Back to the main page Back to category Speakers and Monitors
musical instrument details
BOOM! TWO (2) QSC KW153 Active Loudspeaker 1000 Watt + QSC Covers
Estimated price for orientation: 480 $
Category: Speakers and Monitors
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition RMS Power: 1000W Active/Passive: Active Brand: QSC
First and foremost, look at our 100% positive, A+ feedback. We believe in clear, honest representation and communication. NO BS. Buy with confidence!They are registered and I believe they balance of a six year warranty from QSC (use would require servicing under my name at an authorized QSC shop). Local pick up. We would consider skidding them for freight pick up for $160 and you pay and schedule freight from 20707. We also have a few dance floor(s), stage monitors and lighting to sell. Call Jordan 202-238-9011Features15” woofer; 6.5” midrange woofer; 1.75” diaphragm compression driver
75° conical DMT coverageMaximum SPL 134 dB peak1000-watt Class D power modules in all models (2 × 500 W continuous)Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced outputExtensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performanceDMT™ (Directivity Matched Transition) ensures uniform coverage across the entire sound fieldRugged, texture-painted birch enclosuresFour-position Mic/Line gainTour-grade 16 gauge steel grillesComfortable ergonomic handles35 mm standard (non-tilt) pole socketM10 rigging points for suspended installationSPECIFICATIONS KW153Configuration 15" 3-way trapezoidalTransducersLow-frequencyMid-frequency High-frequency 15" cone transducer6.5" mid range cone transducer1.75" diaphragm compression driverFrequency Response (-6 dB) 35 Hz to 18 kHzFrequency Range (-10 dB) 33 Hz to 20 kHzNominal Coverage (-6 dB) 75° axisymmetricMaximum SPL1 134 dB peakAmplifierPower Output2 1000 W Class D (500 W LF + 500 W MF/HF) continuous2000 W peakInput Impedance Channel A XLR / ¼":Mic gain setting Balanced Unbalanced0 dB 38 kΩ 19 kΩ+12 dB 10 kΩ 5 kΩ+24 dB 2.66 kΩ 1.33 kΩ+36 dB 660Ω 330ΩChannel B XLR / ¼": 38 kΩ balanced / 19 kΩ unbalancedChannel B RCA: 10 kΩControls Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)Indicators Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)Connectors Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connectorCooling On demand, 50 mm variable speed fanAmplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™Transducer Protection Thermal limiting, excursion limitingAC Power Input Universal power supply 100–240 VAC, 50 to 60 HzAC Power Consumption(1/8 Power) 100 VAC, 2.3 A120 VAC, 2.01 A230 VAC, 1.13 AEnclosureMaterial 15 mm painted birch plywoodFinish Black textured paintGrille Black powder coated 16 gauge steelDimensions (HWD) inches 43.1 x 18.5 x 16.8Dimensions (HWD) mm 1094 × 470 × 427Net Weight 87 lb / 39.5 kgAvailable Accessories KW153 cover, KW M10 kit
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | RMS Power: | 1000W |
| Active/Passive: | Active | Brand: | QSC |
First and foremost, look at our 100% positive, A+ feedback. We believe in clear, honest representation and communication. NO BS. Buy with confidence!
They are registered and I believe they balance of a six year warranty from QSC (use would require servicing under my name at an authorized QSC shop).
