Back to the main page Back to category FBT Vertus Cla208saw make Offer
musical instrument details
FBT Vertus CLA208SAW *MAKE OFFER* New w/ Warranty
Estimated price for orientation: 1 299 $
Category: FBT Vertus Cla208saw make Offer
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: FBT MPN: Vertus CLA208SAW UPC: Does Not Apply
FBT Vertus CLA 208SAW only. Optional Accessories Not Included.The white FBT Vertus CLA 208SAW is a 600W RMS active subwoofer with two 8" custom neodymium woofers in a bass-reflex design. It can be used to extend the low frequency response to a wide range of FBT speaker systems for applications such as live stage, theater, houses of worship, DJ setups, and more.The Vertus CLA 208SAW has several other features such as a frequency response of 50 to 180 Hz and a 600W class D power amplifier that uses a switch mode power supply. It's built-in digital signal processor has 4 available frequency presets allowing the sub to be configured to any speaker.The Vertus CLA 208SAW 15 mm birch-plywood enclosure, which has an anti-scratch paint finish, features a control-panel that has stereo combo XLR/jack inputs, a link jack, an XLR Hi-pass stereo out jack, along with volume, preset settings, 0 to 180° phase switch, and status LED indicators on the rear panel. Also built into the enclosure are 2 integrated carry handles and a M20 stand adapter. Power is supplied using a Neutrik Powerconn input and link jack or the included AC power cable.Features:Active subwoofer in bass-reflex design
15mm birch plywood enclosure
2 x 8" custom high excursion woofer with 2" voice coil
Class D 600W RMS amplifier with switch mode power
supply
DSP processor with 4 presets
Neutrik Powercon in & link
M20 stand adapter
2 integrated handles
Completely Manufactured in ItalyApplications:School and corporate audio visual sound reiforcementBackground music/announcement: Restaurants, PubsTransportation terminals, Clubs,Auditorium, Theatres,
Gyms, Houses of worshipSuitable for low frequency extension and reinforcement of the CLA 604A array, especially for live performanceSpecifications:Configuration
1Amplifier Continuous
RMS 400Max. Continuous Power
RMS 600Amplifier Max Peak
1200Frequency Response
50 Hz to 180 HzLow Frequency Driver
2x 8" (203 mm) - 2" (51 mm) coilHigh Frequency Driver
NoneMaximum Sound Pressure Level (SPL)
Continuous 125, peak 129 half-spaceDispersion
OmnidirectionalInput Impedance
22 kOhmsCrossover Frequency
0.15 kHzAC Power Requirements
450 VAInput Connectors
Stereo XLR with loop, HP outPower Cord
16.4 " (5.0 m)Dimensions
(W x H x D) 21.7 x 10.6 x 19.7" (550 x 270 x 500 mm)Weight 44.09 lb (20 kg)CONTACT US for more info, product videos, and product reviews.
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | FBT |
| MPN: | Vertus CLA208SAW | UPC: | Does Not Apply |
FBT Vertus CLA 208SAW only. Optional Accessories Not Included.The white FBT Vertus CLA 208SAW is a 600W RMS active subwoofer with two 8" custom neodymium woofers in a bass-reflex design. It can be used to extend the low frequency response to a wide range of FBT speaker systems for applications such as live stage, theater, houses of worship, DJ setups, and more.The Vertus CLA 208SAW has several other features such as a frequency response of 50 to 180 Hz and a 600W class D power amplifier that uses a switch mode power supply. It's built-in digital signal processor has 4 available frequency presets allowing the sub to be configured to any speaker.The Vertus CLA 208SAW 15 mm birch-plywood enclosure, which has an anti-scratch paint finish, features a control-panel that has stereo combo XLR/jack inputs, a link jack, an XLR Hi-pass stereo out jack, along with volume, preset settings, 0 to 180° phase switch, and status LED indicators on the rear panel. Also built into the enclosure are 2 integrated carry handles and a M20 stand adapter. Power is supplied using a Neutrik Powerconn input and link jack or the included AC power cable.Features:Active subwoofer in bass-reflex design
15mm birch plywood enclosure
2 x 8" custom high excursion woofer with 2" voice coil
Class D 600W RMS amplifier with switch mode power
supply
DSP processor with 4 presets
Neutrik Powercon in & link
M20 stand adapter
2 integrated handles
Completely Manufactured in ItalyApplications:School and corporate audio visual sound reiforcementBackground music/announcement: Restaurants, PubsTransportation terminals, Clubs,Auditorium, Theatres,
Gyms, Houses of worshipSuitable for low frequency extension and reinforcement of the CLA 604A array, especially for live performanceSpecifications:Configuration
1Amplifier Continuous
RMS 400Max. Continuous Power
RMS 600Amplifier Max Peak
1200Frequency Response
50 Hz to 180 HzLow Frequency Driver
2x 8" (203 mm) - 2" (51 mm) coilHigh Frequency Driver
NoneMaximum Sound Pressure Level (SPL)
Continuous 125, peak 129 half-spaceDispersion
OmnidirectionalInput Impedance
22 kOhmsCrossover Frequency
0.15 kHzAC Power Requirements
450 VAInput Connectors
Stereo XLR with loop, HP outPower Cord
16.4 " (5.0 m)Dimensions
(W x H x D) 21.7 x 10.6 x 19.7" (550 x 270 x 500 mm)Weight 44.09 lb (20 kg)CONTACT US for more info, product videos, and product reviews.
15mm birch plywood enclosure
2 x 8" custom high excursion woofer with 2" voice coil
Class D 600W RMS amplifier with switch mode power
supply
DSP processor with 4 presets
Neutrik Powercon in & link
M20 stand adapter
2 integrated handles
Completely Manufactured in ItalyApplications:School and corporate audio visual sound reiforcementBackground music/announcement: Restaurants, PubsTransportation terminals, Clubs,Auditorium, Theatres,
Gyms, Houses of worshipSuitable for low frequency extension and reinforcement of the CLA 604A array, especially for live performanceSpecifications:Configuration
1Amplifier Continuous
RMS 400Max. Continuous Power
RMS 600Amplifier Max Peak
1200Frequency Response
50 Hz to 180 HzLow Frequency Driver
2x 8" (203 mm) - 2" (51 mm) coilHigh Frequency Driver
NoneMaximum Sound Pressure Level (SPL)
Continuous 125, peak 129 half-spaceDispersion
OmnidirectionalInput Impedance
22 kOhmsCrossover Frequency
0.15 kHzAC Power Requirements
450 VAInput Connectors
Stereo XLR with loop, HP outPower Cord
16.4 " (5.0 m)Dimensions
(W x H x D) 21.7 x 10.6 x 19.7" (550 x 270 x 500 mm)Weight 44.09 lb (20 kg)CONTACT US for more info, product videos, and product reviews.