The Inno Color Beam Z7 Moving Head LED Light Fixture from American DJ uses seven 10W RGBW Quad Color (4-in-1) Osram LEDs. It features motorized zoom allowing for a variable beam angle of 10 to 60°. This moving head fixture can be controlled using a DMX controller or American DJ UC3 series controller (available separately). In addition, it can run independently using its 4 built-in show modes when used in the Sound Active mode. The fixture offers 14 DMX channels, 5 dimmer curve modes, pan/tilt inversion, 16-bit fine pan/tilt, IEC in/out power connectors for daisy chaining power, and a 4-button DMX LCD menu. The Inno Color Beam Z7 is suitable for retail stores, mood lighting, interior & exterior decoration, studios, and nightclubs. Light Source: 7 x 10W RGBW Quad Color (4-in-1) Osram LEDs Moving head fixture with high-output LEDs and motorized zoom Motorized Zoom: 10 to 60° beam angle 3 Operating Modes: Sound Active, DMX Controlled, and Show Mode 14 DMX channels 64 built-in color macros 4 built-in light shows 0 to 100% electronic dimming 5 dimmer curve modes Pan/Tilt Inverse Mode for contrasting movement when fixtures are linked together Fast pan/tilt movement 540° pan and 220° tilt 16-bit fine pan/tilt control 4-button DMX LCD menu Stepper motors with micro stepping Includes an Omega bracket for truss mounting 3-pin XLR in/out for DMX linking Fan cooled Electronic strobe/pulse effect (random strobe slow to fast) Compatible with American DJ UC3 Series controllers (available separately) IEC AC In/out on the rear to daisy chain power (up to 4 units at 120V, up to 8 units at 230V) Multi-Voltage Operation: 100 to 230V, 50/60 Hz 104W power consumption at maximum brightness