Back to the main page Back to category Speakers and Monitors
musical instrument details
Xw12 Monitor Mix System
Estimated price for orientation: 22 000 $
Category: Speakers and Monitors
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition
5x xw12 cases are included in this package and the amplifiers are racked in 12u ECM racks with captive doors and include rack-mounted Lumi power distros and an XLR in/thru NL4 output panel. XW12
• The Electro-Voice Xw12 full-range, twoway, floor monitor loudspeaker system is part of the Electro-Voice X-Array™ series and is intended for high-level sound reinforcement in fixed-installation and touring-sound applications.
• 12-inch woofer design provides improved internal damping of cone
• 1.4-inch compression driver
• Rugged 12-ply ultracompact, uniquely curved enclosure
• Constant-directivity 80° x 55° horn
• Professional Neutrik Speakon® paralleled pass-through connectors on both ends of enclosure DX38
• 2 input, 4 output Balance XLR connections
• 6, 12, 18, 24 dB/oct. slope; Butterworth, Bessel, Linkwitz-Riley
• 26 parametric equalizers, Low-Shelving equalizer, LPN (Lowpass-Notch) switchable,Hi-Shelving equalizer, 6 / 12 dB slope
• switchable, Lo-Cut filter (B-6 alignment switchable), Hi-Cut filter, All-Pass filter
• 4 digital compressors / limiters
• 3 master delays (2 ms - 900 ms), 4 channel delays (0 ms - 900 ms), delay-increment 21 ?sec.
• 24-bit linear AD / DA conversion, 48-bit processing, Sampling rate 48 kHz QSC PL230
• 900 watts per ch. @ 4ohms
• PowerLight Switching Technology for improved audio performance
• High-efficiency Class H output circuits lower AC current consumption and cooling requirements by over 40% (PowerLight 224, 230, & 236)
• Increased airflow for improved thermal performance
• DataPort for remote computer control or the addition of external DSP modules
• Detented gain controls with 1 dB steps for precise calibration
• User defeatable clip limiters and selectable low-frequency filter (5, 30, or 50 Hz)
• 1/4" TRS*, XLR, and 3-pin detachable terminal block input connectors
• Neutrik Speakon® and "Touch Proof" binding post outputs
• "Locking" IEC power cable remains secure on the road Please feel free to contact us with any questions you may have. Thanks for looking!
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition |
5x xw12 cases are included in this package and the amplifiers are racked in 12u ECM racks with captive doors and include rack-mounted Lumi power distros and an XLR in/thru NL4 output panel. XW12
• The Electro-Voice Xw12 full-range, twoway, floor monitor loudspeaker system is part of the Electro-Voice X-Array™ series and is intended for high-level sound reinforcement in fixed-installation and touring-sound applications.
• 12-inch woofer design provides improved internal damping of cone
• 1.4-inch compression driver
• Rugged 12-ply ultracompact, uniquely curved enclosure
• Constant-directivity 80° x 55° horn
• Professional Neutrik Speakon® paralleled pass-through connectors on both ends of enclosure DX38
• 2 input, 4 output Balance XLR connections
• 6, 12, 18, 24 dB/oct. slope; Butterworth, Bessel, Linkwitz-Riley
• 26 parametric equalizers, Low-Shelving equalizer, LPN (Lowpass-Notch) switchable,Hi-Shelving equalizer, 6 / 12 dB slope
• switchable, Lo-Cut filter (B-6 alignment switchable), Hi-Cut filter, All-Pass filter
• 4 digital compressors / limiters
• 3 master delays (2 ms - 900 ms), 4 channel delays (0 ms - 900 ms), delay-increment 21 ?sec.
• 24-bit linear AD / DA conversion, 48-bit processing, Sampling rate 48 kHz QSC PL230
• 900 watts per ch. @ 4ohms
• PowerLight Switching Technology for improved audio performance
• High-efficiency Class H output circuits lower AC current consumption and cooling requirements by over 40% (PowerLight 224, 230, & 236)
• Increased airflow for improved thermal performance
• DataPort for remote computer control or the addition of external DSP modules
• Detented gain controls with 1 dB steps for precise calibration
• User defeatable clip limiters and selectable low-frequency filter (5, 30, or 50 Hz)
• 1/4" TRS*, XLR, and 3-pin detachable terminal block input connectors
• Neutrik Speakon® and "Touch Proof" binding post outputs
• "Locking" IEC power cable remains secure on the road Please feel free to contact us with any questions you may have. Thanks for looking!
• The Electro-Voice Xw12 full-range, twoway, floor monitor loudspeaker system is part of the Electro-Voice X-Array™ series and is intended for high-level sound reinforcement in fixed-installation and touring-sound applications.
• 12-inch woofer design provides improved internal damping of cone
• 1.4-inch compression driver
• Rugged 12-ply ultracompact, uniquely curved enclosure
• Constant-directivity 80° x 55° horn
• Professional Neutrik Speakon® paralleled pass-through connectors on both ends of enclosure DX38
• 2 input, 4 output Balance XLR connections
• 6, 12, 18, 24 dB/oct. slope; Butterworth, Bessel, Linkwitz-Riley
• 26 parametric equalizers, Low-Shelving equalizer, LPN (Lowpass-Notch) switchable,Hi-Shelving equalizer, 6 / 12 dB slope
• switchable, Lo-Cut filter (B-6 alignment switchable), Hi-Cut filter, All-Pass filter
• 4 digital compressors / limiters
• 3 master delays (2 ms - 900 ms), 4 channel delays (0 ms - 900 ms), delay-increment 21 ?sec.
• 24-bit linear AD / DA conversion, 48-bit processing, Sampling rate 48 kHz QSC PL230
• 900 watts per ch. @ 4ohms
• PowerLight Switching Technology for improved audio performance
• High-efficiency Class H output circuits lower AC current consumption and cooling requirements by over 40% (PowerLight 224, 230, & 236)
• Increased airflow for improved thermal performance
• DataPort for remote computer control or the addition of external DSP modules
• Detented gain controls with 1 dB steps for precise calibration
• User defeatable clip limiters and selectable low-frequency filter (5, 30, or 50 Hz)
• 1/4" TRS*, XLR, and 3-pin detachable terminal block input connectors
• Neutrik Speakon® and "Touch Proof" binding post outputs
• "Locking" IEC power cable remains secure on the road Please feel free to contact us with any questions you may have. Thanks for looking!