Back to the main page Back to category Audio or MIDI Interfaces
musical instrument details
UA Apollo Twin Duo Thunderbolt-NEW - UNOPENED - $120 OFF!!! - DON'T MISS OUT!!!
Estimated price for orientation: 600 $
Category: Audio or MIDI Interfaces
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Universal Audio
UNOPENED BRAND NEW UNIVERSAL AUDIO TWIN DUO THUNDERBOLT AUDIO INTERFACE!!!$120 OFF SAM ASH/ZZOUNDS/ PRICE!!!INCLUDES REALTIME ANALOG CLASSICS PLUG-IN BUNDLE ($399 VALUE)!!!
Universal Audio Apollo Twin Duo Specifications:All audio specifications are typical performance unless otherwise noted, tested under the following conditions: 48 kHz internal sample rate, 24-bit sample depth, 20 kHz measurement bandwidth, with balanced inputs and outputs.SystemI/O ComplementMicrophone Inputs TwoAnalog Line Inputs TwoHi-Z Instrument Inputs OneAnalog Line Outputs Two (independent mix buses)Analog Monitor Outputs Two (one stereo pair, independent L/R mix buses)Headphone Outputs One stereo pair (independent L/R mix buses)Digital Input Port (TOSLINK optical) One (ADAT or S/PDIF, selectable)Thunderbolt Port One (Thunderbolt 2 compatible)A/D – D/A ConversionSupported Sample Rates (kHz) 44.1, 48, 88.2, 96, 176.4, 192Bit Depth Per Sample 24Simultaneous A/D conversion Two channelsSimultaneous D/A conversion Six channelsAnalog Round-Trip Latency 1.1 milliseconds @ 96 kHz sample rateAnalog Round-Trip Latency with up to four serial UAD Powered Plug-Ins via Console application 1.1 milliseconds @ 96 kHz sample rateAnalog I/OLine Inputs 1 & 2Jack Type (combo mic/line balanced inputs) Female ¼” TRS BalancedDynamic Range (A–weighting) 117.5 dBSignal-to-Noise Ratio (A–weighting) 117.5 dBTotal Harmonic Distortion + Noise –108 dBFSCommon-Mode Rejection Ratio (CMRR) Greater than 60 dB (10’ cable)Frequency Response 20 Hz – 20 kHz, ±0.1 dBInput Impedance 10K OhmsGain Range +10 dB to +65 dBMaximum Input Level (@ Minimum Gain)18 dBVMaximum Input Level (@ Maximum Gain) –37 dBVStereo Level Balance ±0.05 dBMicrophone Inputs 1 & 2Jack Type (combo mic/line balanced inputs) Female XLR Balanced (pin 2 positive)Phantom Power (switchable per input) +48VDynamic Range (A–weighting) 118 dBSignal-to-Noise Ratio (A–weighting) 118 dBTotal Harmonic Distortion + Noise –110 dBFSEquivalent Input Noise –127 dBFrequency Response 20 Hz – 20 kHz, ±0.1 dBCommon-Mode Rejection Ratio (CMRR) Greater than 70 dB (10’ cable)Default Input Impedance 5.4K Ohms (variable via Unison preamp model)Gain Range +10 dB to +65 dBPad Attenuation (switchable per input) 20 dB (variable via Unison preamp model)Maximum Input Level (@ Minimum Gain, with Pad) 23.8 dBVMaximum Input Level (@ Maximum Gain, with Pad) –31.2 dBVHi-Z InputJack Type Female ¼” TS UnbalancedDynamic Range (A–weighting) 117 dBSignal-to-Noise Ratio (A–weighting) 117 dBTotal Harmonic Distortion + Noise –101 dBFSFrequency Response 20 Hz – 20 kHz, ±0.1 dBInput Impedance 1M OhmsMaximum Input Level (@ Minimum Gain) 10 