Back to the main page Back to category Recorders
musical instrument details
DR-100MK3 TASCAM Linear PCM Recorder from Japan
Estimated price for orientation: 545 $
Category: Recorders
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Model: TASCAM Brand: TASCAM MPN: DR-100MK3 UPC: N/A
Specification Recording media: SD card (64MB ~ 2GB), SDHC card (4GB ~ 32GB), SDXC card (48GB ~ 128GB)
File Format:
WAV: 44.1k / 48k / 88.2k / 96k / 176.4k / 192k Hz,
16/24 bit
MP3: 44.1k / 48k Hz, 128k / 192k / 256k / 320kbps
Number of channels: 2-channel (stereo)
Playback speed control: (VSA) -50% ~ + 200% (1% step)
Connector: XLR-3-31, (1: GND, 2: HOT, 3: COLD), 6.3mm (1/4 ") TRS phone jack (Tip: HOT, Ring: COLD, Sleeve: GND) ※ XLR only phantom power corresponding Input impedance
XLR input: 2kΩ or more
TRS input: 20kΩ or more
The minimum input level: -70.5dBu (PAD Off)
Maximum input level: -14dBu (PAD On) When the input source "LINE" selection
Input impedance: 20kΩ or more
Reference input level: + 4dBu
Maximum input level: + 24dBu Connector: 1/8 "(3.5mm) stereo mini jack ※ plug-in power support When the input source "EXT MIC" selection
Input impedance: 50kΩ or more
The minimum input level: -46.8dBu (PAD Off)
Maximum input level: -2.8dBu (PAD On) When the input source "EXT LINE" selection
Input impedance: 2kΩ or more
Reference input level: + 6dBV
Maximum input level: -10dBV LINE OUT
Connector: 1/8 "(3.5mm) stereo mini jack
Output impedance: 200Ω
When the input source "EXT LINE" selection
Reference output level: -14dBV
Maximum output level: + 6dBV
Other
Reference output level: -10dBV
Maximum output level: + 6dBV Headphone output
Connector: 1/8 "(3.5mm) stereo mini jack
Maximum output: 40mW + 40mW (at the headphone connection, when the 32Ω load)
Built-in speaker: 0.4W (monaural) DIGITAL IN
Connector: 1/8 "(3.5mm) TRS jack (use only conversion cable)
Format: AES3-2003 / IEC60958-4 (AES / EBU), IEC60958-3 (S / PDIF) USB
Connector: micro-B type
Format: USB2.0 HIGH SPEED mass storage class REMOTE
Connector: 2.5mmTRS Jack
Compatible Products: RC-10, RC-3F Tripod mounting hole: 1/4 inch camera screw
Power supply: built-in lithium ion rechargeable battery (3,950mAh), two AA batteries (alkaline batteries, nickel-metal hydride battery or a lithium battery), USB bus power, a dedicated AC adapter (TASCAM PS-P520E, sold separately), a dedicated external battery pack (TASCAM BP-6AA, sold separately)
Power consumption: 7.5W (at the maximum) Battery duration (continuous operation)
Built-in battery (lithium-ion rechargeable battery) is used:
UNI MIC (built-in directional microphone) input, phantom power OFF
About 12 hours (STEREO WAV (BWF), 44.1kHz, recording in 16-bit)
MIC / LINE IN terminal / microphone input, phantom power ON (48V, load: 3mA x 2)
About 6 hours (STEREO WAV (BWF), 44.1kHz, recording in 16-bit)
Using alkaline batteries at the time:
(EVOLTA)
UNI MIC (built-in directional microphone) input, phantom power OFF
About 2 hours and 45 minutes (STEREO WAV (BWF), 44.1kHz, recording in 16-bit)
MIC / LINE IN terminal / microphone input, phantom power ON (48V, load: 3mA x 2)
About 1 hour (STEREO WAV (BWF), 44.1kHz, recording in 16-bit)
Lithium batteries used:
(Energizer ULTIMATE LITHIUM)
UNI MIC (built-in directional microphone) input, phantom power OFF
About 7 hours (STEREO WAV (BWF), 44.1kHz, recording in 16-bit)
MIC / LINE IN terminal / microphone input, phantom power ON (48V, load: 3mA x 2)
About 3 hours and 30 minutes (STEREO WAV (BWF), 44.1kHz, recording in 16-bit) Dimensions: 80 (W) × 155.7 (H) × 35 (D) mm (excluding protrusions)
Mass: 425g (including the battery) / 375g (without batteries)
Operating temperature: 0 ~ 40 ℃
Accessories: digital input conversion cable, instruction manual (with warranty) Frequency characteristic
Fs = 44.1k / 48k Hz: 20Hz-20kHz + 0.5dB / -1dB
Fs = 88.2k / 96k Hz: 20Hz-40kHz + 0.5dB / -2dB
Fs = 176.4k / 192k Hz: 20Hz-80kHz + 0.5dB / -4dB Distortion: 0.007% or less (Fs = 44.1k / 48k / 88.2k / 96k / 176.4k / 192k Hz, JEITA)
