Back to the main page Back to category Microphones and Wireless Systems
musical instrument details
AKG SRA2 B/EW Active Directional UHF Antenna - BNIB - Belfield Music
Estimated price for orientation: 689 $
Category: Microphones and Wireless Systems
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: AKG MPN: SRA-2BEW Model: SRA-2BEW UPC: Does Not Apply
Product Information:CLOSER TO THE HOT SPOTfor indoor or outdoor use with long cable lengthsThe SRA2 B/EW is an active directional wide-band UHF receiving antenna for use with wireless microphone systems. It operates in a frequency range from 470MHz to 952MHz, provides a covering angle of 70° and has a built-in amplifier. With a total gain of 22dB, it compensates for long cable runs. In combination with dedicated antenna components, it works for cable lengths up to 300m and can be remotely powered through the antenna cable.The antenna has waterproof construction and can be used for indoor and outdoor applications. With the included universal thread adapter, it can be mounted on floor stands with 3/8" or 5/8" screws.
Integrated high-performance antenna booster
22dB total gain for cable lengths up to 300m (1000 ft)Remote powering via the antenna cable
eliminates any extra installation effortOperates in an ultra-wide frequency range
from 470MHz to 952MHz for universal use70° covering angle
to reduce unwanted radio signalsWater-resistant construction
to withstand extreme weather conditions
Specifications
General
Switching bandwidth (from/to) 470 to 952 MHz
Antenna gain 21.5 dBi
Covering angle 70 Grad
Antenna Output
Amount 1
Type BNC
Gender Female
Note RF output (50 Ohms)
Recommended load impedance 50 Ohms
Powering Interface
Type BNC
Voltage 8 to 8 V
Design
Body Plastic
Finish black
Dimensions / Weight
Length 240 mm
Height 230 mm
Width 26 mm
Net Weight 250 g
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | AKG |
| MPN: | SRA-2BEW | Model: | SRA-2BEW |
| UPC: | Does Not Apply |
Product Information:CLOSER TO THE HOT SPOTfor indoor or outdoor use with long cable lengthsThe SRA2 B/EW is an active directional wide-band UHF receiving antenna for use with wireless microphone systems. It operates in a frequency range from 470MHz to 952MHz, provides a covering angle of 70° and has a built-in amplifier. With a total gain of 22dB, it compensates for long cable runs. In combination with dedicated antenna components, it works for cable lengths up to 300m and can be remotely powered through the antenna cable.The antenna has waterproof construction and can be used for indoor and outdoor applications. With the included universal thread adapter, it can be mounted on floor stands with 3/8" or 5/8" screws.
Integrated high-performance antenna booster
22dB total gain for cable lengths up to 300m (1000 ft)Remote powering via the antenna cable
eliminates any extra installation effortOperates in an ultra-wide frequency range
from 470MHz to 952MHz for universal use70° covering angle
to reduce unwanted radio signalsWater-resistant construction
to withstand extreme weather conditions
Specifications
General
Switching bandwidth (from/to) 470 to 952 MHz
Antenna gain 21.5 dBi
Covering angle 70 Grad
Antenna Output
Amount 1
Type BNC
Gender Female
Note RF output (50 Ohms)
Recommended load impedance 50 Ohms
Powering Interface
Type BNC
Voltage 8 to 8 V
Design
Body Plastic
Finish black
Dimensions / Weight
Length 240 mm
Height 230 mm
Width 26 mm
Net Weight 250 g