Back to the main page Back to category Live and Studio Mixers
musical instrument details
Allen And Heath Xb14-2 Sound Board 14 Channel USB Mixer
Estimated price for orientation: 650 $
Category: Live and Studio Mixers
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Allen & Heath
MIXER IS IN VERY GOOD CONDITION. BELOW ARE THE SPECS. This is a high quality mixer for radio and live broadcast applications. This is not a cheap run of the mill mixer you buy at Radio Shack. Allen & Heath
XB-14-2
XB-14-2 COMPACT BROADCAST MIXER
OVERVIEW IMAGES DOCUMENTS
XB-14-2 OVERVIEW
XB142-Front_MainXB-142 offers a host of specialised broadcast features that normally come at a much higher price, including telephone communication (telco) channels, mic channel ON switch sensing, stereo channel start/cue outputs for playback device control, automatic muting of speaker outputs and much more. XB-142 incorporates new features and styling based on feedback from the many broadcasters who have built their operations around the original XB-14. With a wealth of routing options, dual stereo channels for up to 7 stereo sources, and the addition of a dedicated Audition bus, enhanced microphone preamps and stereo channel gain range, XB-142 satisfies the demands of small radio and internet broadcasters as well as larger studios with multiple rooms. With no less than 27 logic I/O for remote control and 15 configuration switches, XB-142 is a highly flexible solution.
XB-14-2 FEATURES
SELF / PRODUCER OPERATED
Whether you need a mixer for a self-operated broadcast situation, or whether you have a separate studio and engineer, the XB series has features to fit. Separate monitor mixes can be created for operator and guests or presenter, so the engineer can check levels and cue sources while the presenter or guest can listen to a different source. The engineer/producer can communicate to the guest or presenter using the Talk feature, as well as speaking off-air with telephone callers. There is also the facility for remote control of channel mutes from the studio using the remote interface connectors – ideal for studio situated mute or ‘cough’ switches. XB10_f9 XB-142_DuoPre DUOPRE PREAMPS
The XB-142 pre-amps use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge (69dB of range to be exact) and is very evenly distributed around the gain control, meaning better control of signal level. There is no “pad” switch, or pad circuit — line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket. This has the great advantage of lower noise when using the line input. USB
XB-142 comes with a full duplex USB soundcard built-in and many useful routing options for recording and broadcast applications. XB10_USB XB-142_Audtion AUDITION BUS
The dedicated stereo audition bus can be used for auditioning or off air recording. Pressing the button marked AUD on the channels required transfers the mix from the program feed over to the audition bus. TELCO
The two Telco channels provide a selectable clean-feed output (LR PGM, Aux or Audition bus), variable high pass and low pass filters to reduce the frequency range of the channel when used with a telephone caller, and TALK button. XB-142_TelCo FEATURE SUMMARY
4 mic/line channels
4 Dual Source stereo channels
2 Telco channels
HPF and 3-band, swept mid EQ on mono channels
2-band EQ on stereo channels
Variable high pass / low pass filters on Telco channels
Smooth-ride 100mm faders
2-stage, padless pre-amp design
Fader-start sensing on mono channels
Start/cue logic outputs on stereo channels
External meter socket
Separate headphones mix for engineer/producer and 2 guests
Auto mutes on control room outputs
Remote mute facility on mic channels
Configurable USB stereo audio in/out
Audition bus for auditioning and off-air recording
Aux and separate stereo busses for processing/recording
XLR main outputs with inserts
Input signal and peak metering
PRODUCTS
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Allen & Heath |
MIXER IS IN VERY GOOD CONDITION. BELOW ARE THE SPECS. This is a high quality mixer for radio and live broadcast applications. This is not a cheap run of the mill mixer you buy at Radio Shack. Allen & Heath
XB-14-2
XB-14-2 COMPACT BROADCAST MIXER
OVERVIEW IMAGES DOCUMENTS
XB-14-2 OVERVIEW
XB142-Front_MainXB-142 offers a host of specialised broadcast features that normally come at a much higher price, including telephone communication (telco) channels, mic channel ON switch sensing, stereo channel start/cue outputs for playback device control, automatic muting of speaker outputs and much more. XB-142 incorporates new features and styling based on feedback from the many broadcasters who have built their operations around the original XB-14. With a wealth of routing options, dual stereo channels for up to 7 stereo sources, and the addition of a dedicated Audition bus, enhanced microphone preamps and stereo channel gain range, XB-142 satisfies the demands of small radio and internet broadcasters as well as larger studios with multiple rooms. With no less than 27 logic I/O for remote control and 15 configuration switches, XB-142 is a highly flexible solution.