S / N ratio: 102dB or more (Fs = 44.1k / 48k / 88.2k / 96k / 176.4k / 192k, JEITA)
Equivalent input noise: 124dBu below
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Model: | TASCAM |
| Brand: | TASCAM | MPN: | DR-100MK3 |
| UPC: | N/A |
File Format:
WAV: 44.1k / 48k / 88.2k / 96k / 176.4k / 192k Hz,
16/24 bit
MP3: 44.1k / 48k Hz, 128k / 192k / 256k / 320kbps
Number of channels: 2-channel (stereo)
Playback speed control: (VSA) -50% ~ + 200% (1% step)
Connector: XLR-3-31, (1: GND, 2: HOT, 3: COLD), 6.3mm (1/4 ") TRS phone jack (Tip: HOT, Ring: COLD, Sleeve: GND) ※ XLR only phantom power corresponding Input impedance
XLR input: 2kΩ or more
TRS input: 20kΩ or more
The minimum input level: -70.5dBu (PAD Off)
Maximum input level: -14dBu (PAD On) When the input source "LINE" selection
Input impedance: 20kΩ or more
Reference input level: + 4dBu
Maximum input level: + 24dBu Connector: 1/8 "(3.5mm) stereo mini jack ※ plug-in power support When the input source "EXT MIC" selection
Input impedance: 50kΩ or more
The minimum input level: -46.8dBu (PAD Off)
Maximum input level: -2.8dBu (PAD On) When the input source "EXT LINE" selection
Input impedance: 2kΩ or more
Reference input level: + 6dBV
Maximum input level: -10dBV LINE OUT
Connector: 1/8 "(3.5mm) stereo mini jack
Output impedance: 200Ω
When the input source "EXT LINE" selection
Reference output level: -14dBV
Maximum output level: + 6dBV
Other
Reference output level: -10dBV
Maximum output level: + 6dBV Headphone output
Connector: 1/8 "(3.5mm) stereo mini jack
Maximum output: 40mW + 40mW (at the headphone connection, when the 32Ω load)
Built-in speaker: 0.4W (monaural) DIGITAL IN
Connector: 1/8 "(3.5mm) TRS jack (use only conversion cable)
Format: AES3-2003 / IEC60958-4 (AES / EBU), IEC60958-3 (S / PDIF) USB
Connector: micro-B type
Format: USB2.0 HIGH SPEED mass storage class REMOTE
Connector: 2.5mmTRS Jack
Compatible Products: RC-10, RC-3F Tripod mounting hole: 1/4 inch camera screw
Power supply: built-in lithium ion rechargeable battery (3,950mAh), two AA batteries (alkaline batteries, nickel-metal hydride battery or a lithium battery), USB bus power, a dedicated AC adapter (TASCAM PS-P520E, sold separately), a dedicated external battery pack (TASCAM BP-6AA, sold separately)
Power consumption: 7.5W (at the maximum) Battery duration (continuous operation)
Built-in battery (lithium-ion rechargeable battery) is used:
UNI MIC (built-in directional microphone) input, phantom power OFF
About 12 hours (STEREO WAV (BWF), 44.1kHz, recording in 16-bit)
MIC / LINE IN terminal / microphone input, phantom power ON (48V, load: 3mA x 2)
About 6 hours (STEREO WAV (BWF), 44.1kHz, recording in 16-bit)
Using alkaline batteries at the time:
(EVOLTA)
UNI MIC (built-in directional microphone) input, phantom power OFF
About 2 hours and 45 minutes (STEREO WAV (BWF), 44.1kHz, recording in 16-bit)
MIC / LINE IN terminal / microphone input, phantom power ON (48V, load: 3mA x 2)
About 1 hour (STEREO WAV (BWF), 44.1kHz, recording in 16-bit)
Lithium batteries used:
(Energizer ULTIMATE LITHIUM)
UNI MIC (built-in directional microphone) input, phantom power OFF
About 7 hours (STEREO WAV (BWF), 44.1kHz, recording in 16-bit)
MIC / LINE IN terminal / microphone input, phantom power ON (48V, load: 3mA x 2)
About 3 hours and 30 minutes (STEREO WAV (BWF), 44.1kHz, recording in 16-bit) Dimensions: 80 (W) × 155.7 (H) × 35 (D) mm (excluding protrusions)
Mass: 425g (including the battery) / 375g (without batteries)
Operating temperature: 0 ~ 40 ℃
Accessories: digital input conversion cable, instruction manual (with warranty) Frequency characteristic
Fs = 44.1k / 48k Hz: 20Hz-20kHz + 0.5dB / -1dB
Fs = 88.2k / 96k Hz: 20Hz-40kHz + 0.5dB / -2dB
Fs = 176.4k / 192k Hz: 20Hz-80kHz + 0.5dB / -4dB Distortion: 0.007% or less (Fs = 44.1k / 48k / 88.2k / 96k / 176.4k / 192k Hz, JEITA)
S / N ratio: 102dB or more (Fs = 44.1k / 48k / 88.2k / 96k / 176.4k / 192k, JEITA)
Equivalent input noise: 124dBu below