Back to the main page Back to category Signal Processors or Rack Effect
musical instrument details
Ashly 4.8SP Protea DSP Loudspeaker System Processor 4-In x 8-Out with USB
Estimated price for orientation: 850 $
Category: Signal Processors or Rack Effect
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Ashly Inputs/Outputs: USB In, USB Out Model: 4.8SP Protea
The 4.8SP is a four input/eight output digital signal processor capable of precise control of a broad range of audio functions. The front panel interface allows quick access to all control parameters by offering dedicated function buttons, eliminating the need for hidden sub-menus. A backlit 2 x 20 character LCD displays channel and function settings. Dedicated buttons provide access to all audio functions and system tools. For even faster set-ups and stronger visualization of Input/Output routing, EQ, and Filter curves, two USB (one on the front and one on the rear panel) and RS-232 port is provided for use with Ashly's control software (Protea Software Suite) and a PC. A six foot USB-A to USB-B cable is provided. Advantages of using the software include greater preset capacity, and a very intuitive visual representation of the audio routing and control process. The Protea 4.8SP utilizes state of the art DSP technologies, beginning with 24-bit, 48kHz delta-sigma A/D converters with 128x oversampling. Digital processing includes Gain, Polarity Invert, Parametric EQ, Shelving Filters, Time Delay, Crossover Functions, Compression, Limiting, and Signal Routing, all taking place in twin 120MHz high performance DSP processors. D/A conversion uses 24 bit delta-sigma converters with 128x oversampling. All inputs and outputs are precision balanced and RF protected using XLR connectors. Each input allows you to control gain, delay and six filters (each of them your choice of parametric, low or high shelf). In addition to setting crossover frequencies, each output may be assigned to any one or a combination of inputs, allows you to program four parametric, low or high shelf filters, delay for time delay adjustments, output gain, reverse polarity and a compressor/limiter for speaker protection. All this in one rack space with XLR input and output connections. The 4.8SP will store up to 30 total presets. A preset file takes a "snapshot" of all current settings and stores complete control data for all channels and all audio functions. The Protea 4.8SP is similar to the older Ashly Protea 4.24C. An existing preset file from the older *.pcc format can be loaded onto the new 4.8SP unit.In all, the Protea 4.8SP is a powerful, easy to use processor for use in live sound or fixed installation applications combining precise audio processing and superior sound. Features:One rack spaceFour inputs - Eight outputsExtremely intuitive user interfaceCrossover, EQ, Delay and Limiter functionsOutputs assignable to any inputSuperior sonic qualityFront panel or PC programming and controlUSB and RS-232 interfaceThird party control friendlyXLR audio connectionsBalanced inputs and outputsParametric filters and comp/limiter to control feedback problemsLinkwitz-Riley, Bessel and Butterworth filters12, 18, 24 and 48dB/Octave slopesParametric EQ: 1/64th to 4 octave range682ms Input and Output delayLimiter on each outputIndividual input and output meteringFour levels of securityApplicationsConventional PA systemsFOHMonitorsAux fed subsL-C-R ConfigurationsMulti-zoned systemsSpecifications:Input: Active balanced, 18k ohmsMax Input Level: +20dBuInput and Output Gain Range: +12/-40dB, 0.1dB incrOutput: Active Balanced, 100 ohmsMax Output Level: +20dBuPolarity: 0 or 180 degreesFrequency Response: 20Hz-20kHz, +/-0.25dBTHD: <0.01% @ 1kHz, +20dBuDynamic Range: >110dB (20Hz-20kHz) unweightedOutput Noise: <-90dBu unweightedEQ Filters: 6 per input - 4 per outputParametric EQ Bandwidth: 1/64th octave to 4 octaveParametric EQ Range: +15/-30dB, 0.1dB incrFrequency Resolution: 1/24th octaveHigh-Shelf EQ Slope: 6 or 12dB/OctaveHigh-Shelf EQ Frequency Range: 19.7Hz to 2kHzHigh-Shelf EQ Range: +/-15dB, 0.1dB incrLow-Shelf EQ Slope: 6 or 12dB/OctaveLow-Shelf EQ Frequency Range: 3.189kHz to 20.159kHzLow-Shelf EQ Range: +/-15dB, 0.1dB incrMaximum Input Delay: 682.5msMaximum Output Delay: 682.5msDelay Increment: 20uSCrossover High-Pass Filter Type: Linkwitz-Riley, Bessel, ButterworthCrossover High-Pass Filter Slope: 12, 18, 24 and 48dB/OctaveCrossover High-Pass Filter Range: Off to 21.98kHz, 245 step incrCrossover Low-Pass Filter Type: Linkwitz-Riley, Bessel, ButterworthCrossover Low-Pass Filter Slope: 12, 18, 24 and 48dB/OctaveCrossover Low-Pass Filter Range: Off to 21.98kHz, 245 step incrCompressor/Limiter Threshold: -20dBu to +20dBu, 1dB incrCompressor/Limiter Ratio: 1.2, 1.5, 2, 3, 4, 6, 10, 20:1, Infinite:1Compressor/Limiter Attack: 0.5ms to 50ms per dBCompressor/Limiter Release: 10ms to 1Sec per dBCompressor/Limiter Range: 20Hz to 10.6kHzInput A/D: 24 bitOutput A/D: 24 bitProcessor: 24 bit, 56 bit accumulatorSample Rate: 48kHzPropogation Delay: 1.46msPower Requirements: 90-240VAC, 30WShipping Weight: 13 lbs (maximum)Dimensions (W x H x D): 19" x 3.5" x 8.5"Connections: XLREnvironmental: 40-120 deg. F (4-49 deg. C) noncondensingUsed but, in mint condition.