dBVMaximum Input Level (@ Maximum Gain) –45 dBVLine Outputs 3 & 4Jack Type ¼” Female TRS BalancedDynamic Range (A–weighting) 118 dBSignal-to-Noise Ratio (A–weighting) 118 dBTotal Harmonic Distortion + Noise –107 dBFSFrequency Response 20 Hz – 20 kHz, ±0.1 dBStereo Level Balance ±0.05 dBChannel Separation Greater than 120 dBOutput Impedance 600 OhmsMaximum Output Level 18 dBVMonitor Outputs 1 & 2Jack Type ¼” Female TRS BalancedFrequency Response 20 Hz – 20 kHz, ±0.1 dBDynamic Range (A–weighting) 115 dBSignal-to-Noise Ratio (A–weighting) 115 dBTotal Harmonic Distortion + Noise –105 dBFSChannel Separation Greater than 118 dBStereo Level Balance ±0.05 dBOutput Impedance 600 OhmsOutput Gain Range –96 dB to 0 dBMaximum Output Level 18 dBVOperating Reference Level +14 dBu, +20 dBu (selectable)Stereo Headphones OutputJack Type ¼” Female TRS Stereo (unbalanced)Frequency Response 20 Hz – 20 kHz, ±0.1 dBDynamic Range (A–weighting) 113 dBSignal-to-Noise Ratio (A–weighting) 113 dBChannel Separation Greater than 110 dBTotal Harmonic Distortion + Noise –101 dBFSStereo Level Balance ±0.11 dBOutput Impedance 10 OhmsOutput Gain Range –INF to 0 dBMaximum Output Power 80 milliwatts into 600 OhmsDigital I/OS/PDIFConnector Type Optical TOSLINK JIS F05 (shared with ADAT)Format IEC958Supported Sample Rates (kHz) 44.1, 48, 88.2, 96S/PDIF Input Channels Two (Stereo L/R)ADATConnector Type Optical TOSLINK JIS F05 (shared with S/PDIF)Format ADAT Digital Lightpipe with S/MUXSupported Sample Rates (kHz) 44.1, 48, 88.2, 96, 172.4, 192ADAT Input Channels @ 44.1 kHz, 48 kHz 1 – 8ADAT Input Channels @ 88.2 kHz, 96 kHz 1 – 4 (S/MUX)ADAT Input Channels @ 176.4 kHz, 192 kHz 1 – 2 (S/MUX)Clock Synchronization SourcesInternal, S/PDIF, ADAT (digital clock sync source conditional per selected digital input type)ElectricalPower Supply External AC to DCAC Connector Type Changable blades (UL, VDE, UK, SSA, CCC)AC Requirements 100V – 240V AC, 50 – 60 HzDC Connector Type Male plug, 2.1 mm x 5.5 mm, center positiveDC Requirements 12 VDC, ±5%Maximum Power Consumption 12 WattsEnvironmentalOperating Temperature Range 32° to 95°º Farenheit (0° to 35° Celcius)Storage Temperature Range –40° to 176° Farenheit (–40 to 80° Celcius)Operating Humidity Range 20% to 80%MechanicalDimensionsWidth 6.31”Height 2.60”Depth, Chassis Only 5.86”Depth, Including Knob & Jack Protrusions 6.20”Shipping Box (Length x Width x Height) 8” x 8” x 5.5” (20.32cm x 20.32cm x 13.97cm)WeightShipping Weight (with box & accessories) 3.85 poundsWeight (bare unit) 2.35 poundsPackage ContentsApollo Twin Unit (SOLO or DUO)External Power Supply with (4) changeable AC connectors supporting USA, Europe, UK, Australia, China
UNOPENED RETURNS ACCEPTED ONLY!!!
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Universal Audio |
UNOPENED BRAND NEW UNIVERSAL AUDIO TWIN DUO THUNDERBOLT AUDIO INTERFACE!!!$120 OFF SAM ASH/ZZOUNDS/ PRICE!!!INCLUDES REALTIME ANALOG CLASSICS PLUG-IN BUNDLE ($399 VALUE)!!!
