Back to the main page Back to category Preamps and Channel Strips
musical instrument details
Neve RL1-RN two Langley RL1 six mic preamplifiers EQs by AMEK in NEW 19" Case
Estimated price for orientation: 3 500 $
Category: Preamps and Channel Strips
Class:
Description Condition: Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition
Description:One NEW 19”/ 13RU high quality rackmount case fitted with two RL1-RH microphone preamplifiers/EQs designed by Rupert Neve and six RL1 microphone preamplifiers/EQs designed by Graham Langley manufactured by Amek.The modules are in superb physical condition and working order fully serviced prior the auction. Each module is fitted with high quality microphone and line preamplifier, very flexible, great sounding musical four band parametric EQ, High/Low pass filters and Direct Output.The rack is powered by one NEW 19”/2RU external power supply. The DC cable (8 feet long) is included. Technical Specifications: RL1-RN by Rupert NeveInputs:- The Rupert Neve mic amp is controlled by a high quality 12-position rotary switch with a range of 0-66dB, and a separate trim control with a range of +/- 6dB;- Phantom Power is sent to the Mic XLR connector when the 48V (+48V DC) switch is pressed; Equalization: - The EQ is designed by Rupert Neve and a greater degree of cut and boost (+/- 18dB)on each of the four bands, with a continuously variable Q on two mids;- LOW PASS filter continuously variable between 2kHz and 30kHz @ 12dB per octave;- HIGH PASS filter continuously variable between 25Hz and 500Hz @ 12dB per octave; - HF (high frequency): continuously variable between 2kHz and 20kHz, boost/cut +/-18dB, Bell/Shelf switch; - HMF (high mid frequency): continuously variable between 500Hz and 4.5kHz, boost/cut +/-18dB, continuously variable Q;- HMF (high mid frequency): continuously variable between 500Hz and 4.5kHz, boost/cut +/-18dB, continuously variable Q;- LMF (low mid frequency): continuously variable between 100Hz and 1kHz, boost/cut +/-18dB, continuously variable Q;- LF (low frequency): continuously variable between 30Hz and 300kHz, boost/cut +/-18dB, Bell/Shelf switch; - Separate in/out switches are provided for the filters and EQ section; Insert:- The insert point is post EQ, pre-fader and it has it’s own In/Out switch;- An internal switch allows the Insert to be positioned pre-EQ if required;- Phase Reverse switch directly follows the insert point; Direct Output:- The Direct Aux 12 switch inserts Aux Send 12 control into the Direct Output path to provide a variable output level. An internal jumper allows the Direct Output signal to be delivered Pre EQ if required. Meter:- Each channel has a 8 LED Pre-Fader Meter calibrated from -30 to +8dB with the top LED giving overload indication when the signal reaches approximately 6 dB below clipping. The overload LED has a fast attack and a slow decay time. The microphone and line inputs and the Direct Output are electronically balanced;The Insert Send is unbalanced;The Insert Return is electronically balanced; RL1 by Graham LangleyInputs:- The mic input has a variable gain from 10dB to 60dB;- The line input is variable from -15dB to +35dB;- 15dB pad is fitted;- Phantom Power is sent to the Mic XLR connector when the 48V (+48V DC) switch is pressed; Equalization:- The EQ is designed by Graham Langley;- <
Description
| Condition: | Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition |
Description:One NEW 19”/ 13RU high quality rackmount case fitted with two RL1-RH microphone preamplifiers/EQs designed by Rupert Neve and six RL1 microphone preamplifiers/EQs designed by Graham Langley manufactured by Amek.The modules are in superb physical condition and working order fully serviced prior the auction. Each module is fitted with high quality microphone and line preamplifier, very flexible, great sounding musical four band parametric EQ, High/Low pass filters and Direct Output.The rack is powered by one NEW 19”/2RU external power supply. The DC cable (8 feet long) is included. Technical Specifications: RL1-RN by Rupert NeveInputs:- The Rupert Neve mic amp is controlled by a high quality 12-position rotary switch with a range of 0-66dB, and a separate trim control with a range of +/- 6dB;- Phantom Power is sent to the Mic XLR connector when the 48V (+48V DC) switch is pressed; Equalization: - The EQ is designed by Rupert Neve and a greater degree of cut and boost (+/- 18dB)on each of the four bands, with a continuously variable Q on two mids;- LOW PASS filter continuously variable between 2kHz and 30kHz @ 12dB per octave;- HIGH PASS filter continuously variable between 25Hz and 500Hz @ 12dB per octave; - HF (high frequency): continuously variable between 2kHz and 20kHz, boost/cut +/-18dB, Bell/Shelf switch; - HMF (high mid frequency): continuously variable between 500Hz and 4.5kHz, boost/cut +/-18dB, continuously variable Q;- HMF (high mid frequency): continuously variable between 500Hz and 4.5kHz, boost/cut +/-18dB, continuously variable Q;- LMF (low mid frequency): continuously variable between 100Hz and 1kHz, boost/cut +/-18dB, continuously variable Q;- LF (low frequency): continuously variable between 30Hz and 300kHz, boost/cut +/-18dB, Bell/Shelf switch; - Separate in/out switches are provided for the filters and EQ section; Insert:- The insert point is post EQ, pre-fader and it has it’s own In/Out switch;- An internal switch allows the Insert to be positioned pre-EQ if required;- Phase Reverse switch directly follows the insert point; Direct Output:- The Direct Aux 12 switch inserts Aux Send 12 control into the Direct Output path to provide a variable output level. An internal jumper allows the Direct Output signal to be delivered Pre EQ if required. Meter:- Each channel has a 8 LED Pre-Fader Meter calibrated from -30 to +8dB with the top LED giving overload indication when the signal reaches approximately 6 dB below clipping. The overload LED has a fast attack and a slow decay time. The microphone and line inputs and the Direct Output are electronically balanced;The Insert Send is unbalanced;The Insert Return is electronically balanced; RL1 by Graham LangleyInputs:- The mic input has a variable gain from 10dB to 60dB;- The line input is variable from -15dB to +35dB;- 15dB pad is fitted;- Phantom Power is sent to the Mic XLR connector when the 48V (+48V DC) switch is pressed; Equalization:- The EQ is designed by Graham Langley;- <