Back to the main page Back to category Preamps and Channel Strips
musical instrument details
Joemeek TwinQ Digital Audio Interface LIKE A NEW!
Estimated price for orientation: 598 $
Category: Preamps and Channel Strips
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Marke: Joemeek Modell: TwinQ
twinQ Specifications Input impedances: Mic: 1.2kohm; Line: 20kohm Pre-amp overall gain: 0dB to 60dB Common mode rejection: 70dB Equivalent input noise: -128.5dBu (unweighted) Distortion:
0.001% (below Compressor threshold) Frequency response: 10Hz to 70kHz (-3dB) Maximum input before clipping: Mic: +21dBu; Line: +45dBu Headroom before clipping: +21dBu Compressor threshold: ∞dBu to -20dBu (variable) Compressor ratio: 1:1 to 10:1 (variable) Compressor attack time: 1 msec to 100 msec (adaptive) Compressor release time: 0.1 sec to 3 sec (adaptive) Nominal output levels: +4dBu/-10dBv Output impedance: 75ohm Output Level switch: 12dB attenuation Noise Floor: -85dBu (typical, with ~40dB mic gain) VU Meter: Analogue movement Power supply: 115V / 230V ac mains, 50/60Hz Power consumption: 30W Mechanical: 482W x 88H x 220D (overall) Weight: 3 kilos High Pass Filter: 12dB per octave cut below 80Hz EQ Boost & Cut: +/-15dB (zero phase-shift bell response) LF Frequency : 40Hz to 650Hz variable MID Frequency : 300Hz to 5kHz variable HF Frequency : 6kHz/12kHz switchable
Digital Output Specifications Sampling: 24 Bit
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Marke: | Joemeek |
| Modell: | TwinQ |
twinQ Specifications
Digital Output Specifications
| Input impedances: | Mic: 1.2kohm; Line: 20kohm |
| Pre-amp overall gain: | 0dB to 60dB |
| Common mode rejection: | 70dB |
| Equivalent input noise: | -128.5dBu (unweighted) |
| Distortion: | 0.001% (below Compressor threshold) |
| Frequency response: | 10Hz to 70kHz (-3dB) |
| Maximum input before clipping: | Mic: +21dBu; Line: +45dBu |
| Headroom before clipping: | +21dBu |
| Compressor threshold: | ∞dBu to -20dBu (variable) |
| Compressor ratio: | 1:1 to 10:1 (variable) |
| Compressor attack time: | 1 msec to 100 msec (adaptive) |
| Compressor release time: | 0.1 sec to 3 sec (adaptive) |
| Nominal output levels: | +4dBu/-10dBv |
| Output impedance: | 75ohm |
| Output Level switch: | 12dB attenuation |
| Noise Floor: | -85dBu (typical, with ~40dB mic gain) |
| VU Meter: | Analogue movement |
| Power supply: | 115V / 230V ac mains, 50/60Hz |
| Power consumption: | 30W |
| Mechanical: | 482W x 88H x 220D (overall) |
| Weight: | 3 kilos |
| High Pass Filter: | 12dB per octave cut below 80Hz |
| EQ Boost & Cut: | +/-15dB (zero phase-shift bell response) |
| LF Frequency : | 40Hz to 650Hz variable |
| MID Frequency : | 300Hz to 5kHz variable |
| HF Frequency : | 6kHz/12kHz switchable |
Digital Output Specifications
| Sampling: | 24 Bit |