Back to the main page Back to category PreSonus StudioLive 315ai 3way 1
musical instrument details
Presonus StudioLive 315AI Active Integration Loudspeaker and Cover (pair)
Estimated price for orientation: 1 998 $
Category: PreSonus StudioLive 315ai 3way 1
Class:
Description Brand: Presonus MPN: StudioLive 315AI Type: PA Speaker Active/Passive: Active Model: StudioLive 315AI UPC: Does not apply
Main ComponentsUnique coaxial design integrates a custom-designed, 8-inch, ferrite midrange driver and 1.75-inch titanium compression driver with Temporal Equalization™ and Coaxial Speaker Coherence Alignment15-inch, custom-designed, ferrite, low-frequency transducer2,000 watt, triamped, Class D amplificationLF 2x500 watts / 1x1,000 wattsMF 1x500 wattsHF 1x500 wattsActive Integration 32-bit, 96 kHz DSP with more processing power than three rack speaker processors32-bit floating-point DSP with asymmetric three-way crossover, Temporal Equalization for horn reflection, linear time- and amplitude-anomalies correction, performance contouring, dynamic limiting, and excursion limitingXMAX Class A mic preamp with 12V phantom powerUniversal Switch mode power supply with power-factor correctionControls and Networking4 operation modes optimized for:Normal — live front-of-houseMP3 — music playbackFloor Monitor — stage wedgeUser — customizable presetLine-level input with attenuationSpeaker-attenuation controlBalanced XLR Mix outputExternal Subwoofer mode activates a low-cut filter and alignment delay for combining StudioLive® 18sAI subwoofer with 315AI in a true 4-way systemWireless or wired networking with free SL Room Control software for Mac®, Windows®, and iPad® enables complete setup, tuning, and monitoringNetwork Setup Wizard automatically detects each speaker and allows you to quickly connect to your wireless router networkRemote control over Maximum SPL/output level, high-pass filter, onboard operational modes, performance monitoring, mute, and speaker delay31-band graphic EQ and 8-band parametric EQ (total of 10, including feedback notch filter)Visually display room layout on a laptop or iPadEdit, save, recall, and share speaker-setup parametersConvenience FeaturesComfortable, ergonomic handlesIntegrated M10 fly points and pole mountsShips with Ethernet connection for wired control; optional Dante™ cardTechnical SpecificationsAcoustic Performance Configuration 3-way, triamplified loudspeaker system Frequency Response (-10 dB) 46 Hz to 23 kHz Frequency Response (-6 dB) 52 Hz to 22 kHz Nominal Coverage (-6 dB) 90° x 60° Maximum Peak SPL 131 dB Crossover Frequency LF: (overlapped) 100 Hz - 1 kHz, HF: 1.8 kHz Directivity Index (DI) 10 dB, >420 Hz Directivity Factor (Q) 10.0, >420 Hz
Transducer LF Transducer 1x15" Ferrite MF Transducer 8" CoActual™ HF Transducer 1.75" compression driver
Amplifier Type Class D Total Power Output 2,000W (total power without protection algorithms and limiter enabled) LF Power 2 x 500W MF Power 500W HF Power 500W Rated THD <0.05% (20 Hz - 20 kHz) Dynamic Range 119 dB (A-weighted) Bandwidth 20 Hz - 20 kHz Cooling Free air convection
Connections and Controls Input Channels 1 mic, 1 line Input Connector Types 1 XLR (F), 1 combo Phantom Power 15 VDC (Ch. 1 only) Mic Input Impedance 1 kΩ Line Input Impedance 10 kΩ Maximum Input +22 dBu Output Connector 1 XLR (M) - Mix out Controls Mic Level (Variable: Off to +48 dB), Line Attenuation (Variable: -24 dB to 0 dB), Speaker Attenuation (Variable: -24 dB to 0 dB) Indicators DSP Preset, HPF On/Off, Network Connected, Network Activity, Wi-Fi Setup, Wi-Fi On, Signal, Limit, Clip, Thermal
DSP Contour Presets Normal, LBR Source, Floor Monitor HPF 100 Hz, 4th-order Linkwitz-Riley Bit Depth 24-bit Sample Rate 96 kHz
Enclosure Material Eucalyptus Plywood Finish Chemline™ polyurethane Grille Powder-coated steel Dimensions (HxDxW) 27.9" x 21.3" x 18.6"
(708.66 x 541 mm x 472.44) Unit Weight 71 lbs (32.2 kg) Handles One on each side Monitor Angle 50°
Safety Amplifier Protection Over-current, DC, over/under-voltage, over-temperature, high frequency Transducer Protection 4-ch. multi-threat limiter
Power AC Power Input 100-230V~, 50-60 Hz AC Power Consumption (1/8 Power) 250W
Suspension Mounting Rigging Points 12 M10 Mounting 35 mm, 2-position
Description
