Back to the main page Back to category Other Guitar Effects Pedals
musical instrument details
DYNACORD L1600 POWER AMP 2X800W/4OHMS ENDSTUFE
Estimated price for orientation: 650 $
Category: Other Guitar Effects Pedals
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition
DYNACORD L1600 endstufe, gebraucht aber in gutem zustand. Original fotos. Specs;
* Max. Output Power - into 8 ohms : 2 x 560 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 4 ohms : 2 x 900 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 2 ohms : 2 x 1200 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 8 ohms bridged : 1 x 1800 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 4 ohms bridged : 1 x 2400 W at 1 kHz / THD = 1.0%
* Rated Output Power - into 8 ohms : 2 x 500 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 4 ohms : 2 x 800 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 2 ohms : 2 x 1000 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 8 ohms bridged : 1 x 1600 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 4 ohms bridged : 1 x 2000 W at 20 Hz - 20 kHz / THD = 0.1 %
* Frequency Response : 0 dB ..... -1 dB/20 Hz - 20 kHz
* Phase Angle Response : ± 30 degree/20 Hz.....20 kHz
* Maximum Output Level : 72 V / RMS before clipping, no load, ref. 1 kHz / THD = 1%
* Voltage Gain ref. 1 kHz : 26 dB (constant gain option)
* Input Sensitivity : 0 dBu/0.775 V, +6 dBu/1.55 V at rated output / 4 ohms ref. 1 kHz
* Maximum Input Level : +21 dBu / 8.7 V
* Input Impedance active balanced : 20 kohms
* THD at Rated Output : < 0.05 % MBW = 80.0 kHz, f = 1 kHz
* IMD -SMPTE : < 0.01 % 60 Hz, 7 kHz, at rated output
* Signal-to-Noise Ratio : >105 dB at rated output into 4 ohms, A-weighted,
RMS, input sensitivity +6 dBu
* Attenuation at rated output : > 70 dB f = 1 kHz
* Damping Factor internal 1 kHz : > 300
* DIM 30 : < 0.01 %
* DIM 100 : < 0.01 %
* Slew Rate internal : > 35 V / ?s
* Power Consumption : 1100 W 1/8 rated output into 4 ohms
* Width : 483 mm
* Height : 132.5 mm
* Depth : 426 mm
* Weight : 27 kg
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition |
DYNACORD L1600 endstufe, gebraucht aber in gutem zustand. Original fotos. Specs;
* Max. Output Power - into 8 ohms : 2 x 560 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 4 ohms : 2 x 900 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 2 ohms : 2 x 1200 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 8 ohms bridged : 1 x 1800 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 4 ohms bridged : 1 x 2400 W at 1 kHz / THD = 1.0%
* Rated Output Power - into 8 ohms : 2 x 500 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 4 ohms : 2 x 800 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 2 ohms : 2 x 1000 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 8 ohms bridged : 1 x 1600 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 4 ohms bridged : 1 x 2000 W at 20 Hz - 20 kHz / THD = 0.1 %
* Frequency Response : 0 dB ..... -1 dB/20 Hz - 20 kHz
* Phase Angle Response : ± 30 degree/20 Hz.....20 kHz
* Maximum Output Level : 72 V / RMS before clipping, no load, ref. 1 kHz / THD = 1%
* Voltage Gain ref. 1 kHz : 26 dB (constant gain option)
* Input Sensitivity : 0 dBu/0.775 V, +6 dBu/1.55 V at rated output / 4 ohms ref. 1 kHz
* Maximum Input Level : +21 dBu / 8.7 V
* Input Impedance active balanced : 20 kohms
* THD at Rated Output : < 0.05 % MBW = 80.0 kHz, f = 1 kHz
* IMD -SMPTE : < 0.01 % 60 Hz, 7 kHz, at rated output
* Signal-to-Noise Ratio : >105 dB at rated output into 4 ohms, A-weighted,
RMS, input sensitivity +6 dBu
* Attenuation at rated output : > 70 dB f = 1 kHz
* Damping Factor internal 1 kHz : > 300
* DIM 30 : < 0.01 %
* DIM 100 : < 0.01 %
* Slew Rate internal : > 35 V / ?s
* Power Consumption : 1100 W 1/8 rated output into 4 ohms
* Width : 483 mm
* Height : 132.5 mm
* Depth : 426 mm
* Weight : 27 kg
* Max. Output Power - into 8 ohms : 2 x 560 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 4 ohms : 2 x 900 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 2 ohms : 2 x 1200 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 8 ohms bridged : 1 x 1800 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 4 ohms bridged : 1 x 2400 W at 1 kHz / THD = 1.0%
* Rated Output Power - into 8 ohms : 2 x 500 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 4 ohms : 2 x 800 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 2 ohms : 2 x 1000 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 8 ohms bridged : 1 x 1600 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 4 ohms bridged : 1 x 2000 W at 20 Hz - 20 kHz / THD = 0.1 %
* Frequency Response : 0 dB ..... -1 dB/20 Hz - 20 kHz
* Phase Angle Response : ± 30 degree/20 Hz.....20 kHz
* Maximum Output Level : 72 V / RMS before clipping, no load, ref. 1 kHz / THD = 1%
* Voltage Gain ref. 1 kHz : 26 dB (constant gain option)
* Input Sensitivity : 0 dBu/0.775 V, +6 dBu/1.55 V at rated output / 4 ohms ref. 1 kHz
* Maximum Input Level : +21 dBu / 8.7 V
* Input Impedance active balanced : 20 kohms
* THD at Rated Output : < 0.05 % MBW = 80.0 kHz, f = 1 kHz
* IMD -SMPTE : < 0.01 % 60 Hz, 7 kHz, at rated output
* Signal-to-Noise Ratio : >105 dB at rated output into 4 ohms, A-weighted,
RMS, input sensitivity +6 dBu
* Attenuation at rated output : > 70 dB f = 1 kHz
* Damping Factor internal 1 kHz : > 300
* DIM 30 : < 0.01 %
* DIM 100 : < 0.01 %
* Slew Rate internal : > 35 V / ?s
* Power Consumption : 1100 W 1/8 rated output into 4 ohms
* Width : 483 mm
* Height : 132.5 mm
* Depth : 426 mm
* Weight : 27 kg