Back to the main page Back to category JBL VRX918SP 18Inch Flyable Powe
musical instrument details
JBL VRX918SP 18" Self Powered Sub VRX 918 SP 918SP Active Subwoofer
Estimated price for orientation: 990 $
Category: JBL VRX918SP 18Inch Flyable Powe
Class:
Description Condition: New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: JBL Active/Passive: Active Type: Subwoofer RMS Power: 1500W Model: VRX918SP Country/Region of Manufacture: Mexico MPN: VRX918SP
Specifications Frequency Range (-10 dB): 31 Hz - 220 Hz
Frequency Response (ᄆ3 dB): 34 Hz - 220 Hz
Maximum Peak Output1: 126 dB SPL at 1m
LF Driver: 1 x JBL 2268FF 457 mm (18 in) dual voice coil
Differential Drive woofer with neodymium-magnet
Bandpass Nominal Impedance: LF: 2 x 2 ohms
DPC-2 Internal Amplification Output (at nominal load): 1500 Watts Peak, 750 Watts Continuous
DPC-2 Output as (Continuous IEC shaped pink noise into rated load impedance): LF: 750 Watts
DPC-2 Output Section: LF: Dual-Bridged Technology, Class D
Audio Input Connector: XLR with loop through
User Controls: Input Attenuator (0-16 dB)
Selectable 80 Hz or 120 Hz Low Pass
80 Hz High-Pass enable/disable for XLR loop thru.
Signal Processing: DSP based, resident in Input Module
System Management: DSP based limiters for mechanical and thermal protection.
AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz
AC Line Voltage: User selectable: 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
AC Current Requirements: 6A per system at 120V, 3A per system at 240V
Enclosure: 18 mm birch plywood.
Suspension / Mounting: Optional VRX-AF line-array frame kit or 10 mm forged eyebolts
Finish: Black DuraFlex finish
Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent foam
Dimensions (H x W x D): 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)
Net Weight: 38.5 kg (85 lb)
Optional Accessories: VRX-AF array frame
SRX718S-CVR: Pull-over padded cover (works with WK-4S)
SS4-BK adjustable satellite speaker pole
WK-4S Caster kit
Description
Condition: | New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | JBL |
Active/Passive: | Active | Type: | Subwoofer |
RMS Power: | 1500W | Model: | VRX918SP |
Country/Region of Manufacture: | Mexico | MPN: | VRX918SP |
Specifications Frequency Range (-10 dB): 31 Hz - 220 Hz
Frequency Response (ᄆ3 dB): 34 Hz - 220 Hz
Maximum Peak Output1: 126 dB SPL at 1m
LF Driver: 1 x JBL 2268FF 457 mm (18 in) dual voice coil
Differential Drive woofer with neodymium-magnet
Bandpass Nominal Impedance: LF: 2 x 2 ohms
DPC-2 Internal Amplification Output (at nominal load): 1500 Watts Peak, 750 Watts Continuous
DPC-2 Output as (Continuous IEC shaped pink noise into rated load impedance): LF: 750 Watts
DPC-2 Output Section: LF: Dual-Bridged Technology, Class D
Audio Input Connector: XLR with loop through
User Controls: Input Attenuator (0-16 dB)
Selectable 80 Hz or 120 Hz Low Pass
80 Hz High-Pass enable/disable for XLR loop thru.
Signal Processing: DSP based, resident in Input Module
System Management: DSP based limiters for mechanical and thermal protection.
AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz
AC Line Voltage: User selectable: 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
AC Current Requirements: 6A per system at 120V, 3A per system at 240V
Enclosure: 18 mm birch plywood.
Suspension / Mounting: Optional VRX-AF line-array frame kit or 10 mm forged eyebolts
Finish: Black DuraFlex finish
Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent foam
Dimensions (H x W x D): 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)
Net Weight: 38.5 kg (85 lb)
Optional Accessories: VRX-AF array frame
SRX718S-CVR: Pull-over padded cover (works with WK-4S)
SS4-BK adjustable satellite speaker pole
WK-4S Caster kit
Frequency Response (ᄆ3 dB): 34 Hz - 220 Hz
Maximum Peak Output1: 126 dB SPL at 1m
LF Driver: 1 x JBL 2268FF 457 mm (18 in) dual voice coil
Differential Drive woofer with neodymium-magnet
Bandpass Nominal Impedance: LF: 2 x 2 ohms
DPC-2 Internal Amplification Output (at nominal load): 1500 Watts Peak, 750 Watts Continuous
DPC-2 Output as (Continuous IEC shaped pink noise into rated load impedance): LF: 750 Watts
DPC-2 Output Section: LF: Dual-Bridged Technology, Class D
Audio Input Connector: XLR with loop through
User Controls: Input Attenuator (0-16 dB)
Selectable 80 Hz or 120 Hz Low Pass
80 Hz High-Pass enable/disable for XLR loop thru.
Signal Processing: DSP based, resident in Input Module
System Management: DSP based limiters for mechanical and thermal protection.
AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz
AC Line Voltage: User selectable: 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
AC Current Requirements: 6A per system at 120V, 3A per system at 240V
Enclosure: 18 mm birch plywood.
Suspension / Mounting: Optional VRX-AF line-array frame kit or 10 mm forged eyebolts
Finish: Black DuraFlex finish
Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent foam
Dimensions (H x W x D): 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)
Net Weight: 38.5 kg (85 lb)
Optional Accessories: VRX-AF array frame
SRX718S-CVR: Pull-over padded cover (works with WK-4S)
SS4-BK adjustable satellite speaker pole
WK-4S Caster kit