Brand: | Presonus | MPN: | StudioLive 315AI |
Type: | PA Speaker | Active/Passive: | Active |
Model: | StudioLive 315AI | UPC: | Does not apply |
Main ComponentsUnique coaxial design integrates a custom-designed, 8-inch, ferrite midrange driver and 1.75-inch titanium compression driver with Temporal Equalization™ and Coaxial Speaker Coherence Alignment15-inch, custom-designed, ferrite, low-frequency transducer2,000 watt, triamped, Class D amplificationLF 2x500 watts / 1x1,000 wattsMF 1x500 wattsHF 1x500 wattsActive Integration 32-bit, 96 kHz DSP with more processing power than three rack speaker processors32-bit floating-point DSP with asymmetric three-way crossover, Temporal Equalization for horn reflection, linear time- and amplitude-anomalies correction, performance contouring, dynamic limiting, and excursion limitingXMAX Class A mic preamp with 12V phantom powerUniversal Switch mode power supply with power-factor correctionControls and Networking4 operation modes optimized for:Normal — live front-of-houseMP3 — music playbackFloor Monitor — stage wedgeUser — customizable presetLine-level input with attenuationSpeaker-attenuation controlBalanced XLR Mix outputExternal Subwoofer mode activates a low-cut filter and alignment delay for combining StudioLive® 18sAI subwoofer with 315AI in a true 4-way systemWireless or wired networking with free SL Room Control software for Mac®, Windows®, and iPad® enables complete setup, tuning, and monitoringNetwork Setup Wizard automatically detects each speaker and allows you to quickly connect to your wireless router networkRemote control over Maximum SPL/output level, high-pass filter, onboard operational modes, performance monitoring, mute, and speaker delay31-band graphic EQ and 8-band parametric EQ (total of 10, including feedback notch filter)Visually display room layout on a laptop or iPadEdit, save, recall, and share speaker-setup parametersConvenience FeaturesComfortable, ergonomic handlesIntegrated M10 fly points and pole mountsShips with Ethernet connection for wired control; optional Dante™ card
Technical Specifications
Acoustic Performance | |
---|---|
Configuration | 3-way, triamplified loudspeaker system |
Frequency Response (-10 dB) | 46 Hz to 23 kHz |
Frequency Response (-6 dB) | 52 Hz to 22 kHz |
Nominal Coverage (-6 dB) | 90° x 60° |
Maximum Peak SPL | 131 dB |
Crossover Frequency | LF: (overlapped) 100 Hz - 1 kHz, HF: 1.8 kHz |
Directivity Index (DI) | 10 dB, >420 Hz |
Directivity Factor (Q) | 10.0, >420 Hz |
Transducer | |
---|---|
LF Transducer | 1x15" Ferrite |
MF Transducer | 8" CoActual™ |
HF Transducer | 1.75" compression driver |
Amplifier | |
---|---|
Type | Class D |
Total Power Output | 2,000W (total power without protection algorithms and limiter enabled) |
LF Power | 2 x 500W |
MF Power | 500W |
HF Power | 500W |
Rated THD | <0.05% (20 Hz - 20 kHz) |
Dynamic Range | 119 dB (A-weighted) |
Bandwidth | 20 Hz - 20 kHz |
Cooling | Free air convection |
Connections and Controls | |
---|---|
Input Channels | 1 mic, 1 line |
Input Connector Types | 1 XLR (F), 1 combo |
Phantom Power | 15 VDC (Ch. 1 only) |
Mic Input Impedance | 1 kΩ |
Line Input Impedance | 10 kΩ |
Maximum Input | +22 dBu |
Output Connector | 1 XLR (M) - Mix out |
Controls | Mic Level (Variable: Off to +48 dB), Line Attenuation (Variable: -24 dB to 0 dB), Speaker Attenuation (Variable: -24 dB to 0 dB) |
Indicators | DSP Preset, HPF On/Off, Network Connected, Network Activity, Wi-Fi Setup, Wi-Fi On, Signal, Limit, Clip, Thermal |
DSP | |
---|---|
Contour Presets | Normal, LBR Source, Floor Monitor |
HPF | 100 Hz, 4th-order Linkwitz-Riley |
Bit Depth | 24-bit |
Sample Rate | 96 kHz |
Enclosure | |
---|---|
Material | Eucalyptus Plywood |
Finish | Chemline™ polyurethane |
Grille | Powder-coated steel |
Dimensions (HxDxW) | 27.9" x 21.3" x 18.6" (708.66 x 541 mm x 472.44) |
Unit Weight | 71 lbs (32.2 kg) |
Handles | One on each side |
Monitor Angle | 50° |
Safety | |
---|---|
Amplifier Protection | Over-current, DC, over/under-voltage, over-temperature, high frequency |
Transducer Protection | 4-ch. multi-threat limiter |
Power | |
---|---|
AC Power Input | 100-230V~, 50-60 Hz |
AC Power Consumption (1/8 Power) | 250W |
Suspension Mounting | |
---|---|
Rigging Points | 12 M10 |
Mounting | 35 mm, 2-position |