Universal Audio Apollo Twin Duo Specifications:All audio specifications are typical performance unless otherwise noted, tested under the following conditions: 48 kHz internal sample rate, 24-bit sample depth, 20 kHz measurement bandwidth, with balanced inputs and outputs.SystemI/O ComplementMicrophone Inputs TwoAnalog Line Inputs TwoHi-Z Instrument Inputs OneAnalog Line Outputs Two (independent mix buses)Analog Monitor Outputs Two (one stereo pair, independent L/R mix buses)Headphone Outputs One stereo pair (independent L/R mix buses)Digital Input Port (TOSLINK optical) One (ADAT or S/PDIF, selectable)Thunderbolt Port One (Thunderbolt 2 compatible)A/D – D/A ConversionSupported Sample Rates (kHz) 44.1, 48, 88.2, 96, 176.4, 192Bit Depth Per Sample 24Simultaneous A/D conversion Two channelsSimultaneous D/A conversion Six channelsAnalog Round-Trip Latency 1.1 milliseconds @ 96 kHz sample rateAnalog Round-Trip Latency with up to four serial UAD Powered Plug-Ins via Console application 1.1 milliseconds @ 96 kHz sample rateAnalog I/OLine Inputs 1 & 2Jack Type (combo mic/line balanced inputs) Female ¼” TRS BalancedDynamic Range (A–weighting) 117.5 dBSignal-to-Noise Ratio (A–weighting) 117.5 dBTotal Harmonic Distortion + Noise –108 dBFSCommon-Mode Rejection Ratio (CMRR) Greater than 60 dB (10’ cable)Frequency Response 20 Hz – 20 kHz, ±0.1 dBInput Impedance 10K OhmsGain Range +10 dB to +65 dBMaximum Input Level (@ Minimum Gain)18 dBVMaximum Input Level (@ Maximum Gain) –37 dBVStereo Level Balance ±0.05 dBMicrophone Inputs 1 & 2Jack Type (combo mic/line balanced inputs) Female XLR Balanced (pin 2 positive)Phantom Power (switchable per input) +48VDynamic Range (A–weighting) 118 dBSignal-to-Noise Ratio (A–weighting) 118 dBTotal Harmonic Distortion + Noise –110 dBFSEquivalent Input Noise –127 dBFrequency Response 20 Hz – 20 kHz, ±0.1 dBCommon-Mode Rejection Ratio (CMRR) Greater than 70 dB (10’ cable)Default Input Impedance 5.4K Ohms (variable via Unison preamp model)Gain Range +10 dB to +65 dBPad Attenuation (switchable per input) 20 dB (variable via Unison preamp model)Maximum Input Level (@ Minimum Gain, with Pad) 23.8 dBVMaximum Input Level (@ Maximum Gain, with Pad) –31.2 dBVHi-Z InputJack Type Female ¼” TS UnbalancedDynamic Range (A–weighting) 117 dBSignal-to-Noise Ratio (A–weighting) 117 dBTotal Harmonic Distortion + Noise –101 dBFSFrequency Response 20 Hz – 20 kHz, ±0.1 dBInput Impedance 1M OhmsMaximum Input Level (@ Minimum Gain) 10 dBVMaximum Input Level (@ Maximum Gain) –45 dBVLine Outputs 3 & 4Jack Type ¼” Female TRS BalancedDynamic Range (A–weighting) 118 dBSignal-to-Noise Ratio (A–weighting) 118 dBTotal Harmonic Distortion + Noise –107 dBFSFrequency Response 20 Hz – 20 kHz, ±0.1 dBStereo Level Balance ±0.05 dBChannel Separation Greater than 120 dBOutput Impedance 600 OhmsMaximum Output Level 18 dBVMonitor Outputs 1 & 2Jack Type ¼” Female TRS BalancedFrequency Response 20 Hz – 20 kHz, ±0.1 dBDynamic Range (A–weighting) 115 dBSignal-to-Noise Ratio (A–weighting) 115 dBTotal Harmonic Distortion + Noise –105 dBFSChannel Separation Greater than 118 dBStereo Level Balance ±0.05 dBOutput Impedance 600 OhmsOutput Gain Range –96 dB to 0 dBMaximum Output Level 18 dBVOperating Reference Level +14 dBu, +20 dBu (selectable)Stereo Headphones OutputJack Type ¼” Female TRS Stereo (unbalanced)Frequency Response 20 Hz – 20 kHz, ±0.1 dBDynamic Range (A–weighting) 113 dBSignal-to-Noise Ratio (A–weighting) 113 dBChannel