Back to the main page Back to category Signal Processors or Rack Effect

musical instrument details

Aphex Master Voice Channel 230

Estimated price for orientation: 450 $

Category: Signal Processors or Rack Effect
Class:











Description
Brand: Aphex


OVERVIEW Makes voices sound bigger than life! The Aphex 230 Master Voice Channel Tube Mic Pre is an indispensable broadcast station tool. Youll find them in the production room, or installed as a permanent on-air feed-through for pumping up voices. The Aphex 230 also makes a powerful and easy-to-use channel for home and project studios with its reflected-plate amplifier tube mic preamp design plus compression, gating, de-esser, parametric EQ, aural exciter, and a bottom booster. FEATURES Reflected-plate amplifier tube mic preamp EasyRider compressor Logic assisted gate Split-band de-esser Aural exciter Parametric EQ Big bottom +4 dBu and -10 dBV outputs 24-bit 96 kHz A/D AES, SPDIF and optical outputs Low jitter word clock output Word clock input SPECIFICATIONS 230 Master Voice Channel Tube Mic Pre MIC INPUT  Connector XLR-3F  Type Transformerless, NPN active balanced, tube second stage  Input Z 2k ohms nominal  Maximum Input Level (MIL) 20k ohms  CMRR >70 dB @ 60 Hz  Nominal Preamp Gain 20 to 65 dB  Phantom Power +48VDC  Pad 20dB  EIN -127dBu (Input Shorted)  Tube Type 12AT7/ECC81 Dual Triode  OUTPUT  Connector XLR-3M and 1/4" TRS Phone Jacks  Type XLR is Impedance Balanced (may be used unbalanced); TRS is unbalanced  Out Z Balanced XLR 66 ohms  Out Z Unbalanced XLR 33 ohms; TRS 600 ohms  Nominal Level XLR +4dBu; TRS -10dBV  Maximum Output Level +25dBu Unloaded; TRS +11dBV  COMPRESSOR  Attack / Release Program dependent, user variable release baseline  Ratio 4:1  Threshold Fixed  Knee Medium Hard  GATE  Attack 0.1 millisecond  Hold / Release 300 milliseconds / 400 milliseconds  Threshold Variable -50 to +20dB  Depth Variable, 1 to 58dB  DE-ESSER  Attack 0.1 millisecond  Release 100 milliseconds  Threshold Variable -20 to +20dB  Ratio 5:1  Active Band 4 kHz to 20kHz Linkwitz-Riley 24 db/octave crossover  INSERT  Connector type - Send 1/4" TRS Phone Jack, Balanced  Connector type - Return 1/4" TRS Phone Jack, Balanced  Nominal Operating Level 0 dBu  Point of Insertion Between dynamics processing and equalizers  BIG BOTTOM  Frequency 50 Hz to 280 Hz  Tune Off to +12dB  PARAMETRIC EQ  Frequency Tune 240 Hz to 8 kHz  Peak / Dip ±12dB  Q Range 0.5 to 5  AURAL EXCITER  Frequency Tune 500 Hz to 5kHz  Mix Off to +12dB  ANALOG AUDIO  THD <.01% @ +4dBu Out  IMD <.01% @ +4dBu Out  Freq Response (Flat) 18 Hz to 24kHz ±1dB  DIGITAL AUDIO  Internal Sample Rates 44.1KHz, 48KHz, 88.2KHz, 96KHz  External Sample Rates Automatically syncs to any word clock between 32KHz and 96KHz  Resolution 24 bits  Word Clock Input BNC Jack, High Z, Captures <1Vp-p to 5Vp-p  Word Clock Output BNC Jack, 75 Ohms, 5Vp-p  Dynamic Range Digital dynamic range greater than analog front end  Noise Dither Dithered by analog preamp noise floor. Equivalent to 16-bit digital audio dither.  Level Equivalency -20dBFS Digital = +4dBu Analog  OTHER SPECIFICATIONS  Power requirements 90-250 VAC 50-60 Hz 12W  Dimensions 19"W x 1.75"H x 8.25" D 1 Rack U (482.6mm x 44.5mm x 209.6mm)  Depth Behind Front Panel 7.5" (190.5mm)  Net Weight 6 lbs (2.73 kg)  Shipping Weight 9 lbs (4.1 kg)