Back to the main page Back to category Preamps and Channel Strips
musical instrument details
Langevin Discrete Dual Mono Microphone Preamp w/ EQ - Manley - Rare - Excellent!
Estimated price for orientation: 825 $
Category: Preamps and Channel Strips
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Manley Labs Number of Channels: 2 Type: Microphone Preamp Features: Rack-Mountable Model: Dual Mono Mic Pre
Up for Auction in like new condition an excellent sounding 2 channel mic preamp with EQInfo from the Manufacturer:
This dual-channel microphone preamplifier is our refined version of the historic Langevin AM-4 console channel. We developed our own discrete gain stage to provide for balanced outputs to bring the Langevin brand into the modern age while still retaining that desirable tone that discrete circuitry delivers. No IC's in this unit, please! We also added 1/4" DIRECT INPUTS addressable from the rear panel. The continuously variable plus and minus 10dB shelf EQ's switched turnover points have been chosen carefully at 40 or 80Hz (L.F.) and 8 or 12KHz (H.F.). All EQ can be completely switched out or set to 'flat' positions. Up to 53dB of gain is available to accommodate a wide range of microphones and high-current 48 volt phantom powering is built in. Because the most single influential component in a mic pre has to be the input transformer, this unit features our precision MANLEY mic input transformers which are wound right here in our factory, for that natural sound with a touch of brawn good iron provides. Specs:
Frequency Response0 dB 10 Hz to 20 KHz
<0.05% THD @ 1kHz S/N ratio: 103dB
EIN: -124dB
Gain: 38dB to 53dB (adjustable)
MIC Input Impedance: 2400 Ohm BALANCED TRANSFORMER COUPLED
DIRECT Input Impedance: 23 kOhm UNBALANCED 1/4"
Output Impedance: 11 Ohm XLR, 6 Ohm 1/4" all-discrete outputs
Maximum output: +31dBv
Power Consumption (120/240 VAC): 12 watts
Factory set for 100V, 120V or 220-240VAC operation for original destination country's mains voltage.
Operating Mains Voltage changeable with power transformer changeover switch and fuse value change.
Mains Voltage Frequency: 50~ 60Hz
Dimensions: 19" X 1 3/4" X 10" (occupies 1u)
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Manley Labs |
| Number of Channels: | 2 | Type: | Microphone Preamp |
| Features: | Rack-Mountable | Model: | Dual Mono Mic Pre |
Up for Auction in like new condition an excellent sounding 2 channel mic preamp with EQInfo from the Manufacturer:
This dual-channel microphone preamplifier is our refined version of the historic Langevin AM-4 console channel. We developed our own discrete gain stage to provide for balanced outputs to bring the Langevin brand into the modern age while still retaining that desirable tone that discrete circuitry delivers. No IC's in this unit, please! We also added 1/4" DIRECT INPUTS addressable from the rear panel. The continuously variable plus and minus 10dB shelf EQ's switched turnover points have been chosen carefully at 40 or 80Hz (L.F.) and 8 or 12KHz (H.F.). All EQ can be completely switched out or set to 'flat' positions. Up to 53dB of gain is available to accommodate a wide range of microphones and high-current 48 volt phantom powering is built in. Because the most single influential component in a mic pre has to be the input transformer, this unit features our precision MANLEY mic input transformers which are wound right here in our factory, for that natural sound with a touch of brawn good iron provides. Specs:
Frequency Response0 dB 10 Hz to 20 KHz
<0.05% THD @ 1kHz S/N ratio: 103dB
EIN: -124dB
Gain: 38dB to 53dB (adjustable)
MIC Input Impedance: 2400 Ohm BALANCED TRANSFORMER COUPLED
DIRECT Input Impedance: 23 kOhm UNBALANCED 1/4"
Output Impedance: 11 Ohm XLR, 6 Ohm 1/4" all-discrete outputs
Maximum output: +31dBv
Power Consumption (120/240 VAC): 12 watts
Factory set for 100V, 120V or 220-240VAC operation for original destination country's mains voltage.
Operating Mains Voltage changeable with power transformer changeover switch and fuse value change.
Mains Voltage Frequency: 50~ 60Hz
Dimensions: 19" X 1 3/4" X 10" (occupies 1u)
This dual-channel microphone preamplifier is our refined version of the historic Langevin AM-4 console channel. We developed our own discrete gain stage to provide for balanced outputs to bring the Langevin brand into the modern age while still retaining that desirable tone that discrete circuitry delivers. No IC's in this unit, please! We also added 1/4" DIRECT INPUTS addressable from the rear panel. The continuously variable plus and minus 10dB shelf EQ's switched turnover points have been chosen carefully at 40 or 80Hz (L.F.) and 8 or 12KHz (H.F.). All EQ can be completely switched out or set to 'flat' positions. Up to 53dB of gain is available to accommodate a wide range of microphones and high-current 48 volt phantom powering is built in. Because the most single influential component in a mic pre has to be the input transformer, this unit features our precision MANLEY mic input transformers which are wound right here in our factory, for that natural sound with a touch of brawn good iron provides. Specs:
Frequency Response0 dB 10 Hz to 20 KHz
<0.05% THD @ 1kHz S/N ratio: 103dB
EIN: -124dB
Gain: 38dB to 53dB (adjustable)
MIC Input Impedance: 2400 Ohm BALANCED TRANSFORMER COUPLED
DIRECT Input Impedance: 23 kOhm UNBALANCED 1/4"
Output Impedance: 11 Ohm XLR, 6 Ohm 1/4" all-discrete outputs
Maximum output: +31dBv
Power Consumption (120/240 VAC): 12 watts
Factory set for 100V, 120V or 220-240VAC operation for original destination country's mains voltage.
Operating Mains Voltage changeable with power transformer changeover switch and fuse value change.
Mains Voltage Frequency: 50~ 60Hz
Dimensions: 19" X 1 3/4" X 10" (occupies 1u)