Back to the main page Back to category AudioTechnica AE
musical instrument details
AUDIO-TECHNICA AE2500 Dual-element Cardioid Instrument Microphone
Estimated price for orientation: 553 $
Category: AudioTechnica AE
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: AUDIO-TECHNICA Model: AE2500 MPN: 4961310100148 Country/Region of Manufacture: Japan UPC: 4961310100148
Description Revolutionary dual-element design represents a ground-breaking transducer achievement
Two elements (condenser and dynamic) are enclosed in a single housing
Dynamic element delivers the aggressive attack of the beater while the condenser captures the round tonalities of the shell
Elements are positioned in a perfect phase relationship, something practically unachievable with two separate microphones
Robust design for enduring dependability on the road
Integral 80 Hz HPF switch and 10 dB pad on condenser element
Includes isolation clamp for shock protection, secure mounting and easy positioning
Includes a 16.5' (5 m) cable (5-pin XLRF to two standard 3-pin XLRM connectors) for separate control over each elementELEMENTS: Condenser, dynamic
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 20-17,000 Hz (condenser)
30-10,000 Hz (dynamic)
LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave (condenser)
OPEN CIRCUIT SENSITIVITY: -51 dB (2.8 mV) re 1V at 1 Pa (condenser)
-54 dB (1.9 mV) re 1V at 1 Pa (dynamic)
IMPEDANCE: 100 ohms (condenser)
600 ohms (dynamic)
MAXIMUM INPUT SOUND LEVEL: 148 dB SPL, 1 kHz at 1% T.H.D. (condenser);
158 dB SPL, with 10 dB pad (nominal)
DYNAMIC RANGE (typical): 124 dB, 1 kHz at Max SPL (condenser)
SIGNAL-TO-NOISE RATIO: 70 dB, 1 kHz at 1 Pa (condenser)
PHANTOM POWER REQUIREMENTS: 11-52V DC, 3 mA typical (condenser)
SWITCHES: (Condenser Only) High-pass filter;
10 dB pad (nominal)
WEIGHT: 13.8 oz (390 g)
DIMENSIONS: 6.50" (165.0 mm) long,
2.17" (55.0 mm) maximum diameter
OUTPUT CONNECTOR: Integral 5-pin XLRM-type
CABLE: 16.5' (5 m) dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors
ACCESSORIES FURNISHED: AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch Payment Only accepts payments for eBay orders through PayPal. Shipping Your order will be shipped to you via Japan Post EMS. Japan Post is a speedy delivery service that delivers to more than 120 countries.With an effective tracking system and insurance program, EMS is able to offer a secure delivery worldwide.You can track your package with the tracking code provided.If the item was damaged, please take the damaged item along with all packaging into your local post office to assess and a damage report to be completed. Returns All Sales are final for our eBay store, If you need additional picture and information, feel free to contact us.This item is returnable only if defective OR unopened or unused. International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as "gifts" -US and International government regulations prohibit such behavior.
