Back to the main page Back to category CAD E350 Condenser Cable Profess
musical instrument details
CAD Equitek E-350 Microphone with original shock mount & case. Great condition!
Estimated price for orientation: 600 $
Category: CAD E350 Condenser Cable Profess
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: CAD Mount Type: None MPN: Does Not Apply Model: E350 Connectivity: Cable Design: Freestanding Connector(s): XLR Bundled Items: Shock Mount Features: Integrated Preamplifier Suited For: Studio Recording Microphone Form Factor: Handheld/Stand-Held Instrument: Voice, Music Pickup Pattern: Cardioid, Omnidirectional Country/Region of Manufacture: United States Type: Condenser Microphone
Often acclaimed as CAD's best mic, the E-350 original oval-badge model is 100% made in the USA. This E350 has been very well cared for and stored. It had modest usage in a smoke-free studio.
The cosmetic condition is very good, with some light scratches from normal use, on the lower rear side of the housing. It has NO nicks, dings or dents.An increasingly rare to find classic, the E350 rivals legendary Neumann models such as the U87 and other large-diaphragm industry studio standards.About the Conneaut Audio Equitek E-350 Large Diaphragm, Multi-Pattern Condenser MicrophoneThe Equitek E-350 was the improved version of the E-300 multi pattern condenser, offering three polar patterns, a large-diaphragm capsule, -20dB pad, and CAD’s proprietary Op-Amp “Equitek” transformerless amplifier circuitry.Whereas the E-300 featured a Made in China large-diaphragm capsule, the E-350 used a proprietary US-madecapsule which was manufactured in CAD’s Conneaut, Ohio production facility.This “Optema OS-110” capsule would be used in many of CAD’s microphones, including the VSM, dual-tube VX2, and first generation M177 and M179 (the manufacturing of which would later be outsourced to an offshore factory). It was a 33mm capsule with (in its multipattern configuration) two 28mm center-terminated diaphragms made of 3-micron high-strength polymer film.The E-350 is a rare and sought-after modern classic that rivals the industry's most distinguished and renowned professional large condenser studio microphones. For voiceover, music, studio, and live applications CAD's E-350 is legendary for its flattering character and clarity. If you've worked with an E-350 you already know this is a phenomenal microphone that captures the true essence of what you're recording with a distinctive flavor all its own.
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | CAD |
| Mount Type: | None | MPN: | Does Not Apply |
| Model: | E350 | Connectivity: | Cable |
| Design: | Freestanding | Connector(s): | XLR |
| Bundled Items: | Shock Mount | Features: | Integrated Preamplifier |
| Suited For: | Studio Recording | Microphone Form Factor: | Handheld/Stand-Held |
| Instrument: | Voice, Music | Pickup Pattern: | Cardioid, Omnidirectional |
| Country/Region of Manufacture: | United States | Type: | Condenser Microphone |
Often acclaimed as CAD's best mic, the E-350 original oval-badge model is 100% made in the USA. This E350 has been very well cared for and stored. It had modest usage in a smoke-free studio.
The cosmetic condition is very good, with some light scratches from normal use, on the lower rear side of the housing. It has NO nicks, dings or dents.An increasingly rare to find classic, the E350 rivals legendary Neumann models such as the U87 and other large-diaphragm industry studio standards.About the Conneaut Audio Equitek E-350 Large Diaphragm, Multi-Pattern Condenser MicrophoneThe Equitek E-350 was the improved version of the E-300 multi pattern condenser, offering three polar patterns, a large-diaphragm capsule, -20dB pad, and CAD’s proprietary Op-Amp “Equitek” transformerless amplifier circuitry.Whereas the E-300 featured a Made in China large-diaphragm capsule, the E-350 used a proprietary US-madecapsule which was manufactured in CAD’s Conneaut, Ohio production facility.This “Optema OS-110” capsule would be used in many of CAD’s microphones, including the VSM, dual-tube VX2, and first generation M177 and M179 (the manufacturing of which would later be outsourced to an offshore factory). It was a 33mm capsule with (in its multipattern configuration) two 28mm center-terminated diaphragms made of 3-micron high-strength polymer film.The E-350 is a rare and sought-after modern classic that rivals the industry's most distinguished and renowned professional large condenser studio microphones. For voiceover, music, studio, and live applications CAD's E-350 is legendary for its flattering character and clarity. If you've worked with an E-350 you already know this is a phenomenal microphone that captures the true essence of what you're recording with a distinctive flavor all its own.
The cosmetic condition is very good, with some light scratches from normal use, on the lower rear side of the housing. It has NO nicks, dings or dents.An increasingly rare to find classic, the E350 rivals legendary Neumann models such as the U87 and other large-diaphragm industry studio standards.About the Conneaut Audio Equitek E-350 Large Diaphragm, Multi-Pattern Condenser MicrophoneThe Equitek E-350 was the improved version of the E-300 multi pattern condenser, offering three polar patterns, a large-diaphragm capsule, -20dB pad, and CAD’s proprietary Op-Amp “Equitek” transformerless amplifier circuitry.Whereas the E-300 featured a Made in China large-diaphragm capsule, the E-350 used a proprietary US-madecapsule which was manufactured in CAD’s Conneaut, Ohio production facility.This “Optema OS-110” capsule would be used in many of CAD’s microphones, including the VSM, dual-tube VX2, and first generation M177 and M179 (the manufacturing of which would later be outsourced to an offshore factory). It was a 33mm capsule with (in its multipattern configuration) two 28mm center-terminated diaphragms made of 3-micron high-strength polymer film.The E-350 is a rare and sought-after modern classic that rivals the industry's most distinguished and renowned professional large condenser studio microphones. For voiceover, music, studio, and live applications CAD's E-350 is legendary for its flattering character and clarity. If you've worked with an E-350 you already know this is a phenomenal microphone that captures the true essence of what you're recording with a distinctive flavor all its own.