Back to the main page Back to category Shure FP33 Professional 3 Channe
musical instrument details
New Shure FP33 3-Channel Stereo Mixer FP-33 FP 33 Shure Field Mixer!
Estimated price for orientation: 1 499 $
Category: Shure FP33 Professional 3 Channe
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Shure MPN: FP33 Model: FP33 UPC: Does not apply
Specifications:Inputs
3 - Balanced XLR InputsOutput
2 - Balanced XLR OutputsMonitor/Headphone Out
2 - 1/4" TRS Phone / 3.5mm stereo headphone outputs.ALT I/O
Monitor In 3.5mm jack
Tape Output 3.5mm jackLink Input/Output
"MIX BUS" connection: mini 3-Pin XLR connectionImpedance
Input
Mic - (designed for use with 19 to 600 ohms source) 1k ohm internal, -10 dBV clip level
Line - (designed for use with < / - 1k ohms source) 50k ohms internal, +36 dBV clip level
Monitor - (designed for use with < / - 1k ohms impedance source) 10k ohms internal, +21 dBV clip level
Outputs
Mic - (designed for use with Low-Z input source) 1 ohm internal, -31 dBV clip level
Line - (designed for use with 600 ohms source) 150 ohms internal, +18 dBm clip level
Tape - (designed for use with > 10k ohms source) 2.2k ohms internal, +3 dBV clip level
Headphones - (designed for use with 8 to 200 ohms source) 300 ohms internal, +11 dBV clip levelGain
Low-Z Mic Input: Line 78dB, Mic 28dB, Headphone 89dB, Tape 66dB
Line: Line 28dB, Mic -22dB, Headphone 39dB, Tape 16dB
Monitor: Headphone 11dBHum & Noise
Output Noise:
Master level fully CCW: < / - 100dBV, 20 to 20,000 Hz
Master level fully CW: < / - 80dBV, 20 to 20,000 Hz
Equivalent Input Noise:
-127 dBV with 150 ohm source, 20 to 20,000 HzFrequency Response
20 to 20,000 Hz +/- 2.0 dB (channel controls centered)Distortion
0.25% THD a +4 dBm output, 50 to 20,000 HzMetering
VU Left/Right Channel Output Level Meters: 0 VU preset at +4dBm output levelControls
Inner/Outer Ring pots: Master Output Level (L/R) and Headphone Monitor
Level Control pots: Input Channels 1-3
Pan Control pots: Input Channels 1-3
Switches: Power, Mic/Line Level Input & Output, Low-Cut Filter (channels 1-3), 1kHz Oscillator, Link, Output Peak Limiter, Meter Lamp/Battery Check Switch, Monitor Input Switch
Buttons: Slate ButtonControl Voltage Out
NoPhantom Power
12 Volt: through matched 680 ohms
48 Volt: through matched 6.8k ohms
12 Volt T (A-B): through matched 180 ohmsOperating Temperature
Operating: 0 to 60 degrees C (32 to 140 degrees F)
Storage: -40 to 85 degrees C (-40 to 185 degrees F)Power
Internal: Two 9V alkaline batteries
External: 12-30 Vdc to dc In jack; non-polarized
Current Drain: Approximately 41mA (idle) at 18 V
Battery Life: 8 hours minimum, typicalDimensions
2.26 x 7.24 x 6.33 (58 x 184 x 161mm) (H x W x D)Weight
3.5 lbs (1.6 kg)
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Shure |
| MPN: | FP33 | Model: | FP33 |
| UPC: | Does not apply |
Specifications:Inputs
3 - Balanced XLR InputsOutput
2 - Balanced XLR OutputsMonitor/Headphone Out
2 - 1/4" TRS Phone / 3.5mm stereo headphone outputs.ALT I/O
Monitor In 3.5mm jack
Tape Output 3.5mm jackLink Input/Output
"MIX BUS" connection: mini 3-Pin XLR connectionImpedance
Input
Mic - (designed for use with 19 to 600 ohms source) 1k ohm internal, -10 dBV clip level
Line - (designed for use with < / - 1k ohms source) 50k ohms internal, +36 dBV clip level
Monitor - (designed for use with < / - 1k ohms impedance source) 10k ohms internal, +21 dBV clip level
Outputs
Mic - (designed for use with Low-Z input source) 1 ohm internal, -31 dBV clip level
Line - (designed for use with 600 ohms source) 150 ohms internal, +18 dBm clip level
Tape - (designed for use with > 10k ohms source) 2.2k ohms internal, +3 dBV clip level
Headphones - (designed for use with 8 to 200 ohms source) 300 ohms internal, +11 dBV clip levelGain
