| Audio Technica ATW-1312 Bodypack and Handheld Rackmount Digital Wireless System | | This is a no hassle BUY IT NOW listing for your convenience with FREE NEXT DAY SHIPPING in the continental United States! | | | | Brand New Audio Technica ATW-1312 with Full Factory WarrantyRackmount Digital Wireless Handheld and Bodypack Combination Microphone SystemRetail Price: $1089.00Includes: (1) Audio Technica ATW-RC13 Receiver Chassis with Rackmount Adapters (2) Audio Technica ATW-RU13 Wireless Receiver Unit (1) Audio Technica ATW-T1001 Bodypack Transmitter (1) Audio Technica ATW-T1002 Handheld Transmitter (2) Audio Technica AT8690 Receiver Unit Mounting Bracket (1) Joining Plate (1) RJ12 Cable (1) AC Power Adapter (1) Operator's Instructions | | Click on an image to open in new window |
| | Description | Audio-Technica’s System 10 PRO Rack-Mount digital wireless system provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 wireless system but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels. Like all the products in the System 10 wireless family, the PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity. | | Features: | Specifications: | Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performanceOperates in the 2.4 GHz range -- completely free from TV interferenceReceiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatilityUp to five chassis (ten receiver units) can be linked and used simultaneouslyEach receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurationsChassis' System ID Display shows RF signal level, system ID, transmitter battery level, and system link statusAutomatic frequency selection for seamless, interference-free operationExtremely easy operation with instantaneous channel selection, sync, and setupThree levels of diversity assurance: frequency, time & spaceGround-lift switch helps eliminate audible hum caused by ground loops | Operating Frequencies: 2.4 GHz ISM bandDynamic Range: >109 dB (A-weighted), typicalTotal Harmonic Distortion: Operating Range: 60 m (200') Open range env. with no interfering signalsOperating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperaturesFrequency Response: 20 Hz to 20 kHz Depending on microphone typeReceiving System: Diversity (frequency/time/space)RECEIVER Output Connectors: Remote Receiver Connector: RJ45, Link Connector: RJ12RECEIVER Maximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBVRECEIVER Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode externalRECEIVER Dimensions: 209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") DRECEIVER Net Weight: 940 grams (33.2 oz)RECEIVER Accessory Included: Power supply, AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feetBODY-PACK RF Power Output: 10 mWBODY-PACK Spurious Emissions: Following federal and national regulationsBODY-PACK Input Connections: Four-pin Locking Connector, Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9VBODY-PACK Batteries: Two 1.5V AA (not included)BODY-PACK Battery Life: >7 hours (alkaline) Depending on battery type and use patternBODY-PACK Dimensions: 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") DBODY-PACK Net Weight: 100 grams (3.5 oz) without batteriesHANDHELD RF Power Output: 10 mWHANDHELD Spurious Emissions: Following federal and national regulationsHANDHELD Batteries: Two 1.5V AA (not included)HANDHELD Battery Life: >7 hours (alkaline) Depending on battery type and use patternHANDHELD Dimensions: 254.8 mm (10.03") long, 50.0 mm (1.97") diameterHANDHELD Net Weight: 280 grams (9.9 oz) without batteriesHANDHELD Accessory Included: AT8456a Quiet-Flex™ stand clamp | |
| | | Return Policy: We want you to be completely satisfied with your purchase from FP Logistics on eBay. Most unused merchandise in re-sellable condition with all original packaging and accessories may be returned for a refund within 30 days of purchase. In the event that you want to return your purchase to FP Logistics, please use the "Return this item" button from your eBay order history.Re-stocking Fees and Shipping Charges All returns are subject to a re-stocking fee. Any shipping and handling charges are non-refundable.Partial Returns To be eligible for a refund, all of the items included with the purchase must be returned. In the case of an incomplete return, no refund will be given. Non-Returnable Items There are a few item types that are not eligible for return. Please refer to this specific product's return policy in the "Shipping and Payments" tab for full details. |
|