Back to the main page Back to category Other Pro Audio Equipment
musical instrument details
Telos The Link Intercom to Telephone Interface for RTS Clearcom Telex Intercom
Estimated price for orientation: 999 $
Category: Other Pro Audio Equipment
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Clear-Com Model: The Link
With Rackmount This Item is in Perfect working condition.2. RackmountThe Telos Link solves the problem of interconnecting production intercom systems with dial-up telephone lines. Anyone with access to a telephone, even a cellular phone, can instantly and automatically be connected with your intercom. Digital auto-nulling hybrids on both the telephone and intercom audio paths allows connections to be made without the usual gain and feedback problems, while maintaining natural, full-duplex operation. The result is significantly improved communication capability.Specifications:
TECHNICAL SPECIFICATIONSSystem
True digital. Second generation Texas Instruments
TMS320C25 processor. 8kHz sampling rate. Digital
input and output gain processing, filtering.Trans-hybrid Loss
>40dB with pink noise or voice as test input. Test
set-up as specified in our Telephone Q & A.Send Level to Phone Line
-10dBm average level. Maintained by internal digital AGC.Frequency Response (caller to intercom)
200–3400Hz, ±1 dB.Noise and Distortion (caller to intercom)
Distortion: <0. 5% THD+N, measured @ 1kHz at
any caller level from -48dBm to -8dBm.Signal-to-Noise
>60dB referenced to -18dBm phone level. >72 dB
referenced to OdBm phone line level.Monitor Audio Output
Three-pin male XLR connector. Active differential.
Typical output level OdBm. Will drive 600? .Intercom Interface
Bi-lateral current source interface for standard
intercom systems. Three-pin XLR female connector.
Selectable via front panel switch for channel 1,
channel 2, or balanced mode operation. Intercom
send and receive level variable from approximately
-20dBv to -OdBv.Channel 2/wet mode provides 18V at up to l00ma
to power one or two standard belt packs.
Four-wire interface is provided via rear panel DB-15 connector.
Unbalanced, 600?, level variable from -20dBv to -OdBv.Physical Dimensions
7 1?4” x 1 1?2” x 9 15?32”
18.4cm x 3.8cm x 24cmPower supply
External plug transformer. 9V DC, 500ma. Available
for 117V/60Hz or 230V/50Hz AC.Optional Accessories
Rack mount kits that hold one or two Telos Links
in a single rack unit.
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Clear-Com |
| Model: | The Link |
With Rackmount This Item is in Perfect working condition.2. Rackmount
The Telos Link solves the problem of interconnecting production intercom systems with dial-up telephone lines. Anyone with access to a telephone, even a cellular phone, can instantly and automatically be connected with your intercom. Digital auto-nulling hybrids on both the telephone and intercom audio paths allows connections to be made without the usual gain and feedback problems, while maintaining natural, full-duplex operation. The result is significantly improved communication capability.Specifications:
TECHNICAL SPECIFICATIONSSystem
True digital. Second generation Texas Instruments
TMS320C25 processor. 8kHz sampling rate. Digital
input and output gain processing, filtering.Trans-hybrid Loss
>40dB with pink noise or voice as test input. Test
set-up as specified in our Telephone Q & A.Send Level to Phone Line
-10dBm average level. Maintained by internal digital AGC.Frequency Response (caller to intercom)
200–3400Hz, ±1 dB.Noise and Distortion (caller to intercom)
Distortion: <0. 5% THD+N, measured @ 1kHz at
any caller level from -48dBm to -8dBm.Signal-to-Noise
>60dB referenced to -18dBm phone level. >72 dB
referenced to OdBm phone line level.Monitor Audio Output
Three-pin male XLR connector. Active differential.
Typical output level OdBm. Will drive 600? .Intercom Interface
Bi-lateral current source interface for standard
intercom systems. Three-pin XLR female connector.
Selectable via front panel switch for channel 1,
channel 2, or balanced mode operation. Intercom
send and receive level variable from approximately
-20dBv to -OdBv.Channel 2/wet mode provides 18V at up to l00ma
to power one or two standard belt packs.
Four-wire interface is provided via rear panel DB-15 connector.
Unbalanced, 600?, level variable from -20dBv to -OdBv.Physical Dimensions
7 1?4” x 1 1?2” x 9 15?32”
18.4cm x 3.8cm x 24cmPower supply
External plug transformer. 9V DC, 500ma. Available
for 117V/60Hz or 230V/50Hz AC.Optional Accessories
Rack mount kits that hold one or two Telos Links
in a single rack unit.
TECHNICAL SPECIFICATIONSSystem
True digital. Second generation Texas Instruments
TMS320C25 processor. 8kHz sampling rate. Digital
input and output gain processing, filtering.Trans-hybrid Loss
>40dB with pink noise or voice as test input. Test
set-up as specified in our Telephone Q & A.Send Level to Phone Line
-10dBm average level. Maintained by internal digital AGC.Frequency Response (caller to intercom)
200–3400Hz, ±1 dB.Noise and Distortion (caller to intercom)
Distortion: <0. 5% THD+N, measured @ 1kHz at
any caller level from -48dBm to -8dBm.Signal-to-Noise
>60dB referenced to -18dBm phone level. >72 dB
referenced to OdBm phone line level.Monitor Audio Output
Three-pin male XLR connector. Active differential.
Typical output level OdBm. Will drive 600? .Intercom Interface
Bi-lateral current source interface for standard
intercom systems. Three-pin XLR female connector.
Selectable via front panel switch for channel 1,
channel 2, or balanced mode operation. Intercom
send and receive level variable from approximately
-20dBv to -OdBv.Channel 2/wet mode provides 18V at up to l00ma
to power one or two standard belt packs.
Four-wire interface is provided via rear panel DB-15 connector.
Unbalanced, 600?, level variable from -20dBv to -OdBv.Physical Dimensions
7 1?4” x 1 1?2” x 9 15?32”
18.4cm x 3.8cm x 24cmPower supply
External plug transformer. 9V DC, 500ma. Available
for 117V/60Hz or 230V/50Hz AC.Optional Accessories
Rack mount kits that hold one or two Telos Links
in a single rack unit.