75° conical DMT coverageMaximum SPL 134 dB peak1000-watt Class D power modules in all models (2 × 500 W continuous)Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced outputExtensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performanceDMT™ (Directivity Matched Transition) ensures uniform coverage across the entire sound fieldRugged, texture-painted birch enclosuresFour-position Mic/Line gainTour-grade 16 gauge steel grillesComfortable ergonomic handles35 mm standard (non-tilt) pole socketM10 rigging points for suspended installationSPECIFICATIONS KW153Configuration 15" 3-way trapezoidalTransducersLow-frequencyMid-frequency High-frequency 15" cone transducer6.5" mid range cone transducer1.75" diaphragm compression driverFrequency Response (-6 dB) 35 Hz to 18 kHzFrequency Range (-10 dB) 33 Hz to 20 kHzNominal Coverage (-6 dB) 75° axisymmetricMaximum SPL1 134 dB peakAmplifierPower Output2 1000 W Class D (500 W LF + 500 W MF/HF) continuous2000 W peakInput Impedance Channel A XLR / ¼":Mic gain setting Balanced Unbalanced0 dB 38 kΩ 19 kΩ+12 dB 10 kΩ 5 kΩ+24 dB 2.66 kΩ 1.33 kΩ+36 dB 660Ω 330ΩChannel B XLR / ¼": 38 kΩ balanced / 19 kΩ unbalancedChannel B RCA: 10 kΩControls Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)Indicators Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)Connectors Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connectorCooling On demand, 50 mm variable speed fanAmplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™Transducer Protection Thermal limiting, excursion limitingAC Power Input Universal power supply 100–240 VAC, 50 to 60 HzAC Power Consumption(1/8 Power) 100 VAC, 2.3 A120 VAC, 2.01 A230 VAC, 1.13 AEnclosureMaterial 15 mm painted birch plywoodFinish Black textured paintGrille Black powder coated 16 gauge steelDimensions (HWD) inches 43.1 x 18.5 x 16.8Dimensions (HWD) mm 1094 × 470 × 427Net Weight 87 lb / 39.5 kgAvailable Accessories KW153 cover, KW M10 kit
Local pick up. We would consider skidding them for freight pick up for $160 and you pay and schedule freight from 20707. We also have a few dance floor(s), stage monitors and lighting to sell. Call Jordan 202-238-9011
Features15” woofer; 6.5” midrange woofer; 1.75” diaphragm compression driver75° conical DMT coverageMaximum SPL 134 dB peak1000-watt Class D power modules in all models (2 × 500 W continuous)Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced outputExtensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performanceDMT™ (Directivity Matched Transition) ensures uniform coverage across the entire sound fieldRugged, texture-painted birch enclosuresFour-position Mic/Line gainTour-grade 16 gauge steel grillesComfortable ergonomic handles35 mm standard (non-tilt) pole socketM10 rigging points for suspended installationSPECIFICATIONS KW153Configuration 15" 3-way trapezoidalTransducersLow-frequencyMid-frequency High-frequency 15" cone transducer6.5" mid range cone transducer1.75" diaphragm compression driverFrequency Response (-6 dB) 35 Hz to 18 kHzFrequency Range (-10 dB) 33 Hz to 20 kHzNominal Coverage (-6 dB) 75° axisymmetricMaximum SPL1 134 dB peakAmplifierPower Output2 1000 W Class D (500 W LF + 500 W MF/HF) continuous2000 W peakInput Impedance Channel A XLR / ¼":Mic gain setting Balanced Unbalanced0 dB 38 kΩ 19 kΩ+12 dB 10 kΩ 5 kΩ+24 dB 2.66 kΩ 1.33 kΩ+36 dB 660Ω 330ΩChannel B XLR / ¼": 38 kΩ balanced / 19 kΩ unbalancedChannel B RCA: 10 kΩControls Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)Indicators Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)Connectors Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connectorCooling On demand, 50 mm variable speed fanAmplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™Transducer Protection Thermal limiting, excursion limitingAC Power Input Universal power supply 100–240 VAC, 50 to 60 HzAC Power Consumption(1/8 Power) 100 VAC, 2.3 A120 VAC, 2.01 A230 VAC, 1.13 AEnclosureMaterial 15 mm painted birch plywoodFinish Black textured paintGrille Black powder coated 16 gauge steelDimensions (HWD) inches 43.1 x 18.5 x 16.8Dimensions (HWD) mm 1094 × 470 × 427Net Weight 87 lb / 39.5 kgAvailable Accessories KW153 cover, KW M10 kit