Back to the main page Back to category Audio or MIDI Interfaces
musical instrument details
Chamsys SMPTE / MIDI USB Interface
Estimated price for orientation: 850 $
Category: Audio or MIDI Interfaces
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Type: MIDI Interface Inputs/Outputs: USB Interface Additional Inputs/Outputs: USB Interface
This is a very pampered Chamsys MIDI / SMPTE interface for use on PC-based MagicQ DMX consoles. If you're looking for the ability to unlock your MagicQ PC software for additional features normally 'locked out' by the lack of a wing or DMX interface, this unit will do the trick. These units sell for approximately $1100 new and are hard to find at this price. Thanks for checking out our listing! Here are some of the main features of the unit: Multipurpose MIDI and LTC Timecode Interface MIDI notes and MIDI show control
MIDI Timecode, EBU25, SMPTE30, NTSC30, Film 24Connects via USB to MagicQ PC/Mac or MagicQ consoles to provide support for MIDI in, MIDI out, LTC in, LTC out.All the common timecode protocols including EBU25, SMPTE30, NTSC30, Film 24. MIDI input can be used to trigger playbacks and other features via MIDI notes. MagicQ can be programmed to trigger specific playbacks/cues/macros from specific MIDI notes*.The Interface supports standard MIDI Show Control for triggering Cues and Cue Stacks. This enables MagicQ to be used together with other consoles/software and systems that support the MIDI Show Control protocol.MIDI Notes commands can be output from each Cue in Cue Stacks using simple MIDI strings.MagicQ Pro2014 console's have a built in MIDI/Timecode module as standard with MIDI in, MIDI out, LTC in and LTC out..MagicQ MIDI/Timecode Interface comes with a USB cable and instruction sheet.For security reasons MagicQ limits the number of playbacks that can be controlled using MIDI and the remote protocols. On MagicQ consoles PB1 to PB34 can be controlled. On MagicQ PC, playbacks PB1 to PB10 can be controlled.
FeaturesMIDI in DIN
MIDI out DIN
MIDI thru DIN
LTC in via 3 pin XLR
LTC out via phono connector
Triggering of MagicQ features via MIDI notes
Triggering of MagicQ Cues / Cue Stacks via MIDI Show Control
Power status LED
Connection status LED
SpecificationPowered from USBWidth: 130mm
Depth: 81mm
Height: 48mm
Weight: 0.25kg
Product
Codes0300-0005 MagicQ USB MIDI and Timecode Interface
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Type: | MIDI Interface |
| Inputs/Outputs: | USB Interface | Additional Inputs/Outputs: | USB Interface |
This is a very pampered Chamsys MIDI / SMPTE interface for use on PC-based MagicQ DMX consoles. If you're looking for the ability to unlock your MagicQ PC software for additional features normally 'locked out' by the lack of a wing or DMX interface, this unit will do the trick. These units sell for approximately $1100 new and are hard to find at this price. Thanks for checking out our listing! Here are some of the main features of the unit: Multipurpose MIDI and LTC Timecode Interface MIDI notes and MIDI show control
MIDI Timecode, EBU25, SMPTE30, NTSC30, Film 24Connects via USB to MagicQ PC/Mac or MagicQ consoles to provide support for MIDI in, MIDI out, LTC in, LTC out.All the common timecode protocols including EBU25, SMPTE30, NTSC30, Film 24. MIDI input can be used to trigger playbacks and other features via MIDI notes. MagicQ can be programmed to trigger specific playbacks/cues/macros from specific MIDI notes*.The Interface supports standard MIDI Show Control for triggering Cues and Cue Stacks. This enables MagicQ to be used together with other consoles/software and systems that support the MIDI Show Control protocol.MIDI Notes commands can be output from each Cue in Cue Stacks using simple MIDI strings.MagicQ Pro2014 console's have a built in MIDI/Timecode module as standard with MIDI in, MIDI out, LTC in and LTC out..MagicQ MIDI/Timecode Interface comes with a USB cable and instruction sheet.For security reasons MagicQ limits the number of playbacks that can be controlled using MIDI and the remote protocols. On MagicQ consoles PB1 to PB34 can be controlled. On MagicQ PC, playbacks PB1 to PB10 can be controlled.
FeaturesMIDI in DIN
MIDI out DIN
MIDI thru DIN
LTC in via 3 pin XLR
LTC out via phono connector
Triggering of MagicQ features via MIDI notes
Triggering of MagicQ Cues / Cue Stacks via MIDI Show Control
Power status LED
Connection status LED
SpecificationPowered from USBWidth: 130mm
Depth: 81mm
Height: 48mm
Weight: 0.25kg
Product
Codes0300-0005 MagicQ USB MIDI and Timecode Interface
MIDI Timecode, EBU25, SMPTE30, NTSC30, Film 24Connects via USB to MagicQ PC/Mac or MagicQ consoles to provide support for MIDI in, MIDI out, LTC in, LTC out.All the common timecode protocols including EBU25, SMPTE30, NTSC30, Film 24. MIDI input can be used to trigger playbacks and other features via MIDI notes. MagicQ can be programmed to trigger specific playbacks/cues/macros from specific MIDI notes*.The Interface supports standard MIDI Show Control for triggering Cues and Cue Stacks. This enables MagicQ to be used together with other consoles/software and systems that support the MIDI Show Control protocol.MIDI Notes commands can be output from each Cue in Cue Stacks using simple MIDI strings.MagicQ Pro2014 console's have a built in MIDI/Timecode module as standard with MIDI in, MIDI out, LTC in and LTC out..MagicQ MIDI/Timecode Interface comes with a USB cable and instruction sheet.For security reasons MagicQ limits the number of playbacks that can be controlled using MIDI and the remote protocols. On MagicQ consoles PB1 to PB34 can be controlled. On MagicQ PC, playbacks PB1 to PB10 can be controlled.
FeaturesMIDI in DIN
MIDI out DIN
MIDI thru DIN
LTC in via 3 pin XLR
LTC out via phono connector
Triggering of MagicQ features via MIDI notes
Triggering of MagicQ Cues / Cue Stacks via MIDI Show Control
Power status LED
Connection status LED
SpecificationPowered from USBWidth: 130mm
Depth: 81mm
Height: 48mm
Weight: 0.25kg
Product
Codes0300-0005 MagicQ USB MIDI and Timecode Interface