Back to the main page Back to category Preamps and Channel Strips
musical instrument details
Universal Audio UA 4-710D 4 Channel Mic Preamp PERFECT CONDITION - 6 months old
Estimated price for orientation: 1 450 $
Category: Preamps and Channel Strips
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Universal Audio Model: 4-710D Number of Channels: 4 Features: Headphone Output Type: Microphone Preamp
Universal Audio 4-710d 4-channel Microphone Preamplifier Features:Phase-aligned "tone blending" of tube and solid-stateNewly designed 1176-style compression/soft-limiting circuit on each mic channelMonolithic balanced output stageDual gain stagesBalanced send/return insertsDiscrete JFET DI with 2.2M ohm ultra-hi-Z impedance70dB+ of gain, +48-volt phantom power, pad (15dB), phase invert, and low-cut filter (75Hz)Front-panel hi-Z input (switched from mic/line)Rear-panel XLR mic input, XLR line input, and XLR line outputDigital output via dual ADAT optical or AES/EBU (DB-25)8 channels of high-quality 24-bit/192kHz A/D conversionThe Universal Audio 4-710d combines four 710 Twin-Finity mic pres into a single unit with A/D conversion and costs less than three original 710s combined! But that's not all. The preamps take a Class A FET preamp circuit and a completely separate Class A triode tube preamp and give you the ability to blend the two signals together to taste. While they were at it, Universal Audio also added a simple 1176-based compression section to each channel. Now it's even easier and more cost effective than ever to add a set of these fantastic hybrid preamps to your studio.Four 710 Twin-Finity mic preamps with compressionMost sound engineers know about the Universal Audio 710 Twin-Finity mic preamp — an award-winning design that's standard equipment in top studios and live rigs worldwide. The UA 4-710d features four of these bad boys and comes in well under the price of four separate 710 units. Each channel also offers UA's newly designed 1176-style compression circuit. Not only do you get top-notch-sounding preamps, but you can dial in the exact amount of compression you need to make your sound source punch through the mix.Phase-aligned "tone blending" of tube and solid-stateEach of the four mic preamp channels on the 4-710d allows for choosing between a 100% solid-state and 100% tube signal path, or any mix of the two that you desire, using a continuously variable control. Don't get stuck having to switch preamps every time you want a different sound, or worse yet, get stuck with only one sound to work with. Go from pristine to euphonic with Universal Audio's 4-710d blendable solid-state and tube signal paths.Onboard A/D conversion with digital outputsAs if the Universal Audio 4-710d doesn't do enough for your studio, the eight analog inputs are also digitized via 24-bit A/D converters up to 192kHz. Digital output is available via dual ADAT "lightpipe" or AES/EBU DB-25 connectors, giving you effortless compatibility with most popular audio interfaces. What's more, you can even input up to four other analog mic preamps through the 4-710d to access its superior A/D conversion.Tech SpecsPreamp Type HybridNumber of Channels 4Frequency Response 20Hz-20kHzPhantom Power YesCompressor YesAnalog Inputs 4 x XLR (Mic), 4 x 1/4" (Line), 4 x 1/4" (Hi-Z), 4 x 1/4" (Line - CH 5-8)Analog Outputs 4 x XLRDigital Outputs 1 x DB-25 (AES/EBU), 2 x Optical (ADAT)Clock I/O 2 x Word ClockRack Spaces 2UHeight 3.5"Depth 12"Width 19"Weight 11.5 lbs.Manufacturer Part Number 4710DD
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Universal Audio |
| Model: | 4-710D | Number of Channels: | 4 |
| Features: | Headphone Output | Type: | Microphone Preamp |
Universal Audio 4-710d 4-channel Microphone Preamplifier Features:Phase-aligned "tone blending" of tube and solid-stateNewly designed 1176-style compression/soft-limiting circuit on each mic channelMonolithic balanced output stageDual gain stagesBalanced send/return insertsDiscrete JFET DI with 2.2M ohm ultra-hi-Z impedance70dB+ of gain, +48-volt phantom power, pad (15dB), phase invert, and low-cut filter (75Hz)Front-panel hi-Z input (switched from mic/line)Rear-panel XLR mic input, XLR line input, and XLR line outputDigital output via dual ADAT optical or AES/EBU (DB-25)8 channels of high-quality 24-bit/192kHz A/D conversionThe Universal Audio 4-710d combines four 710 Twin-Finity mic pres into a single unit with A/D conversion and costs less than three original 710s combined! But that's not all. The preamps take a Class A FET preamp circuit and a completely separate Class A triode tube preamp and give you the ability to blend the two signals together to taste. While they were at it, Universal Audio also added a simple 1176-based compression section to each channel. Now it's even easier and more cost effective than ever to add a set of these fantastic hybrid preamps to your studio.Four 710 Twin-Finity mic preamps with compressionMost sound engineers know about the Universal Audio 710 Twin-Finity mic preamp — an award-winning design that's standard equipment in top studios and live rigs worldwide. The UA 4-710d features four of these bad boys and comes in well under the price of four separate 710 units. Each channel also offers UA's newly designed 1176-style compression circuit. Not only do you get top-notch-sounding preamps, but you can dial in the exact amount of compression you need to make your sound source punch through the mix.Phase-aligned "tone blending" of tube and solid-stateEach of the four mic preamp channels on the 4-710d allows for choosing between a 100% solid-state and 100% tube signal path, or any mix of the two that you desire, using a continuously variable control. Don't get stuck having to switch preamps every time you want a different sound, or worse yet, get stuck with only one sound to work with. Go from pristine to euphonic with Universal Audio's 4-710d blendable solid-state and tube signal paths.Onboard A/D conversion with digital outputsAs if the Universal Audio 4-710d doesn't do enough for your studio, the eight analog inputs are also digitized via 24-bit A/D converters up to 192kHz. Digital output is available via dual ADAT "lightpipe" or AES/EBU DB-25 connectors, giving you effortless compatibility with most popular audio interfaces. What's more, you can even input up to four other analog mic preamps through the 4-710d to access its superior A/D conversion.Tech SpecsPreamp Type HybridNumber of Channels 4Frequency Response 20Hz-20kHzPhantom Power YesCompressor YesAnalog Inputs 4 x XLR (Mic), 4 x 1/4" (Line), 4 x 1/4" (Hi-Z), 4 x 1/4" (Line - CH 5-8)Analog Outputs 4 x XLRDigital Outputs 1 x DB-25 (AES/EBU), 2 x Optical (ADAT)Clock I/O 2 x Word ClockRack Spaces 2UHeight 3.5"Depth 12"Width 19"Weight 11.5 lbs.Manufacturer Part Number 4710DD