Back to the main page Back to category Amplifiers
musical instrument details
RCF QS 9600 High Power Amplifier
Estimated price for orientation: 2 999 $
Category: Amplifiers
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: RCF MPN: QPS 9600 UPC: Does not apply
ebay template RCF QPS 9600 HIGH POWER AMPLIFIERQPS 9600 is a 4 channel power amplifier that can handle exceptionally high power in a compact and lightweight 2 rack units space.
Thanks to the class HD technology, this amplifier delivers up to 4 x 2400 W RMS @ 2 Ohm (4800 W RMS bridged @ 4 Ohm), weighting just 16 kg.
It comes with switched mode power supply which ensures that a predominantly resistive load is presented to the mains power supply; this also leads to an improved amplifier performance at high output levels. Thanks to its high efficiency heat sinks and variable speed DC fans, the QPS 9600 can withstand the hardest heat conditions ensuring great reliability.SPECIFICATIONS:Fast response and low distortionEasy to configure in stereo / mono / bridge modesExtensive protective circuits ensure high reliability and operating safetyFront panel signal / clippings / protection/ temperature LEDs indicatorsMinimum load impedance (stereo / mono): 2 OhmXLR input connectorsSPEAKON NL4 output connectorsVoltage clip switchable limiters Amplifier Specifications Power output stereo 2Ω:4x2400 W rms Power output stereo 4Ω:4x2200 W rms Power output stereo 8Ω:4x1300 W rms Power output bridged 4Ω:2x4800 W rms Power output bridged 8Ω:2x4400 W rms Frequency Response -3 dB:20 Hz ÷ 25 kHz Signal/noise rate:110 dB Crosstalk:-75 dB Input Section Input connector:xlr Input impedance:20 kΩ (balanced), 10 kΩ (unbalanced) kΩ System Parameters Protections:DC, HF, current, thermal drift Amplifier class:TD Power Requirements Operating voltage:115 ÷ 230 V (50 / 60 Hz) V ~ Hz Power consumption:1950 W Physical Specifications Height:88/3.4 mm/inch Width:482/18.9 mm/inch Depth:445/17.5 mm/inch Net Weight:16/35.2 kg/lbs
Sell Smarter with .
Inventory and Ecommerce Management
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | RCF |
| MPN: | QPS 9600 | UPC: | Does not apply |
ebay template RCF QPS 9600 HIGH POWER AMPLIFIERQPS 9600 is a 4 channel power amplifier that can handle exceptionally high power in a compact and lightweight 2 rack units space.
Thanks to the class HD technology, this amplifier delivers up to 4 x 2400 W RMS @ 2 Ohm (4800 W RMS bridged @ 4 Ohm), weighting just 16 kg.
It comes with switched mode power supply which ensures that a predominantly resistive load is presented to the mains power supply; this also leads to an improved amplifier performance at high output levels. Thanks to its high efficiency heat sinks and variable speed DC fans, the QPS 9600 can withstand the hardest heat conditions ensuring great reliability.SPECIFICATIONS:Fast response and low distortionEasy to configure in stereo / mono / bridge modesExtensive protective circuits ensure high reliability and operating safetyFront panel signal / clippings / protection/ temperature LEDs indicatorsMinimum load impedance (stereo / mono): 2 OhmXLR input connectorsSPEAKON NL4 output connectorsVoltage clip switchable limiters
Sell Smarter with .
Inventory and Ecommerce Management
Thanks to the class HD technology, this amplifier delivers up to 4 x 2400 W RMS @ 2 Ohm (4800 W RMS bridged @ 4 Ohm), weighting just 16 kg.
It comes with switched mode power supply which ensures that a predominantly resistive load is presented to the mains power supply; this also leads to an improved amplifier performance at high output levels. Thanks to its high efficiency heat sinks and variable speed DC fans, the QPS 9600 can withstand the hardest heat conditions ensuring great reliability.SPECIFICATIONS:Fast response and low distortionEasy to configure in stereo / mono / bridge modesExtensive protective circuits ensure high reliability and operating safetyFront panel signal / clippings / protection/ temperature LEDs indicatorsMinimum load impedance (stereo / mono): 2 OhmXLR input connectorsSPEAKON NL4 output connectorsVoltage clip switchable limiters
Amplifier Specifications
Power output stereo 2Ω:4x2400 W rms Power output stereo 4Ω:4x2200 W rms Power output stereo 8Ω:4x1300 W rms Power output bridged 4Ω:2x4800 W rms Power output bridged 8Ω:2x4400 W rms Frequency Response -3 dB:20 Hz ÷ 25 kHz Signal/noise rate:110 dB Crosstalk:-75 dB
Input Section
Input connector:xlr Input impedance:20 kΩ (balanced), 10 kΩ (unbalanced) kΩ
System Parameters
Protections:DC, HF, current, thermal drift Amplifier class:TD
Power Requirements
Operating voltage:115 ÷ 230 V (50 / 60 Hz) V ~ Hz Power consumption:1950 W
Physical Specifications
Height:88/3.4 mm/inch Width:482/18.9 mm/inch Depth:445/17.5 mm/inch Net Weight:16/35.2 kg/lbs
Sell Smarter with .
Inventory and Ecommerce Management