XB-14-2 FEATURES
SELF / PRODUCER OPERATED
Whether you need a mixer for a self-operated broadcast situation, or whether you have a separate studio and engineer, the XB series has features to fit. Separate monitor mixes can be created for operator and guests or presenter, so the engineer can check levels and cue sources while the presenter or guest can listen to a different source. The engineer/producer can communicate to the guest or presenter using the Talk feature, as well as speaking off-air with telephone callers. There is also the facility for remote control of channel mutes from the studio using the remote interface connectors – ideal for studio situated mute or ‘cough’ switches. XB10_f9 XB-142_DuoPre DUOPRE PREAMPS
The XB-142 pre-amps use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge (69dB of range to be exact) and is very evenly distributed around the gain control, meaning better control of signal level. There is no “pad” switch, or pad circuit — line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket. This has the great advantage of lower noise when using the line input. USB
XB-142 comes with a full duplex USB soundcard built-in and many useful routing options for recording and broadcast applications. XB10_USB XB-142_Audtion AUDITION BUS
The dedicated stereo audition bus can be used for auditioning or off air recording. Pressing the button marked AUD on the channels required transfers the mix from the program feed over to the audition bus. TELCO
The two Telco channels provide a selectable clean-feed output (LR PGM, Aux or Audition bus), variable high pass and low pass filters to reduce the frequency range of the channel when used with a telephone caller, and TALK button. XB-142_TelCo FEATURE SUMMARY
4 mic/line channels
4 Dual Source stereo channels
2 Telco channels
HPF and 3-band, swept mid EQ on mono channels
2-band EQ on stereo channels
Variable high pass / low pass filters on Telco channels
Smooth-ride 100mm faders
2-stage, padless pre-amp design
Fader-start sensing on mono channels
Start/cue logic outputs on stereo channels
External meter socket
Separate headphones mix for engineer/producer and 2 guests
Auto mutes on control room outputs
Remote mute facility on mic channels
Configurable USB stereo audio in/out
Audition bus for auditioning and off-air recording
Aux and separate stereo busses for processing/recording
XLR main outputs with inserts
Input signal and peak metering
PRODUCTS
XB-14-2
XB-14-2 COMPACT BROADCAST MIXER
OVERVIEW IMAGES DOCUMENTS
XB-14-2 OVERVIEW
XB142-Front_MainXB-142 offers a host of specialised broadcast features that normally come at a much higher price, including telephone communication (telco) channels, mic channel ON switch sensing, stereo channel start/cue outputs for playback device control, automatic muting of speaker outputs and much more. XB-142 incorporates new features and styling based on feedback from the many broadcasters who have built their operations around the original XB-14. With a wealth of routing options, dual stereo channels for up to 7 stereo sources, and the addition of a dedicated Audition bus, enhanced microphone preamps and stereo channel gain range, XB-142 satisfies the demands of small radio and internet broadcasters as well as larger studios with multiple rooms. With no less than 27 logic I/O for remote control and 15 configuration switches, XB-142 is a highly flexible solution.
XB-14-2 FEATURES
SELF / PRODUCER OPERATED
Whether you need a mixer for a self-operated broadcast situation, or whether you have a separate studio and engineer, the XB series has features to fit. Separate monitor mixes can be created for operator and guests or presenter, so the engineer can check levels and cue sources while the presenter or guest can listen to a different source. The engineer/producer can communicate to the guest or presenter using the Talk feature, as well as speaking off-air with telephone callers. There is also the facility for remote control of channel mutes from the studio using the remote interface connectors – ideal for studio situated mute or ‘cough’ switches. XB10_f9 XB-142_DuoPre DUOPRE PREAMPS
The XB-142 pre-amps use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge (69dB of range to be exact) and is very evenly distributed around the gain control, meaning better control of signal level. There is no “pad” switch, or pad circuit — line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket. This has the great advantage of lower noise when using the line input. USB
XB-142 comes with a full duplex USB soundcard built-in and many useful routing options for recording and broadcast applications. XB10_USB XB-142_Audtion AUDITION BUS
The dedicated stereo audition bus can be used for auditioning or off air recording. Pressing the button marked AUD on the channels required transfers the mix from the program feed over to the audition bus. TELCO
The two Telco channels provide a selectable clean-feed output (LR PGM, Aux or Audition bus), variable high pass and low pass filters to reduce the frequency range of the channel when used with a telephone caller, and TALK button. XB-142_TelCo FEATURE SUMMARY
4 mic/line channels
4 Dual Source stereo channels
2 Telco channels
HPF and 3-band, swept mid EQ on mono channels
2-band EQ on stereo channels
Variable high pass / low pass filters on Telco channels
Smooth-ride 100mm faders
2-stage, padless pre-amp design
Fader-start sensing on mono channels
Start/cue logic outputs on stereo channels
External meter socket
Separate headphones mix for engineer/producer and 2 guests
Auto mutes on control room outputs
Remote mute facility on mic channels
Configurable USB stereo audio in/out
Audition bus for auditioning and off-air recording
Aux and separate stereo busses for processing/recording
XLR main outputs with inserts
Input signal and peak metering
PRODUCTS