Back to the main page Back to category Audio or MIDI Interfaces
musical instrument details
DiGiGrid DLS and DLI 64-ch I/O DSP + Networked Audio for Pro Tools & Native DAWs
Estimated price for orientation: 2 199 $
Category: Audio or MIDI Interfaces
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: DiGiGrid Max. Number of Channels: 64 Model: DLS and DLI
BRAND NEW DigiGrid DLS and DLI Interfaces, purchased from top pro audio retailer (see picture with boxes), in SEALED, never opened boxes. Decided not to go with a Pro Tools interface, so I don't have a use for them - my loss is your gain!. Will consider selling each unit separately, but listing here at a discount for the two units.
These are amazing interfaces for adding DSP power (DLS only) to your rig AND for networking audio in your studio without the need for expensive cables. With the DiGiGrid DLS you'll get higher track and Waves/SoundGrid-compatible plug-in counts, more processing power, with lower latency than Pro Tools HDX. Imagine instantly upgrading your Waves Bundle to AAX-DSP - and you can do it with any DAW - non-HD Pro Tools, Logic, etc.Additional Info:The DiGiGrid DLS interface offers a comprehensive processing and networking hub for your Pro Tools system. Sporting two DigiLink ports that are capable of delivering up to 64 inputs and outputs, along with a built-in SoundGrid DSP server and a network switch, this interface hub is designed to give you more processing power by bridging Pro Tools systems with SoundGrid. It also provides a bridge from legacy TDM systems.The DiGiGrid DLI is the same unit without the SoundGrid DSP server. However, with a DLS in one room and a DLI in the other, you can send DSP power to any computer on the network.These units work in concert with the free SoundGrid Studio System software, which includes the SoundGrid Studio application, StudioRack, and the eMotion ST mixer. Used in combination with this software, the DLS -- with its built-in SoundGrid server -- gives you unequaled processing power. With full plugin integration inside your DAW, the DLS enables you to monitor and mix using up to hundreds of SoundGrid-compatible Waves and third-party plugins in real time, with the very low latency of only 0.8 milliseconds.DiGiGrid DLS operates in two modes -- I/O and SGP -- that offer different features based on your needs. In I/O mode, the DLS is designed to act as a bridge between Pro Tools systems and the DLS's built-in DSP server. In this mode the HD/HDX or HD Native system remains your playback engine, while the DLS appears as individual I/O units from which you can expand your studio by offloading your plugin processing to the built-in server and by connecting to additional SoundGrid I/Os. In SGP mode, the DLS enables you to control a variety of DigiLink enabled I/Os, bridge your favorite DAW (Logic, Cubase, Nuendo, Ableton, Pro Tools Native etc.) with SoundGrid applications and ASIO/Core Audio drivers, and offload your plugin processing to the built-in DSP server. In both modes, you can connect addtional SoundGrid-compatible components to your system with a single CAT5e/CAT6 Ethernet cable.Specs:Power Cord: 1 US, 1 EU, 1 UKEthernet Cable: CAT5e (2 meters)Registration CardDiGiGrid DLS features built-in SoundGrid DSP server and network switchDual DigiLink ports providing up to 64 inputs/outputsBridges Pro Tools HD/HDX and HD Native systems with SoundGridEnables convenient and seamelss use of a variety of DigiLink-compliant I/O devices with any native DAWCompliant with the SoundGrid ASIO/Core Audio driverCompatible with MultiRackConnects via a single Ethernet cable (CAT5e/CAT6)2 DigiLink ports; 64 channels in either SGP or I/O mode (32 channels per port). Compatible with the following DigiLink-enabled I/Os: Digi192, Digi96, HD Omni, HD I/O, Apogee Symphony I/O, Lynx Aurora 8, Lynx Aurora 16I/O Mode: DLS acts as an interface connected to HD Core, HD Accel, HDX, or HD Native cards; supports Pro Tools TDM 10.x and 11.xSGP Mode: DLS acts as a controller for DigiLink-enabled I/Os2 Operation Mode switches2 SoundGrid RJ45 Ethernet ports1 AC Input1 Word Clock/Loop Sync I/O1 USB Port2U Rackmount chassisSupported sample rates: 44.1, 48, 88.2, and 96 kHz (176.4 and 192 kHz will be supported in the future)Recovery switchClocking Options: Work Clock/Loop Sync, SoundGrid (Sync over Ethernet), or DigiLink
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | DiGiGrid |
| Max. Number of Channels: | 64 | Model: | DLS and DLI |
BRAND NEW DigiGrid DLS and DLI Interfaces, purchased from top pro audio retailer (see picture with boxes), in SEALED, never opened boxes. Decided not to go with a Pro Tools interface, so I don't have a use for them - my loss is your gain!. Will consider selling each unit separately, but listing here at a discount for the two units.
