Back to the main page Back to category Live and Studio Mixers
musical instrument details
Amek Recall 40x8x2 Analogue Audio Mixing Console Superb Condition
Estimated price for orientation: 9 000 $
Category: Live and Studio Mixers
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Amek Country/Region of Manufacture: United Kingdom Model: Recall 40
Description: Amek Recall 40 input modules frame fitted with 32 mono mic/line input modules (RL-1), 8 stereo line input modules (RL-10), 8 groups (RL-2), one main output module (RL-3) and one monitor module (RL-4) designed by Graham Langley, manufactured by Amek. The console is in superb physical condition and working order fully serviced prior the auction. Each module is fitted with high quality microphone and line preamplifier, very flexible, great sounding musical four band parametric EQ, High/Low pass filters and Direct Output. The console is powered by two external power supplies. The DC cables and a copy of the manual are included in this auction. This console was never ever on the road – we've just removed it from a permanent installation (corporate hall where it was used very seldom). This is the list of the modules fitted in the console: Qty Model Description 32 RL 1 Mono Mic/Line Channel Module 8 RL 10 Stereo Line Channel Module 8 RL 2 Matrix/Group Module 1 RL 3 Stereo Master Module 1 RL 4 Mater Monitor L.S. Control Module 2 400 Series Mains Power Supply Unit 2 400 Series DC Power Supply Cables
Technical specifications of the input module: RL1 by Graham Langley Inputs: - The mic input has a variable gain from 10dB to 60dB; - The line input is variable from -15dB to +35dB; - 15dB pad is fitted; - Phantom Power is sent to the Mic XLR connector when the 48V (+48V DC) switch is pressed; Equalization: - The EQ is designed by Graham Langley; - LOW PASS filter continuously variable between 800Hz and 20kHz @ 12dB per octave; - HIGH PASS filter continuously variable between 20Hz and 1kHz @ 12dB per octave; - HF (high frequency): continuously variable between 1.5kHz and 18kHz, boost/cut +/-18dB, Bell/Shelf switch; - HMF (high mid frequency): continuously variable between 450Hz and 8kHz, boost/cut +/-14dB, switch Q of 0.7 or 2; - LMF (low mid frequency): continuously variable between 80Hz and 1,5kHz, boost/cut +/-14dB, switch Q of 0.7 or2; - LF (low frequency): continuously variable between 30Hz and 350kHz, boost/cut +/-18dB, Bell/Shelf switch; - Separate in/out switches are provided for the filters and EQ section; Insert: - The insert point is post EQ, pre-fader and it has it’s own In/Out switch; - An internal switch allows the Insert to be positioned pre-EQ if required; - Phase Reverse switch directly follows the insert point; Direct Output: - The Direct Aux 12 inserts send 12 into the Direct Output path to provide a variable output level. An internal jumper allows the Direct Output signal to be delivered Pre EQ if required. Meter: - Each channel has a 8 LED Pre-Fader Meter calibrated f
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Amek |
| Country/Region of Manufacture: | United Kingdom | Model: | Recall 40 |
Description: Amek Recall 40 input modules frame fitted with 32 mono mic/line input modules (RL-1), 8 stereo line input modules (RL-10), 8 groups (RL-2), one main output module (RL-3) and one monitor module (RL-4) designed by Graham Langley, manufactured by Amek. The console is in superb physical condition and working order fully serviced prior the auction. Each module is fitted with high quality microphone and line preamplifier, very flexible, great sounding musical four band parametric EQ, High/Low pass filters and Direct Output. The console is powered by two external power supplies. The DC cables and a copy of the manual are included in this auction. This console was never ever on the road – we've just removed it from a permanent installation (corporate hall where it was used very seldom). This is the list of the modules fitted in the console: Qty Model Description 32 RL 1 Mono Mic/Line Channel Module 8 RL 10 Stereo Line Channel Module 8 RL 2 Matrix/Group Module 1 RL 3 Stereo Master Module 1 RL 4 Mater Monitor L.S. Control Module 2 400 Series Mains Power Supply Unit 2 400 Series DC Power Supply Cables
Technical specifications of the input module: RL1 by Graham Langley Inputs: - The mic input has a variable gain from 10dB to 60dB; - The line input is variable from -15dB to +35dB; - 15dB pad is fitted; - Phantom Power is sent to the Mic XLR connector when the 48V (+48V DC) switch is pressed; Equalization: - The EQ is designed by Graham Langley; - LOW PASS filter continuously variable between 800Hz and 20kHz @ 12dB per octave; - HIGH PASS filter continuously variable between 20Hz and 1kHz @ 12dB per octave; - HF (high frequency): continuously variable between 1.5kHz and 18kHz, boost/cut +/-18dB, Bell/Shelf switch; - HMF (high mid frequency): continuously variable between 450Hz and 8kHz, boost/cut +/-14dB, switch Q of 0.7 or 2; - LMF (low mid frequency): continuously variable between 80Hz and 1,5kHz, boost/cut +/-14dB, switch Q of 0.7 or2; - LF (low frequency): continuously variable between 30Hz and 350kHz, boost/cut +/-18dB, Bell/Shelf switch; - Separate in/out switches are provided for the filters and EQ section; Insert: - The insert point is post EQ, pre-fader and it has it’s own In/Out switch; - An internal switch allows the Insert to be positioned pre-EQ if required; - Phase Reverse switch directly follows the insert point; Direct Output: - The Direct Aux 12 inserts send 12 into the Direct Output path to provide a variable output level. An internal jumper allows the Direct Output signal to be delivered Pre EQ if required. Meter: - Each channel has a 8 LED Pre-Fader Meter calibrated f
Technical specifications of the input module: RL1 by Graham Langley Inputs: - The mic input has a variable gain from 10dB to 60dB; - The line input is variable from -15dB to +35dB; - 15dB pad is fitted; - Phantom Power is sent to the Mic XLR connector when the 48V (+48V DC) switch is pressed; Equalization: - The EQ is designed by Graham Langley; - LOW PASS filter continuously variable between 800Hz and 20kHz @ 12dB per octave; - HIGH PASS filter continuously variable between 20Hz and 1kHz @ 12dB per octave; - HF (high frequency): continuously variable between 1.5kHz and 18kHz, boost/cut +/-18dB, Bell/Shelf switch; - HMF (high mid frequency): continuously variable between 450Hz and 8kHz, boost/cut +/-14dB, switch Q of 0.7 or 2; - LMF (low mid frequency): continuously variable between 80Hz and 1,5kHz, boost/cut +/-14dB, switch Q of 0.7 or2; - LF (low frequency): continuously variable between 30Hz and 350kHz, boost/cut +/-18dB, Bell/Shelf switch; - Separate in/out switches are provided for the filters and EQ section; Insert: - The insert point is post EQ, pre-fader and it has it’s own In/Out switch; - An internal switch allows the Insert to be positioned pre-EQ if required; - Phase Reverse switch directly follows the insert point; Direct Output: - The Direct Aux 12 inserts send 12 into the Direct Output path to provide a variable output level. An internal jumper allows the Direct Output signal to be delivered Pre EQ if required. Meter: - Each channel has a 8 LED Pre-Fader Meter calibrated f