Back to the main page Back to category Live and Studio Mixers
musical instrument details
Brand New Alto RMX2408 DFX 2000W Powered Mixer with FX
Estimated price for orientation: 599 $
Category: Live and Studio Mixers
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Alto Professional Suited For: Recording & Live Sound, Stage/Live Sound
OVERVIEW
Light, rugged and powerful.
The Alto RMX2408DFX is a 2000 watt powered mixer with EQ and effects. It features 2000 watts of Class D power. Class D amplification makes the RMX2408DFX not only powerful but also incredibly light compared to other solutions.The RMX2408DFX also features a useful array of tools including 8 XLR jacks with phantom power, 8 Line jacks and stereo RCA. This means that whether you're plugging in guitars, mics, keyboards or even an iPod for playback between sets, you're covered with the RMX2408DFX .Once everything is connected, there's a full on-board digital effects processor and 3-shelf EQ on each mono and stereo channel so you can dial in the perfect sound at any venue. A 24-bit, built-in Alesis DSP effects engine supplies ample options for sweetening including Hall, Room, Vocal & Plate reverbs, Mono & Stereo delay (max delay time 650ms), Chorus, Flanger & Reverb modulations, Reverb+Delay, Reverb+Chorus and Reverb+Flanger combinations. 256 different Alesis DSP presets provide ample options for any situation. When the gig is done, inset, molded handles on both ends make it super easy to transport.
FEATURES
Lightweight and ruggedly built
18 total inputs
8 XLR jacks with phantom power
On-board digital effects processor
3-shelf EQ on each mono and stereo channel
Order today and get your mixing, processing and power in a single box.
SPECIFICATIONS
RMX2408 DFX 2000W Powered Mixer with FX
Microphone input: Electronically balanced, discrete input configuration
Frequency response: 10Hz to 55kHz, +/--3dB
Distortion: (THD & N) 0.006% at +4dBu, 1kHz
Gain: 50dB (MIC)
SNR: (Signal to Noise Ratio) >90dB
Line input
Electronically balanced
Frequency response: 10Hz to 55kHz, +/--3dB
Distortion: (THD & N) 0.04% at +4dBu, 1kHz
Gain: 30dB
Stereo input channels
Line input: Unbalanced
Frequency response: 10Hz to 55kHz, +/--3dB
Distortion: (THD & N) 0.006% at +4dBu, 1kHz
Impedances
Microphone input: 1.4kOhm
Channel Insert return: 2.5kOhm
All other inputs: 10kOhm or greater
Tape out: 1kOhm
All other output: 120Ohm
Equalization
Hi shelving: +/--15dB @12kHz
Mid bell: +/--15dB @2.5kHz
Low shelving: +/--15dB @ 80Hz
Alesis DSP Section
A/D and D/A converters: 24-bit
DSP resolution: 24-bit
Type of effects
Hall, Room, Vocal & Plate Reverb
Mono & Stereo DELAY (max delay time 650ms)
Chorus, Flanger & Reverb Modulations
Reverb+Delay, Reverb+Chorus,
Reverb+Flanger combinations
Presets: 256
Controls
16-position PRESET Selector; 16-position VARIATION selector
CLIP LED; MUTE SWITCH with LED indicator
Main Mix Section
Noise: (Bus Noise) Fader 0 dB, channels muted:--85dBr (ref.:+4dBu)
Fader: 0dB, all input channels assigned and set to
UNITY gain:--71dBr (ref.:+4dBu)
Max output: +27dBu balanced, +22dBu unbalanced, 1/4" jacks
AUX Sends max out: +22dBu
Output power
500Wx2+500Wx2 mode 480Wx4(EIAJ) @ 4ohm,
224Wx4(EIAJ) @ 8ohm
1000Wx1+1000Wx1 mode976Wx2(EIAJ) @ 8ohm
500Wx1(R)+500Wx1(L)+1000W(MONO) mode521Wx2(EIAJ) @ 4ohm+937Wx1(EIAJ) @8 ohm
Bridge mode1553W @ 8 ohm
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Alto Professional |
| Suited For: | Recording & Live Sound, Stage/Live Sound |
OVERVIEW
Light, rugged and powerful.
The Alto RMX2408DFX is a 2000 watt powered mixer with EQ and effects. It features 2000 watts of Class D power. Class D amplification makes the RMX2408DFX not only powerful but also incredibly light compared to other solutions.The RMX2408DFX also features a useful array of tools including 8 XLR jacks with phantom power, 8 Line jacks and stereo RCA. This means that whether you're plugging in guitars, mics, keyboards or even an iPod for playback between sets, you're covered with the RMX2408DFX .Once everything is connected, there's a full on-board digital effects processor and 3-shelf EQ on each mono and stereo channel so you can dial in the perfect sound at any venue. A 24-bit, built-in Alesis DSP effects engine supplies ample options for sweetening including Hall, Room, Vocal & Plate reverbs, Mono & Stereo delay (max delay time 650ms), Chorus, Flanger & Reverb modulations, Reverb+Delay, Reverb+Chorus and Reverb+Flanger combinations. 256 different Alesis DSP presets provide ample options for any situation. When the gig is done, inset, molded handles on both ends make it super easy to transport.
FEATURES
Lightweight and ruggedly built
18 total inputs
8 XLR jacks with phantom power
On-board digital effects processor
3-shelf EQ on each mono and stereo channel
Order today and get your mixing, processing and power in a single box.