These are amazing interfaces for adding DSP power (DLS only) to your rig AND for networking audio in your studio without the need for expensive cables. With the DiGiGrid DLS you'll get higher track and Waves/SoundGrid-compatible plug-in counts, more processing power, with lower latency than Pro Tools HDX. Imagine instantly upgrading your Waves Bundle to AAX-DSP - and you can do it with any DAW - non-HD Pro Tools, Logic, etc.Additional Info:The DiGiGrid DLS interface offers a comprehensive processing and networking hub for your Pro Tools system. Sporting two DigiLink ports that are capable of delivering up to 64 inputs and outputs, along with a built-in SoundGrid DSP server and a network switch, this interface hub is designed to give you more processing power by bridging Pro Tools systems with SoundGrid. It also provides a bridge from legacy TDM systems.The DiGiGrid DLI is the same unit without the SoundGrid DSP server. However, with a DLS in one room and a DLI in the other, you can send DSP power to any computer on the network.These units work in concert with the free SoundGrid Studio System software, which includes the SoundGrid Studio application, StudioRack, and the eMotion ST mixer. Used in combination with this software, the DLS -- with its built-in SoundGrid server -- gives you unequaled processing power. With full plugin integration inside your DAW, the DLS enables you to monitor and mix using up to hundreds of SoundGrid-compatible Waves and third-party plugins in real time, with the very low latency of only 0.8 milliseconds.DiGiGrid DLS operates in two modes -- I/O and SGP -- that offer different features based on your needs. In I/O mode, the DLS is designed to act as a bridge between Pro Tools systems and the DLS's built-in DSP server. In this mode the HD/HDX or HD Native system remains your playback engine, while the DLS appears as individual I/O units from which you can expand your studio by offloading your plugin processing to the built-in server and by connecting to additional SoundGrid I/Os. In SGP mode, the DLS enables you to control a variety of DigiLink enabled I/Os, bridge your favorite DAW (Logic, Cubase, Nuendo, Ableton, Pro Tools Native etc.) with SoundGrid applications and ASIO/Core Audio drivers, and offload your plugin processing to the built-in DSP server. In both modes, you can connect addtional SoundGrid-compatible components to your system with a single CAT5e/CAT6 Ethernet cable.Specs:Power Cord: 1 US, 1 EU, 1 UKEthernet Cable: CAT5e (2 meters)Registration CardDiGiGrid DLS features built-in SoundGrid DSP server and network switchDual DigiLink ports providing up to 64 inputs/outputsBridges Pro Tools HD/HDX and HD Native systems with SoundGridEnables convenient and seamelss use of a variety of DigiLink-compliant I/O devices with any native DAWCompliant with the SoundGrid ASIO/Core Audio driverCompatible with MultiRackConnects via a single Ethernet cable (CAT5e/CAT6)2 DigiLink ports; 64 channels in either SGP or I/O mode (32 channels per port). Compatible with the following DigiLink-enabled I/Os: Digi192, Digi96, HD Omni, HD I/O, Apogee Symphony I/O, Lynx Aurora 8, Lynx Aurora 16I/O Mode: DLS acts as an interface connected to HD Core, HD Accel, HDX, or HD Native cards; supports Pro Tools TDM 10.x and 11.xSGP Mode: DLS acts as a controller for DigiLink-enabled I/Os2 Operation Mode switches2 SoundGrid RJ45 Ethernet ports1 AC Input1 Word Clock/Loop Sync I/O1 USB Port2U Rackmount chassisSupported sample rates: 44.1, 48, 88.2, and 96 kHz (176.4 and 192 kHz will be supported in the future)Recovery switchClocking Options: Work Clock/Loop Sync, SoundGrid (Sync over Ethernet), or DigiLink
These are amazing interfaces for adding DSP power (DLS only) to your rig AND for networking audio in your studio without the need for expensive cables. With the DiGiGrid DLS you'll get higher track and Waves/SoundGrid-compatible plug-in counts, more processing power, with lower latency than Pro Tools HDX. Imagine instantly upgrading your Waves Bundle to AAX-DSP - and you can do it with any DAW - non-HD Pro Tools, Logic, etc.Additional Info:The DiGiGrid DLS interface offers a comprehensive processing and networking hub for your Pro Tools system. Sporting two DigiLink ports that are capable of delivering up to 64 inputs and outputs, along with a built-in SoundGrid DSP server and a network switch, this interface hub is designed to give you more processing power by bridging Pro Tools systems with SoundGrid. It also provides a bridge from legacy TDM systems.The DiGiGrid DLI is the same unit without the SoundGrid DSP server. However, with a DLS in one room and a DLI in the other, you can send DSP power to any computer on the network.These units work in concert with the free SoundGrid Studio System software, which includes the SoundGrid Studio application, StudioRack, and the eMotion ST mixer. Used in combination with this software, the DLS -- with its built-in SoundGrid server -- gives you unequaled processing power. With full plugin integration inside your DAW, the DLS enables you to monitor and mix using up to hundreds of SoundGrid-compatible Waves and third-party plugins in real time, with the very low latency of only 0.8 milliseconds.DiGiGrid DLS operates in two modes -- I/O and SGP -- that offer different features based on your needs. In I/O mode, the DLS is designed to act as a bridge between Pro Tools systems and the DLS's built-in DSP server. In this mode the HD/HDX or HD Native system remains your playback engine, while the DLS appears as individual I/O units from which you can expand your studio by offloading your plugin processing to the built-in server and by connecting to additional SoundGrid I/Os. In SGP mode, the DLS enables you to control a variety of DigiLink enabled I/Os, bridge your favorite DAW (Logic, Cubase, Nuendo, Ableton, Pro Tools Native etc.) with SoundGrid applications and ASIO/Core Audio drivers, and offload your plugin processing to the built-in DSP server. In both modes, you can connect addtional SoundGrid-compatible components to your system with a single CAT5e/CAT6 Ethernet cable.