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | AUDIO-TECHNICA |
| Model: | AE2500 | MPN: | 4961310100148 |
| Country/Region of Manufacture: | Japan | UPC: | 4961310100148 |
Description Revolutionary dual-element design represents a ground-breaking transducer achievement
Two elements (condenser and dynamic) are enclosed in a single housing
Dynamic element delivers the aggressive attack of the beater while the condenser captures the round tonalities of the shell
Elements are positioned in a perfect phase relationship, something practically unachievable with two separate microphones
Robust design for enduring dependability on the road
Integral 80 Hz HPF switch and 10 dB pad on condenser element
Includes isolation clamp for shock protection, secure mounting and easy positioning
Includes a 16.5' (5 m) cable (5-pin XLRF to two standard 3-pin XLRM connectors) for separate control over each elementELEMENTS: Condenser, dynamic
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 20-17,000 Hz (condenser)
30-10,000 Hz (dynamic)
LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave (condenser)
OPEN CIRCUIT SENSITIVITY: -51 dB (2.8 mV) re 1V at 1 Pa (condenser)
-54 dB (1.9 mV) re 1V at 1 Pa (dynamic)
IMPEDANCE: 100 ohms (condenser)
600 ohms (dynamic)
MAXIMUM INPUT SOUND LEVEL: 148 dB SPL, 1 kHz at 1% T.H.D. (condenser);
158 dB SPL, with 10 dB pad (nominal)
DYNAMIC RANGE (typical): 124 dB, 1 kHz at Max SPL (condenser)
SIGNAL-TO-NOISE RATIO: 70 dB, 1 kHz at 1 Pa (condenser)
PHANTOM POWER REQUIREMENTS: 11-52V DC, 3 mA typical (condenser)
SWITCHES: (Condenser Only) High-pass filter;
10 dB pad (nominal)
WEIGHT: 13.8 oz (390 g)
DIMENSIONS: 6.50" (165.0 mm) long,
2.17" (55.0 mm) maximum diameter
OUTPUT CONNECTOR: Integral 5-pin XLRM-type
CABLE: 16.5' (5 m) dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors
ACCESSORIES FURNISHED: AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch Payment Only accepts payments for eBay orders through PayPal. Shipping Your order will be shipped to you via Japan Post EMS. Japan Post is a speedy delivery service that delivers to more than 120 countries.With an effective tracking system and insurance program, EMS is able to offer a secure delivery worldwide.You can track your package with the tracking code provided.If the item was damaged, please take the damaged item along with all packaging into your local post office to assess and a damage report to be completed. Returns All Sales are final for our eBay store, If you need additional picture and information, feel free to contact us.This item is returnable only if defective OR unopened or unused. International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as "gifts" -US and International government regulations prohibit such behavior.
Two elements (condenser and dynamic) are enclosed in a single housing
Dynamic element delivers the aggressive attack of the beater while the condenser captures the round tonalities of the shell
Elements are positioned in a perfect phase relationship, something practically unachievable with two separate microphones
Robust design for enduring dependability on the road
Integral 80 Hz HPF switch and 10 dB pad on condenser element
Includes isolation clamp for shock protection, secure mounting and easy positioning
Includes a 16.5' (5 m) cable (5-pin XLRF to two standard 3-pin XLRM connectors) for separate control over each elementELEMENTS: Condenser, dynamic
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 20-17,000 Hz (condenser)
30-10,000 Hz (dynamic)
LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave (condenser)
OPEN CIRCUIT SENSITIVITY: -51 dB (2.8 mV) re 1V at 1 Pa (condenser)
-54 dB (1.9 mV) re 1V at 1 Pa (dynamic)
IMPEDANCE: 100 ohms (condenser)
600 ohms (dynamic)
MAXIMUM INPUT SOUND LEVEL: 148 dB SPL, 1 kHz at 1% T.H.D. (condenser);
158 dB SPL, with 10 dB pad (nominal)
DYNAMIC RANGE (typical): 124 dB, 1 kHz at Max SPL (condenser)
SIGNAL-TO-NOISE RATIO: 70 dB, 1 kHz at 1 Pa (condenser)
PHANTOM POWER REQUIREMENTS: 11-52V DC, 3 mA typical (condenser)
SWITCHES: (Condenser Only) High-pass filter;
10 dB pad (nominal)
WEIGHT: 13.8 oz (390 g)
DIMENSIONS: 6.50" (165.0 mm) long,
2.17" (55.0 mm) maximum diameter
OUTPUT CONNECTOR: Integral 5-pin XLRM-type
CABLE: 16.5' (5 m) dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors
ACCESSORIES FURNISHED: AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch Payment Only accepts payments for eBay orders through PayPal. Shipping Your order will be shipped to you via Japan Post EMS. Japan Post is a speedy delivery service that delivers to more than 120 countries.With an effective tracking system and insurance program, EMS is able to offer a secure delivery worldwide.You can track your package with the tracking code provided.If the item was damaged, please take the damaged item along with all packaging into your local post office to assess and a damage report to be completed. Returns All Sales are final for our eBay store, If you need additional picture and information, feel free to contact us.This item is returnable only if defective OR unopened or unused. International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as "gifts" -US and International government regulations prohibit such behavior.