Low-Z Mic Input: Line 78dB, Mic 28dB, Headphone 89dB, Tape 66dB
Line: Line 28dB, Mic -22dB, Headphone 39dB, Tape 16dB
Monitor: Headphone 11dBHum & Noise
Output Noise:
Master level fully CCW: < / - 100dBV, 20 to 20,000 Hz
Master level fully CW: < / - 80dBV, 20 to 20,000 Hz
Equivalent Input Noise:
-127 dBV with 150 ohm source, 20 to 20,000 HzFrequency Response
20 to 20,000 Hz +/- 2.0 dB (channel controls centered)Distortion
0.25% THD a +4 dBm output, 50 to 20,000 HzMetering
VU Left/Right Channel Output Level Meters: 0 VU preset at +4dBm output levelControls
Inner/Outer Ring pots: Master Output Level (L/R) and Headphone Monitor
Level Control pots: Input Channels 1-3
Pan Control pots: Input Channels 1-3
Switches: Power, Mic/Line Level Input & Output, Low-Cut Filter (channels 1-3), 1kHz Oscillator, Link, Output Peak Limiter, Meter Lamp/Battery Check Switch, Monitor Input Switch
Buttons: Slate ButtonControl Voltage Out
NoPhantom Power
12 Volt: through matched 680 ohms
48 Volt: through matched 6.8k ohms
12 Volt T (A-B): through matched 180 ohmsOperating Temperature
Operating: 0 to 60 degrees C (32 to 140 degrees F)
Storage: -40 to 85 degrees C (-40 to 185 degrees F)Power
Internal: Two 9V alkaline batteries
External: 12-30 Vdc to dc In jack; non-polarized
Current Drain: Approximately 41mA (idle) at 18 V
Battery Life: 8 hours minimum, typicalDimensions
2.26 x 7.24 x 6.33 (58 x 184 x 161mm) (H x W x D)Weight
3.5 lbs (1.6 kg)
3 - Balanced XLR InputsOutput
2 - Balanced XLR OutputsMonitor/Headphone Out
2 - 1/4" TRS Phone / 3.5mm stereo headphone outputs.ALT I/O
Monitor In 3.5mm jack
Tape Output 3.5mm jackLink Input/Output
"MIX BUS" connection: mini 3-Pin XLR connectionImpedance
Input
Mic - (designed for use with 19 to 600 ohms source) 1k ohm internal, -10 dBV clip level
Line - (designed for use with < / - 1k ohms source) 50k ohms internal, +36 dBV clip level
Monitor - (designed for use with < / - 1k ohms impedance source) 10k ohms internal, +21 dBV clip level
Outputs
Mic - (designed for use with Low-Z input source) 1 ohm internal, -31 dBV clip level
Line - (designed for use with 600 ohms source) 150 ohms internal, +18 dBm clip level
Tape - (designed for use with > 10k ohms source) 2.2k ohms internal, +3 dBV clip level
Headphones - (designed for use with 8 to 200 ohms source) 300 ohms internal, +11 dBV clip levelGain
Low-Z Mic Input: Line 78dB, Mic 28dB, Headphone 89dB, Tape 66dB
Line: Line 28dB, Mic -22dB, Headphone 39dB, Tape 16dB
Monitor: Headphone 11dBHum & Noise
Output Noise:
Master level fully CCW: < / - 100dBV, 20 to 20,000 Hz
Master level fully CW: < / - 80dBV, 20 to 20,000 Hz
Equivalent Input Noise:
-127 dBV with 150 ohm source, 20 to 20,000 HzFrequency Response
20 to 20,000 Hz +/- 2.0 dB (channel controls centered)Distortion
0.25% THD a +4 dBm output, 50 to 20,000 HzMetering
VU Left/Right Channel Output Level Meters: 0 VU preset at +4dBm output levelControls
Inner/Outer Ring pots: Master Output Level (L/R) and Headphone Monitor
Level Control pots: Input Channels 1-3
Pan Control pots: Input Channels 1-3
Switches: Power, Mic/Line Level Input & Output, Low-Cut Filter (channels 1-3), 1kHz Oscillator, Link, Output Peak Limiter, Meter Lamp/Battery Check Switch, Monitor Input Switch
Buttons: Slate ButtonControl Voltage Out
NoPhantom Power
12 Volt: through matched 680 ohms
48 Volt: through matched 6.8k ohms
12 Volt T (A-B): through matched 180 ohmsOperating Temperature
Operating: 0 to 60 degrees C (32 to 140 degrees F)
Storage: -40 to 85 degrees C (-40 to 185 degrees F)Power
Internal: Two 9V alkaline batteries
External: 12-30 Vdc to dc In jack; non-polarized
Current Drain: Approximately 41mA (idle) at 18 V
Battery Life: 8 hours minimum, typicalDimensions
2.26 x 7.24 x 6.33 (58 x 184 x 161mm) (H x W x D)Weight
3.5 lbs (1.6 kg)