Back to the main page Back to category Other Pro Audio Equipment
musical instrument details
Marti Synthesized RPU Transmitter SRPT-40 SRPT 40
Estimated price for orientation: 999 $
Category: Other Pro Audio Equipment
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Lightner Electronics Model: Marti SRPT-40 MPN: Marti SRPT-40
The SRPT 40 is our most powerful RPU transmitter. The synthesizer and RF power amp technology was developed for the composite STL and has been incorporated into the SRPT 40A. Now you can dial the exact frequency for the selected band from the front panel.• Frequency Range and Continuous Duty Maximum Power Output 50 ohms (+10%): 430-480 MHz, 40 Watts
• Frequency Selection: Fully frequency agile from 430 MHz to 480 MHz
• Front Panel Controls: Input Level, Meter Select Switch, Encode, Execute, Frequency Select Switches, Power Adjust POT, Transmit/Standby
• Metering: FWD Power, Rev. Power, PA Current, B+, Audio Compression, LEDs: Transmit, AFC Lock, High VSWR, and High Temp
• Modulation Control: Broadcast quality compressor limiter built in
• Audio Inputs: Four balanced XLR mic inputs with gain, one input switchable to balanced line level; No. 4 input and "D" connector on rear
• Audio Input Level: mic input level can be from -68 dB to -35 dB. High level can be from 0 to +10 dBm 8-600 ohms
• Encoding: Sub-audible tone (27 Hz) encoder built in.
• Accessory Connector: 15 pin "D" connector, DC power (12.5-16 VDC or 16-30 VDC), Remote Control, encode, line level input.
• RF Output Impedance: 50 ohms.
• Power Requirements: 110-125 VAC, 50-60 Hz: DC Power (12.5-16 VDC or 16-30 VDC), 8-10 Amps.
• Dimensions: 3.5"H x 11.5"W x 13.5"D Weight: Net 8 lbs., Shipping 14 lbs.
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Lightner Electronics |
| Model: | Marti SRPT-40 | MPN: | Marti SRPT-40 |
The SRPT 40 is our most powerful RPU transmitter. The synthesizer and RF power amp technology was developed for the composite STL and has been incorporated into the SRPT 40A. Now you can dial the exact frequency for the selected band from the front panel.• Frequency Range and Continuous Duty Maximum Power Output 50 ohms (+10%): 430-480 MHz, 40 Watts
• Frequency Selection: Fully frequency agile from 430 MHz to 480 MHz
• Front Panel Controls: Input Level, Meter Select Switch, Encode, Execute, Frequency Select Switches, Power Adjust POT, Transmit/Standby
• Metering: FWD Power, Rev. Power, PA Current, B+, Audio Compression, LEDs: Transmit, AFC Lock, High VSWR, and High Temp
• Modulation Control: Broadcast quality compressor limiter built in
• Audio Inputs: Four balanced XLR mic inputs with gain, one input switchable to balanced line level; No. 4 input and "D" connector on rear
• Audio Input Level: mic input level can be from -68 dB to -35 dB. High level can be from 0 to +10 dBm 8-600 ohms
• Encoding: Sub-audible tone (27 Hz) encoder built in.
• Accessory Connector: 15 pin "D" connector, DC power (12.5-16 VDC or 16-30 VDC), Remote Control, encode, line level input.
• RF Output Impedance: 50 ohms.
• Power Requirements: 110-125 VAC, 50-60 Hz: DC Power (12.5-16 VDC or 16-30 VDC), 8-10 Amps.
• Dimensions: 3.5"H x 11.5"W x 13.5"D Weight: Net 8 lbs., Shipping 14 lbs.
• Frequency Selection: Fully frequency agile from 430 MHz to 480 MHz
• Front Panel Controls: Input Level, Meter Select Switch, Encode, Execute, Frequency Select Switches, Power Adjust POT, Transmit/Standby
• Metering: FWD Power, Rev. Power, PA Current, B+, Audio Compression, LEDs: Transmit, AFC Lock, High VSWR, and High Temp
• Modulation Control: Broadcast quality compressor limiter built in
• Audio Inputs: Four balanced XLR mic inputs with gain, one input switchable to balanced line level; No. 4 input and "D" connector on rear
• Audio Input Level: mic input level can be from -68 dB to -35 dB. High level can be from 0 to +10 dBm 8-600 ohms
• Encoding: Sub-audible tone (27 Hz) encoder built in.
• Accessory Connector: 15 pin "D" connector, DC power (12.5-16 VDC or 16-30 VDC), Remote Control, encode, line level input.
• RF Output Impedance: 50 ohms.
• Power Requirements: 110-125 VAC, 50-60 Hz: DC Power (12.5-16 VDC or 16-30 VDC), 8-10 Amps.
• Dimensions: 3.5"H x 11.5"W x 13.5"D Weight: Net 8 lbs., Shipping 14 lbs.