Separation Greater than 110 dBTotal Harmonic Distortion + Noise –101 dBFSStereo Level Balance ±0.11 dBOutput Impedance 10 OhmsOutput Gain Range –INF to 0 dBMaximum Output Power 80 milliwatts into 600 OhmsDigital I/OS/PDIFConnector Type Optical TOSLINK JIS F05 (shared with ADAT)Format IEC958Supported Sample Rates (kHz) 44.1, 48, 88.2, 96S/PDIF Input Channels Two (Stereo L/R)ADATConnector Type Optical TOSLINK JIS F05 (shared with S/PDIF)Format ADAT Digital Lightpipe with S/MUXSupported Sample Rates (kHz) 44.1, 48, 88.2, 96, 172.4, 192ADAT Input Channels @ 44.1 kHz, 48 kHz 1 – 8ADAT Input Channels @ 88.2 kHz, 96 kHz 1 – 4 (S/MUX)ADAT Input Channels @ 176.4 kHz, 192 kHz 1 – 2 (S/MUX)Clock Synchronization SourcesInternal, S/PDIF, ADAT (digital clock sync source conditional per selected digital input type)ElectricalPower Supply External AC to DCAC Connector Type Changable blades (UL, VDE, UK, SSA, CCC)AC Requirements 100V – 240V AC, 50 – 60 HzDC Connector Type Male plug, 2.1 mm x 5.5 mm, center positiveDC Requirements 12 VDC, ±5%Maximum Power Consumption 12 WattsEnvironmentalOperating Temperature Range 32° to 95°º Farenheit (0° to 35° Celcius)Storage Temperature Range –40° to 176° Farenheit (–40 to 80° Celcius)Operating Humidity Range 20% to 80%MechanicalDimensionsWidth 6.31”Height 2.60”Depth, Chassis Only 5.86”Depth, Including Knob & Jack Protrusions 6.20”Shipping Box (Length x Width x Height) 8” x 8” x 5.5” (20.32cm x 20.32cm x 13.97cm)WeightShipping Weight (with box & accessories) 3.85 poundsWeight (bare unit) 2.35 poundsPackage ContentsApollo Twin Unit (SOLO or DUO)External Power Supply with (4) changeable AC connectors supporting USA, Europe, UK, Australia, China
UNOPENED RETURNS ACCEPTED ONLY!!!
Universal Audio Apollo Twin Duo Specifications:All audio specifications are typical performance unless otherwise noted, tested under the following conditions: 48 kHz internal sample rate, 24-bit sample depth, 20 kHz measurement bandwidth, with balanced inputs and outputs.SystemI/O ComplementMicrophone Inputs TwoAnalog Line Inputs TwoHi-Z Instrument Inputs OneAnalog Line Outputs Two (independent mix buses)Analog Monitor Outputs Two (one stereo pair, independent L/R mix buses)Headphone Outputs One stereo pair (independent L/R mix buses)Digital Input Port (TOSLINK optical) One (ADAT or S/PDIF, selectable)Thunderbolt Port One (Thunderbolt 2 compatible)A/D – D/A ConversionSupported Sample Rates (kHz) 44.1, 48, 88.2, 96, 176.4, 192Bit Depth Per Sample 24Simultaneous A/D conversion Two channelsSimultaneous D/A conversion Six channelsAnalog Round-Trip Latency 1.1 milliseconds @ 96 kHz sample rateAnalog Round-Trip Latency with up to four serial UAD Powered Plug-Ins via Console application 1.1 milliseconds @ 96 kHz sample rateAnalog I/OLine Inputs 1 & 2Jack Type (combo mic/line balanced inputs) Female ¼” TRS BalancedDynamic Range (A–weighting) 117.5 dBSignal-to-Noise Ratio (A–weighting) 117.5 dBTotal Harmonic Distortion + Noise –108 dBFSCommon-Mode Rejection Ratio (CMRR) Greater than 60 dB (10’ cable)Frequency Response 20 Hz – 20 kHz, ±0.1 dBInput Impedance 10K OhmsGain Range +10 dB to +65 dBMaximum Input Level (@ Minimum Gain)18 dBVMaximum Input Level (@ Maximum Gain) –37 dBVStereo Level Balance ±0.05 dBMicrophone Inputs 1 & 2Jack Type (combo mic/line balanced inputs) Female XLR Balanced (pin 2 positive)Phantom Power (switchable per input) +48VDynamic Range (A–weighting) 118 dBSignal-to-Noise Ratio (A–weighting) 