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Ashly |
| Inputs/Outputs: | USB In, USB Out | Model: | 4.8SP Protea |
The 4.8SP is a four input/eight output digital signal processor capable of precise control of a broad range of audio functions. The front panel interface allows quick access to all control parameters by offering dedicated function buttons, eliminating the need for hidden sub-menus. A backlit 2 x 20 character LCD displays channel and function settings. Dedicated buttons provide access to all audio functions and system tools. For even faster set-ups and stronger visualization of Input/Output routing, EQ, and Filter curves, two USB (one on the front and one on the rear panel) and RS-232 port is provided for use with Ashly's control software (Protea Software Suite) and a PC. A six foot USB-A to USB-B cable is provided. Advantages of using the software include greater preset capacity, and a very intuitive visual representation of the audio routing and control process. The Protea 4.8SP utilizes state of the art DSP technologies, beginning with 24-bit, 48kHz delta-sigma A/D converters with 128x oversampling. Digital processing includes Gain, Polarity Invert, Parametric EQ, Shelving Filters, Time Delay, Crossover Functions, Compression, Limiting, and Signal Routing, all taking place in twin 120MHz high performance DSP processors. D/A conversion uses 24 bit delta-sigma converters with 128x oversampling. All inputs and outputs are precision balanced and RF protected using XLR connectors. Each input allows you to control gain, delay and six filters (each of them your choice of parametric, low or high shelf). In addition to setting crossover frequencies, each output may be assigned to any one or a combination of inputs, allows you to program four parametric, low or high shelf filters, delay for time delay adjustments, output gain, reverse polarity and a compressor/limiter for speaker protection. All this in one rack space with XLR input and output connections. The 4.8SP will store up to 30 total presets. A preset file takes a "snapshot" of all current settings and stores complete control data for all channels and all audio functions. The Protea 4.8SP is similar to the older Ashly Protea 4.24C. An existing preset file from the older *.pcc format can be loaded onto the new 4.8SP unit.In all, the Protea 4.8SP is a powerful, easy to use processor for use in live sound or fixed installation applications combining precise audio processing and superior sound. Features:One rack spaceFour inputs - Eight outputsExtremely intuitive user interfaceCrossover, EQ, Delay and Limiter functionsOutputs assignable to any inputSuperior sonic qualityFront panel or PC programming and controlUSB and RS-232 interfaceThird party control friendlyXLR audio connectionsBalanced inputs and outputsParametric filters and comp/limiter to control feedback problemsLinkwitz-Riley, Bessel and Butterworth filters12, 18, 24 and 48dB/Octave slopesParametric EQ: 1/64th to 4 octave range682ms Input and Output delayLimiter on each outputIndividual input and output meteringFour levels of securityApplicationsConventional PA systemsFOHMonitorsAux fed subsL-C-R ConfigurationsMulti-zoned systemsSpecifications:Input: Active balanced, 18k ohmsMax Input Level: +20dBuInput and Output Gain Range: +12/-40dB, 0.1dB incrOutput: Active Balanced, 100 ohmsMax Output Level: +20dBuPolarity: 0 or 180 degreesFrequency Response: 20Hz-20kHz, +/-0.25dBTHD: <0.01% @ 1kHz, +20dBuDynamic Range: >110dB (20Hz-20kHz) unweightedOutput Noise: <-90dBu unweightedEQ Filters: 6 per input - 4 per outputParametric EQ Bandwidth: 1/64th octave to 4 octaveParametric EQ Range: +15/-30dB, 0.1dB incrFrequency Resolution: 1/24th octaveHigh-Shelf EQ Slope: 6 or 12dB/OctaveHigh-Shelf EQ Frequency Range: 19.7Hz to 2kHzHigh-Shelf EQ Range: +/-15dB, 0.1dB incrLow-Shelf EQ Slope: 6 or 12dB/OctaveLow-Shelf EQ Frequency Range: 3.189kHz to 20.159kHzLow-Shelf EQ Range: +/-15dB, 0.1dB incrMaximum Input Delay: 682.5msMaximum Output Delay: 682.5msDelay Increment: 20uSCrossover High-Pass Filter Type: Linkwitz-Riley, Bessel, ButterworthCrossover High-Pass Filter Slope: 12, 18, 24 and 48dB/OctaveCrossover High-Pass Filter Range: Off to 21.98kHz, 245 step incrCrossover Low-Pass Filter Type: Linkwitz-Riley, Bessel, ButterworthCrossover Low-Pass Filter Slope: 12, 18, 24 and 48dB/OctaveCrossover Low-Pass Filter Range: Off to 21.98kHz, 245 step incrCompressor/Limiter Threshold: -20dBu to +20dBu, 1dB incrCompressor/Limiter Ratio: 1.2, 1.5, 2, 3, 4, 6, 10, 20:1, Infinite:1Compressor/Limiter Attack: 0.5ms to 50ms per dBCompressor/Limiter Release: 10ms to 1Sec per dBCompressor/Limiter Range: 20Hz to 10.6kHzInput A/D: 24 bitOutput A/D: 24 bitProcessor: 24 bit, 56 bit accumulatorSample Rate: 48kHzPropogation Delay: 1.46msPower Requirements: 90-240VAC, 30WShipping Weight: 13 lbs (maximum)Dimensions (W x H x D): 19" x 3.5" x 8.5"Connections: XLREnvironmental: 40-120 deg. F (4-49 deg. C) noncondensingUsed but, in mint condition.