Back to the main page Back to category Amplifiers
musical instrument details
RCF IPS 2700 2 x 1100 W CLASS H PROFESSIONAL POWER AMPLIFIER
Estimated price for orientation: 699 $
Category: Amplifiers
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: RCF MPN: IPS 2700 UPC: Does not apply
ebay template RCF IPS 2700 2 x 1100 W CLASS H PROFESSIONAL POWER AMPLIFIERIPS Series is a range of two-way professional amplifiers that combines high quality performance and reliability with the latest power amplifications technologies.
This high value power-to-cost designs offer, in compact lightweight 2 rack unit space, the sound quality and the durability of traditional class AB and class H designs with the innovation of the latest power devices available.
IPS 2700 is a 2 channel power amplifier that delivers up to 2 x 1100 W RMS @ 4 Ω (2200 W RMS bridged @ 8 Ω), weighing just 14.5 kg.
It features independent gain dials, signal clip and fault LEDs, stereo XLR input and Output link, 1.4 V to 0.775 V input sensitivity switch, mono stereo bridge switch, powercon outputs.
Moreover, it is protected against shorts and open circuits.
Thanks to its high efficiency heat sinks and high speed DC fans, the IPS 2700 can withstand the hardest heat conditions ensuring great reliability
SPECIFICATIONS:2 unit 19" rack, easy transportationFast response and low distortionEasy to configure in stereo / mono / bridge modesExtensive protective circuits ensure high reliability and operating safety.Front panel signal / clip / protect LED indicatorsXLR input connectorsSPEAKON NL4 output connectors Amplifier Specifications Power output stereo 4Ω:1100 W rms Power output stereo 8Ω:700 W rms Power output bridged 8Ω:2200 W rms Frequency Response -3 dB:20 Hz ÷ 20 kHz Signal/noise rate:100 dB Crosstalk:-75 dB Damping factor:> 200 Slew rate:10V/μS Input Section Input connector:xlr Input sensitivity:1.4 V (/ 32 26 dB) dBm/V RMS Input impedance:20 kΩ (balanced), 10 kΩ (unbalanced) kΩ System Parameters Cooling:Forced Protections:DC, internal fault, input overload, RF interference, unmatched load, output short-circuit, thermal drift, power supply over-current Amplifier class:H Power Requirements Operating voltage:115 ÷ 240 V (50 / 60 Hz) V ~ Hz Power consumption:700 W Physical Specifications Height:88/3.4 mm/inch Width:482/18.9 mm/inch Depth:255/10 mm/inch Net Weight:12.2/26.8 kg/lbs
Sell Smarter with .
Inventory and Ecommerce Management
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | RCF |
| MPN: | IPS 2700 | UPC: | Does not apply |
ebay template RCF IPS 2700 2 x 1100 W CLASS H PROFESSIONAL POWER AMPLIFIERIPS Series is a range of two-way professional amplifiers that combines high quality performance and reliability with the latest power amplifications technologies.
This high value power-to-cost designs offer, in compact lightweight 2 rack unit space, the sound quality and the durability of traditional class AB and class H designs with the innovation of the latest power devices available.
IPS 2700 is a 2 channel power amplifier that delivers up to 2 x 1100 W RMS @ 4 Ω (2200 W RMS bridged @ 8 Ω), weighing just 14.5 kg.
It features independent gain dials, signal clip and fault LEDs, stereo XLR input and Output link, 1.4 V to 0.775 V input sensitivity switch, mono stereo bridge switch, powercon outputs.
Moreover, it is protected against shorts and open circuits.
Thanks to its high efficiency heat sinks and high speed DC fans, the IPS 2700 can withstand the hardest heat conditions ensuring great reliability
SPECIFICATIONS:2 unit 19" rack, easy transportationFast response and low distortionEasy to configure in stereo / mono / bridge modesExtensive protective circuits ensure high reliability and operating safety.Front panel signal / clip / protect LED indicatorsXLR input connectorsSPEAKON NL4 output connectors
Sell Smarter with .
Inventory and Ecommerce Management
This high value power-to-cost designs offer, in compact lightweight 2 rack unit space, the sound quality and the durability of traditional class AB and class H designs with the innovation of the latest power devices available.
IPS 2700 is a 2 channel power amplifier that delivers up to 2 x 1100 W RMS @ 4 Ω (2200 W RMS bridged @ 8 Ω), weighing just 14.5 kg.
It features independent gain dials, signal clip and fault LEDs, stereo XLR input and Output link, 1.4 V to 0.775 V input sensitivity switch, mono stereo bridge switch, powercon outputs.
Moreover, it is protected against shorts and open circuits.
Thanks to its high efficiency heat sinks and high speed DC fans, the IPS 2700 can withstand the hardest heat conditions ensuring great reliability
SPECIFICATIONS:2 unit 19" rack, easy transportationFast response and low distortionEasy to configure in stereo / mono / bridge modesExtensive protective circuits ensure high reliability and operating safety.Front panel signal / clip / protect LED indicatorsXLR input connectorsSPEAKON NL4 output connectors
Amplifier Specifications
Power output stereo 4Ω:1100 W rms Power output stereo 8Ω:700 W rms Power output bridged 8Ω:2200 W rms Frequency Response -3 dB:20 Hz ÷ 20 kHz Signal/noise rate:100 dB Crosstalk:-75 dB Damping factor:> 200 Slew rate:10V/μS
Input Section
Input connector:xlr Input sensitivity:1.4 V (/ 32 26 dB) dBm/V RMS Input impedance:20 kΩ (balanced), 10 kΩ (unbalanced) kΩ
System Parameters
Cooling:Forced Protections:DC, internal fault, input overload, RF interference, unmatched load, output short-circuit, thermal drift, power supply over-current Amplifier class:H
Power Requirements
Operating voltage:115 ÷ 240 V (50 / 60 Hz) V ~ Hz Power consumption:700 W
Physical Specifications
Height:88/3.4 mm/inch Width:482/18.9 mm/inch Depth:255/10 mm/inch Net Weight:12.2/26.8 kg/lbs
Sell Smarter with .
Inventory and Ecommerce Management