Back to the main page Back to category Shure Qlxd14 83 Lavalier Wireles
musical instrument details
Shure QLXD14/83-H50 Digital Wireless Mic System with WL183 Lav Mic 534-598MHz
Estimated price for orientation: 1 179 $
Category: Shure Qlxd14 83 Lavalier Wireles
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: N/A MPN: Does Not Apply UPC: 042406350389
Shure QLXD14/83-H50 Digital Wireless Mic System with WL183 Lav Mic 534-598MHzBrand NEWRF Carrier Frequency Range H50: 534 to 598 MHz Working Range 330' (100 m)
Note: Actual range depends on RF signal absorption, reflection and interference RF Tuning Step Size: 25 kHz, varies by region Image Rejection Greater than 70 dB, typical RF Sensitivity -97 dBm at 10-5 BER Latency Less than 2.9 ms Audio Frequency Response QLXD1: 20 Hz - 20 kHz (±1 dB) Audio Dynamic Range System Gain @ +10: Greater than 120 dB, A-weighted, typical Total Harmonic Distortion (THD) -12 dBFS Input, System Gain @ +10: Less than 0.1% Polarity System Audio: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 1/4" (6.35 mm) output Operating Temperature Range 0 to 122°F (-18 to 50°C)
Note: Battery characteristics may limit this range Storage Temperature Range -20 to 165°F (-29 to 74°C)
Note: Battery characteristics may limit this range.
Housing Steel Power Requirement 12 VDC @ 0.4 A, supplied by external power supply (tip positive) RF Input Spurious Rejection: Greater than 80 dB, typical
Connector Type: BNC
Impedance: 50 ohms Audio Output Gain Adjustment Range: -18 to +42 dB in 1 dB steps
Configuration: 1/4" (6.35 mm), Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground)
XLR: Balanced (1=ground, 2=audio +, 3=audio -)
Impedance 1/4" (6.35 mm), 100 ohms (50 ohms Unbalanced)
XLR: 100 ohms
Full Scale Output: 1/4" (6.35 mm), +12 dBV
XLR: LINE setting= +18 dBV, MIC setting= -12 dBV Mic/Line Switch: 30 dB pad
Phantom Power Protection: 1/4" (6.35 mm), Yes
XLR: Yes Networking Network Interface: Single Port Ethernet 10/100 Mbps
Network Addressing Capability: DHCP or Manual IP address
Maximum Ethernet Cable Length: 328' (100 m) Dimensions (H x W x D) 1.63 x 7.75 x 5.94" (41 x 197 x 151 mm) Weight 1.71 lb (777 g)
Housing Cast aluminum Mic Offset Range 0 to 21 dB (in 3 dB steps) Battery Type Shure SB900 rechargeable Li-Ion or AA batteries 1.5 V Battery Runtime At 10 mW:
Shure SB900: up to 10 hours
Alkaline: up to 9 hours Audio Input Connector: 4-pin male mini connector (TA4M)
Configuration: Unbalanced
Impedance: 1 MOhm
Maximum Input Level 1 kHz at 1% THD: 8.5 dBV (7.5 Vpp)
Preamplifier Equivalent Input Noise (EIN) System Gain Setting ≥ +20: -120 dBV, A-weighted, typical RF Output Connector: SMA
Antenna Type: 1/4 wave
Impedance: 50 Ω
Occupied Bandwidth: Less than 200 kHz
Modulation Type: Shure proprietary digital
Power: 1 mW or 10 mW
Varies by region Dimensions (H x W x D) 3.38 x 2.57 x 0.92" (86 x 65 x 23 mm) Weight 4.9 oz (138 g), without batteries
Model WL183 with TA4F connector
Package Weight 8.9 lb Box Dimensions (LxWxH) 19.4 x 17.4 x 3.8"
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | N/A |
| MPN: | Does Not Apply | UPC: | 042406350389 |
Shure QLXD14/83-H50 Digital Wireless Mic System with WL183 Lav Mic 534-598MHzBrand NEW
| RF Carrier Frequency Range | H50: 534 to 598 MHz |
| Working Range | 330' (100 m) Note: Actual range depends on RF signal absorption, reflection and interference |
| RF | Tuning Step Size: 25 kHz, varies by region |
| Image Rejection | Greater than 70 dB, typical |
| RF Sensitivity | -97 dBm at 10-5 BER |
| Latency | Less than 2.9 ms |
| Audio Frequency Response | QLXD1: 20 Hz - 20 kHz (±1 dB) |
| Audio Dynamic Range | System Gain @ +10: Greater than 120 dB, A-weighted, typical |
| Total Harmonic Distortion (THD) | -12 dBFS Input, System Gain @ +10: Less than 0.1% |
| Polarity | System Audio: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 1/4" (6.35 mm) output |
| Operating Temperature Range | 0 to 122°F (-18 to 50°C) Note: Battery characteristics may limit this range |
| Storage Temperature Range | -20 to 165°F (-29 to 74°C) Note: Battery characteristics may limit this range. |
| Housing | Steel |
| Power Requirement | 12 VDC @ 0.4 A, supplied by external power supply (tip positive) |
| RF Input | Spurious Rejection: Greater than 80 dB, typical Connector Type: BNC Impedance: 50 ohms |
| Audio Output | Gain Adjustment Range: -18 to +42 dB in 1 dB steps Configuration: 1/4" (6.35 mm), Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Balanced (1=ground, 2=audio +, 3=audio -) Impedance 1/4" (6.35 mm), 100 ohms (50 ohms Unbalanced) XLR: 100 ohms Full Scale Output: 1/4" (6.35 mm), +12 dBV XLR: LINE setting= +18 dBV, MIC setting= -12 dBV Mic/Line Switch: 30 dB pad Phantom Power Protection: 1/4" (6.35 mm), Yes XLR: Yes |
| Networking | Network Interface: Single Port Ethernet 10/100 Mbps Network Addressing Capability: DHCP or Manual IP address Maximum Ethernet Cable Length: 328' (100 m) |
| Dimensions (H x W x D) | 1.63 x 7.75 x 5.94" (41 x 197 x 151 mm) |
| Weight | 1.71 lb (777 g) |
| Housing | Cast aluminum |
| Mic Offset Range | 0 to 21 dB (in 3 dB steps) |
| Battery Type | Shure SB900 rechargeable Li-Ion or AA batteries 1.5 V |
| Battery Runtime | At 10 mW: Shure SB900: up to 10 hours Alkaline: up to 9 hours |
| Audio Input | Connector: 4-pin male mini connector (TA4M) Configuration: Unbalanced Impedance: 1 MOhm Maximum Input Level 1 kHz at 1% THD: 8.5 dBV (7.5 Vpp) Preamplifier Equivalent Input Noise (EIN) System Gain Setting ≥ +20: -120 dBV, A-weighted, typical |
| RF Output | Connector: SMA Antenna Type: 1/4 wave Impedance: 50 Ω Occupied Bandwidth: Less than 200 kHz Modulation Type: Shure proprietary digital Power: 1 mW or 10 mW Varies by region |
| Dimensions (H x W x D) | 3.38 x 2.57 x 0.92" (86 x 65 x 23 mm) |
| Weight | 4.9 oz (138 g), without batteries |
| Model | WL183 with TA4F connector |
| Package Weight | 8.9 lb |
| Box Dimensions (LxWxH) | 19.4 x 17.4 x 3.8" |