Back to the main page Back to category Signal Processors or Rack Effect
musical instrument details
Vintage Altec Lansing Model 1568a Tube Power Amplifier Rackmount Unit
Estimated price for orientation: 515 $
Category: Signal Processors or Rack Effect
Class:
Description Type: Power Amplifier MPN: Does Not Apply Brand: Altec Lansing Form Factor: Rack-Mountable Model: 1568a UPC: Does not apply
Vintage Altec Lansing Model 1568a Tube Power Amplifier Rackmount UnitFor parts / repair cut power cords a lot of really keen valuable components line transformer, old GE tubes, and a Peerless Transformers.The 1568a is a rack mounted, AC operated power amplifier intended for use in sound reinforcing, paging, music distribution, or any application requiring low distortion, wide frequency range, complete stability with any type of load, reliability of operation, ease of servicing or low cost.SPECIFICATIONS Power Amplifier
65 db
0.9 volt
40 watts at less than 2% thd 40 to 20,000 cps ±1 db, 5-30,000 cps; ±4 db, 1-100,000 cps 70,000 ohm potentiometer 150 or 600 ohms with 15095 Plug-in Transformer
4 (12.6 v), 8 (18 v), 16 (25 v), 124 (70 v) ohms ungrounded Less than 15% of nominal load impedance
80 db below rated output
Volume control, continuously variable, composition
117 vac, 50/60 cycles, 125 watts
117 volt ac receptacle on chassis
2-6CG7, 2-6CA7/EL34, 1-5U4GB
8 3/4" high, 19" wide, 7 3/4 deep
Dark green
22 lbs.
Two stage high-pass-filter for protection of horn loaded drivers 15095 Plug-in Transformer Item will be professionally packed, shipped and insured to guarantee safe arrival The item pictured is the one you will be receiving. No additional accessories included. **BUY WITH CONFIDENCE** **FREE SHIPPING WITHIN THE UNITED STATES** Tone House Studios has new Guitar and Recording Studio gear being added every week!! Be sure to check out our world-class recording facility located in Long Island, NY. All our Gear is tested before being shipped. Sometimes things happen beyond our control during shipping. If your product arrives not as described in our listing for any reason, please reach out to us directly so we can resolve this issue promptly. Many issues can be solved quickly and efficiently with quick correspondence. We take our customer satisfaction very seriously! Follow us on facebook to keep up with new offerings and news from the studio.
Description
| Type: | Power Amplifier | MPN: | Does Not Apply |
| Brand: | Altec Lansing | Form Factor: | Rack-Mountable |
| Model: | 1568a | UPC: | Does not apply |
Vintage Altec Lansing Model 1568a Tube Power Amplifier Rackmount UnitFor parts / repair cut power cords a lot of really keen valuable components line transformer, old GE tubes, and a Peerless Transformers.The 1568a is a rack mounted, AC operated power amplifier intended for use in sound reinforcing, paging, music distribution, or any application requiring low distortion, wide frequency range, complete stability with any type of load, reliability of operation, ease of servicing or low cost.SPECIFICATIONS
Power Amplifier
65 db
0.9 volt
40 watts at less than 2% thd 40 to 20,000 cps ±1 db, 5-30,000 cps; ±4 db, 1-100,000 cps 70,000 ohm potentiometer 150 or 600 ohms with 15095 Plug-in Transformer
4 (12.6 v), 8 (18 v), 16 (25 v), 124 (70 v) ohms ungrounded Less than 15% of nominal load impedance
80 db below rated output
Volume control, continuously variable, composition
117 vac, 50/60 cycles, 125 watts
117 volt ac receptacle on chassis
2-6CG7, 2-6CA7/EL34, 1-5U4GB
8 3/4" high, 19" wide, 7 3/4 deep
Dark green
22 lbs.
Two stage high-pass-filter for protection of horn loaded drivers 15095 Plug-in Transformer
65 db
0.9 volt
40 watts at less than 2% thd 40 to 20,000 cps ±1 db, 5-30,000 cps; ±4 db, 1-100,000 cps 70,000 ohm potentiometer 150 or 600 ohms with 15095 Plug-in Transformer
4 (12.6 v), 8 (18 v), 16 (25 v), 124 (70 v) ohms ungrounded Less than 15% of nominal load impedance
80 db below rated output
Volume control, continuously variable, composition
117 vac, 50/60 cycles, 125 watts
117 volt ac receptacle on chassis
2-6CG7, 2-6CA7/EL34, 1-5U4GB
8 3/4" high, 19" wide, 7 3/4 deep
Dark green
22 lbs.
Two stage high-pass-filter for protection of horn loaded drivers 15095 Plug-in Transformer
Item will be professionally packed, shipped and insured to guarantee safe arrival The item pictured is the one you will be receiving. No additional accessories included. **BUY WITH CONFIDENCE** **FREE SHIPPING WITHIN THE UNITED STATES** Tone House Studios has new Guitar and Recording Studio gear being added every week!! Be sure to check out our world-class recording facility located in Long Island, NY. All our Gear is tested before being shipped. Sometimes things happen beyond our control during shipping. If your product arrives not as described in our listing for any reason, please reach out to us directly so we can resolve this issue promptly. Many issues can be solved quickly and efficiently with quick correspondence. We take our customer satisfaction very seriously! Follow us on facebook to keep up with new offerings and news from the studio.