SPECIFICATIONS
RMX2408 DFX 2000W Powered Mixer with FX
Microphone input: Electronically balanced, discrete input configuration
Frequency response: 10Hz to 55kHz, +/--3dB
Distortion: (THD & N) 0.006% at +4dBu, 1kHz
Gain: 50dB (MIC)
SNR: (Signal to Noise Ratio) >90dB
Line input
Electronically balanced
Frequency response: 10Hz to 55kHz, +/--3dB
Distortion: (THD & N) 0.04% at +4dBu, 1kHz
Gain: 30dB
Stereo input channels
Line input: Unbalanced
Frequency response: 10Hz to 55kHz, +/--3dB
Distortion: (THD & N) 0.006% at +4dBu, 1kHz
Impedances
Microphone input: 1.4kOhm
Channel Insert return: 2.5kOhm
All other inputs: 10kOhm or greater
Tape out: 1kOhm
All other output: 120Ohm
Equalization
Hi shelving: +/--15dB @12kHz
Mid bell: +/--15dB @2.5kHz
Low shelving: +/--15dB @ 80Hz
Alesis DSP Section
A/D and D/A converters: 24-bit
DSP resolution: 24-bit
Type of effects
Hall, Room, Vocal & Plate Reverb
Mono & Stereo DELAY (max delay time 650ms)
Chorus, Flanger & Reverb Modulations
Reverb+Delay, Reverb+Chorus,
Reverb+Flanger combinations
Presets: 256
Controls
16-position PRESET Selector; 16-position VARIATION selector
CLIP LED; MUTE SWITCH with LED indicator
Main Mix Section
Noise: (Bus Noise) Fader 0 dB, channels muted:--85dBr (ref.:+4dBu)
Fader: 0dB, all input channels assigned and set to
UNITY gain:--71dBr (ref.:+4dBu)
Max output: +27dBu balanced, +22dBu unbalanced, 1/4" jacks
AUX Sends max out: +22dBu
Output power
500Wx2+500Wx2 mode 480Wx4(EIAJ) @ 4ohm,
224Wx4(EIAJ) @ 8ohm
1000Wx1+1000Wx1 mode976Wx2(EIAJ) @ 8ohm
500Wx1(R)+500Wx1(L)+1000W(MONO) mode521Wx2(EIAJ) @ 4ohm+937Wx1(EIAJ) @8 ohm
Bridge mode1553W @ 8 ohm
Light, rugged and powerful.
The Alto RMX2408DFX is a 2000 watt powered mixer with EQ and effects. It features 2000 watts of Class D power. Class D amplification makes the RMX2408DFX not only powerful but also incredibly light compared to other solutions.The RMX2408DFX also features a useful array of tools including 8 XLR jacks with phantom power, 8 Line jacks and stereo RCA. This means that whether you're plugging in guitars, mics, keyboards or even an iPod for playback between sets, you're covered with the RMX2408DFX .Once everything is connected, there's a full on-board digital effects processor and 3-shelf EQ on each mono and stereo channel so you can dial in the perfect sound at any venue. A 24-bit, built-in Alesis DSP effects engine supplies ample options for sweetening including Hall, Room, Vocal & Plate reverbs, Mono & Stereo delay (max delay time 650ms), Chorus, Flanger & Reverb modulations, Reverb+Delay, Reverb+Chorus and Reverb+Flanger combinations. 256 different Alesis DSP presets provide ample options for any situation. When the gig is done, inset, molded handles on both ends make it super easy to transport.
FEATURES
Lightweight and ruggedly built
18 total inputs
8 XLR jacks with phantom power
On-board digital effects processor
3-shelf EQ on each mono and stereo channel
Order today and get your mixing, processing and power in a single box.
SPECIFICATIONS
RMX2408 DFX 2000W Powered Mixer with FX
Microphone input: Electronically balanced, discrete input configuration
Frequency response: 10Hz to 55kHz, +/--3dB
Distortion: (THD & N) 0.006% at +4dBu, 1kHz
Gain: 50dB (MIC)
SNR: (Signal to Noise Ratio) >90dB
Line input
Electronically balanced
Frequency response: 10Hz to 55kHz, +/--3dB
Distortion: (THD & N) 0.04% at +4dBu, 1kHz
Gain: 30dB
Stereo input channels
Line input: Unbalanced
Frequency response: 10Hz to 55kHz, +/--3dB
Distortion: (THD & N) 0.006% at +4dBu, 1kHz
Impedances
Microphone input: 1.4kOhm
Channel Insert return: 2.5kOhm
All other inputs: 10kOhm or greater
Tape out: 1kOhm
All other output: 120Ohm
Equalization
Hi shelving: +/--15dB @12kHz
Mid bell: +/--15dB @2.5kHz
Low shelving: +/--15dB @ 80Hz
Alesis DSP Section
A/D and D/A converters: 24-bit
DSP resolution: 24-bit
Type of effects
Hall, Room, Vocal & Plate Reverb
Mono & Stereo DELAY (max delay time 650ms)
Chorus, Flanger & Reverb Modulations
Reverb+Delay, Reverb+Chorus,
Reverb+Flanger combinations
Presets: 256
Controls
16-position PRESET Selector; 16-position VARIATION selector
CLIP LED; MUTE SWITCH with LED indicator
Main Mix Section
Noise: (Bus Noise) Fader 0 dB, channels muted:--85dBr (ref.:+4dBu)
Fader: 0dB, all input channels assigned and set to
UNITY gain:--71dBr (ref.:+4dBu)
Max output: +27dBu balanced, +22dBu unbalanced, 1/4" jacks
AUX Sends max out: +22dBu
Output power
500Wx2+500Wx2 mode 480Wx4(EIAJ) @ 4ohm,
224Wx4(EIAJ) @ 8ohm
1000Wx1+1000Wx1 mode976Wx2(EIAJ) @ 8ohm
500Wx1(R)+500Wx1(L)+1000W(MONO) mode521Wx2(EIAJ) @ 4ohm+937Wx1(EIAJ) @8 ohm
Bridge mode1553W @ 8 ohm