118 dBTotal Harmonic Distortion + Noise –110 dBFSEquivalent Input Noise –127 dBFrequency Response 20 Hz – 20 kHz, ±0.1 dBCommon-Mode Rejection Ratio (CMRR) Greater than 70 dB (10’ cable)Default Input Impedance 5.4K Ohms (variable via Unison preamp model)Gain Range +10 dB to +65 dBPad Attenuation (switchable per input) 20 dB (variable via Unison preamp model)Maximum Input Level (@ Minimum Gain, with Pad) 23.8 dBVMaximum Input Level (@ Maximum Gain, with Pad) –31.2 dBVHi-Z InputJack Type Female ¼” TS UnbalancedDynamic Range (A–weighting) 117 dBSignal-to-Noise Ratio (A–weighting) 117 dBTotal Harmonic Distortion + Noise –101 dBFSFrequency Response 20 Hz – 20 kHz, ±0.1 dBInput Impedance 1M OhmsMaximum Input Level (@ Minimum Gain) 10 dBVMaximum Input Level (@ Maximum Gain) –45 dBVLine Outputs 3 & 4Jack Type ¼” Female TRS BalancedDynamic Range (A–weighting) 118 dBSignal-to-Noise Ratio (A–weighting) 118 dBTotal Harmonic Distortion + Noise –107 dBFSFrequency Response 20 Hz – 20 kHz, ±0.1 dBStereo Level Balance ±0.05 dBChannel Separation Greater than 120 dBOutput Impedance 600 OhmsMaximum Output Level 18 dBVMonitor Outputs 1 & 2Jack Type ¼” Female TRS BalancedFrequency Response 20 Hz – 20 kHz, ±0.1 dBDynamic Range (A–weighting) 115 dBSignal-to-Noise Ratio (A–weighting) 115 dBTotal Harmonic Distortion + Noise –105 dBFSChannel Separation Greater than 118 dBStereo Level Balance ±0.05 dBOutput Impedance 600 OhmsOutput Gain Range –96 dB to 0 dBMaximum Output Level 18 dBVOperating Reference Level +14 dBu, +20 dBu (selectable)Stereo Headphones OutputJack Type ¼” Female TRS Stereo (unbalanced)Frequency Response 20 Hz – 20 kHz, ±0.1 dBDynamic Range (A–weighting) 113 dBSignal-to-Noise Ratio (A–weighting) 113 dBChannel Separation Greater than 110 dBTotal Harmonic Distortion + Noise –101 dBFSStereo Level Balance ±0.11 dBOutput Impedance 10 OhmsOutput Gain Range –INF to 0 dBMaximum Output Power 80 milliwatts into 600 OhmsDigital I/OS/PDIFConnector Type Optical TOSLINK JIS F05 (shared with ADAT)Format IEC958Supported Sample Rates (kHz) 44.1, 48, 88.2, 96S/PDIF Input Channels Two (Stereo L/R)ADATConnector Type Optical TOSLINK JIS F05 (shared with S/PDIF)Format ADAT Digital Lightpipe with S/MUXSupported Sample Rates (kHz) 44.1, 48, 88.2, 96, 172.4, 192ADAT Input Channels @ 44.1 kHz, 48 kHz 1 – 8ADAT Input Channels @ 88.2 kHz, 96 kHz 1 – 4 (S/MUX)ADAT Input Channels @ 176.4 kHz, 192 kHz 1 – 2 (S/MUX)Clock Synchronization SourcesInternal, S/PDIF, ADAT (digital clock sync source conditional per selected digital input type)ElectricalPower Supply External AC to DCAC Connector Type Changable blades (UL, VDE, UK, SSA, CCC)AC Requirements 100V – 240V AC, 50 – 60 HzDC Connector Type Male plug, 2.1 mm x 5.5 mm, center positiveDC Requirements 12 VDC, ±5%Maximum Power Consumption 12 WattsEnvironmentalOperating Temperature Range 32° to 95°º Farenheit (0° to 35° Celcius)Storage Temperature Range –40° to 176° Farenheit (–40 to 80° Celcius)Operating Humidity Range 20% to 80%MechanicalDimensionsWidth 6.31”Height 2.60”Depth, Chassis Only 5.86”Depth, Including Knob & Jack Protrusions 6.20”Shipping Box (Length x Width x Height) 8” x 8” x 5.5” (20.32cm x 20.32cm x 13.97cm)WeightShipping Weight (with box & accessories) 3.85 poundsWeight (bare unit) 2.35 poundsPackage ContentsApollo Twin Unit (SOLO or DUO)External Power Supply with (4) changeable AC connectors supporting USA, Europe, UK, Australia, China
UNOPENED RETURNS ACCEPTED ONLY!!!