cable (5-pin XLRF to two standard 3-pin XLRM connectors) for separate control over each element | ELEMENTS: Condenser, dynamicPOLAR PATTERN: CardioidFREQUENCY RESPONSE: 20-17,000 Hz (condenser); 30-10,000 Hz (dynamic)LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave (condenser)OPEN CIRCUIT SENSITIVITY: -51 dB (2.8 mV) re 1V at 1 Pa (condenser); -54 dB (1.9 mV) re 1V at 1 Pa (dynamic)IMPEDANCE: 100 ohms (condenser); 600 ohms (dynamic)MAXIMUM INPUT SOUND LEVEL: 148 dB SPL, 1 kHz at 1% T.H.D. (condenser); 158 dB SPL, with 10 dB pad (nominal)DYNAMIC RANGE (TYPICAL): 124 dB, 1 kHz at Max SPL (condenser)SIGNAL-TO-NOISE RATIO: 70 dB, 1 kHz at 1 Pa (condenser)PHANTOM POWER REQUIREMENTS: 11-52V DC, 3 mA typical (condenser)SWITCHES (Condenser Only): High-pass filter; 10 dB pad (nominal)WEIGHT: 13.8 oz (390 g)DIMENSIONS: 6.50" (165.0 mm) long, 2.17" (55.0 mm) maximum diameterOUTPUT CONNECTOR: Integral 5-pin XLRM-typeCABLE: 16.5' (5 m) dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectorsACCESSORIES FURNISHED: AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouchAUDIO-TECHNICA CASE STYLE: R8 |
