Back to the main page Back to category Delay Echo and Reverb
musical instrument details
Analogman ardx20 and Amaze0
Estimated price for orientation: 600 $
Category: Delay Echo and Reverb
Class:
Description Brand: Analogman Model: ARDX20 and AMAZE0 To Fit: Electric Guitar Country/Region of Manufacture: United States Type: Delay Analog/Digital: Analog
TAP TEMPO MODE:
To change the tap note type, hold down the right button and it will scroll through Quarter (normal), Eighth (double speed), and Dotted eighth note (Floyd/U2 etc) settings.
Tap the right button to enter the delay time. The delay time is shown on the top right, the tapped time is shown on the bottom left (same if Quarter selected).Pressing the left button turns modulation on (see ^v in top left) or off (see --- on top left).
When modulation is on, you can adjust it with the two knobs.
Left knob is modulation speed, 1 through 10, 10 is fastest.
You will see the top left figure ^v move in the speed that is set.
The right knob is used for MODULATION TYPE.
Modulation type 1-5 are normal up/down smooth sine wave modulation, 1 is mildest and 5 is the deepest setting.
Modulation type 6-10 are the TAPE DELAY SIMULATION, a random WARBLE type modulation, 10 is the deepest. This simulates the variances in delay time on a tape delay due to capstan and roller imperfections, tape snags, and other random events. PROGRAM MODE:To go to PROGRAM MODE, hold down the left button.You will see [P:X] where X is the selected program number.
The delay time and modulation type and speed for that program will be displayed.
Press the left button to toggle modulation on (^v in top left) and off (--).
Press the right button to scroll through the presets: P1 through P8,
and P0 which is used for setting the delay time manually with the right knob
and the modulation type AND speed manually with the left knob.
Each program can be edited for delay time and modulation speed and type.
To go to Tap Tempo mode from Program mode, hold the left button.FEATURES:Two expression pedal jacks. Optionally plugging an expression pedal into either of the two center jacks will control the knob closest to that jack remotely. The jack on the right can be used optionally with a dual remote footswitch like the
Boss FS-6, which will work just like the two switches on the AMAZE0. This allows remote control of the AMAZEO or MIDI control of tap tempo, etc. You can also use this jack as a TAP TEMPO OUTPUT to sync to other pedals. The tip will be the right (tap tempo) switch and the ring is the left switch which you don't need to use. Size : 4.5" wide x 3.5" deep x 2" tallRequires stereo cable to connect to analog delay (Not a Y-Cable)Runs off normal Boss 9V power supply. Do not use a power cable without ground connection.Uses about 30mA of power, best to give it an isolated power cable from Voodoo Labs, T Rex, etc power supply. I don't like to share power with digital devices but you can if you need to.
Description
| Brand: | Analogman | Model: | ARDX20 and AMAZE0 |
| To Fit: | Electric Guitar | Country/Region of Manufacture: | United States |
| Type: | Delay | Analog/Digital: | Analog |
TAP TEMPO MODE:
To change the tap note type, hold down the right button and it will scroll through Quarter (normal), Eighth (double speed), and Dotted eighth note (Floyd/U2 etc) settings.
Tap the right button to enter the delay time. The delay time is shown on the top right, the tapped time is shown on the bottom left (same if Quarter selected).
Boss FS-6, which will work just like the two switches on the AMAZE0. This allows remote control of the AMAZEO or MIDI control of tap tempo, etc. You can also use this jack as a TAP TEMPO OUTPUT to sync to other pedals. The tip will be the right (tap tempo) switch and the ring is the left switch which you don't need to use. Size : 4.5" wide x 3.5" deep x 2" tallRequires stereo cable to connect to analog delay (Not a Y-Cable)Runs off normal Boss 9V power supply. Do not use a power cable without ground connection.Uses about 30mA of power, best to give it an isolated power cable from Voodoo Labs, T Rex, etc power supply. I don't like to share power with digital devices but you can if you need to.
To change the tap note type, hold down the right button and it will scroll through Quarter (normal), Eighth (double speed), and Dotted eighth note (Floyd/U2 etc) settings.
Tap the right button to enter the delay time. The delay time is shown on the top right, the tapped time is shown on the bottom left (same if Quarter selected).
Pressing the left button turns modulation on (see ^v in top left) or off (see --- on top left).
When modulation is on, you can adjust it with the two knobs.
Left knob is modulation speed, 1 through 10, 10 is fastest.
You will see the top left figure ^v move in the speed that is set.
The right knob is used for MODULATION TYPE.
Modulation type 1-5 are normal up/down smooth sine wave modulation, 1 is mildest and 5 is the deepest setting.
Modulation type 6-10 are the TAPE DELAY SIMULATION, a random WARBLE type modulation, 10 is the deepest. This simulates the variances in delay time on a tape delay due to capstan and roller imperfections, tape snags, and other random events. PROGRAM MODE:To go to PROGRAM MODE, hold down the left button.You will see [P:X] where X is the selected program number.
The delay time and modulation type and speed for that program will be displayed.
Press the left button to toggle modulation on (^v in top left) and off (--).
Press the right button to scroll through the presets: P1 through P8,
and P0 which is used for setting the delay time manually with the right knob
and the modulation type AND speed manually with the left knob.
Each program can be edited for delay time and modulation speed and type.
To go to Tap Tempo mode from Program mode, hold the left button.
FEATURES:Two expression pedal jacks. Optionally plugging an expression pedal into either of the two center jacks will control the knob closest to that jack remotely. The jack on the right can be used optionally with a dual remote footswitch like the When modulation is on, you can adjust it with the two knobs.
Left knob is modulation speed, 1 through 10, 10 is fastest.
You will see the top left figure ^v move in the speed that is set.
The right knob is used for MODULATION TYPE.
Modulation type 1-5 are normal up/down smooth sine wave modulation, 1 is mildest and 5 is the deepest setting.
Modulation type 6-10 are the TAPE DELAY SIMULATION, a random WARBLE type modulation, 10 is the deepest. This simulates the variances in delay time on a tape delay due to capstan and roller imperfections, tape snags, and other random events. PROGRAM MODE:To go to PROGRAM MODE, hold down the left button.You will see [P:X] where X is the selected program number.
The delay time and modulation type and speed for that program will be displayed.
Press the left button to toggle modulation on (^v in top left) and off (--).
Press the right button to scroll through the presets: P1 through P8,
and P0 which is used for setting the delay time manually with the right knob
and the modulation type AND speed manually with the left knob.
Each program can be edited for delay time and modulation speed and type.
To go to Tap Tempo mode from Program mode, hold the left button.
Boss FS-6, which will work just like the two switches on the AMAZE0. This allows remote control of the AMAZEO or MIDI control of tap tempo, etc. You can also use this jack as a TAP TEMPO OUTPUT to sync to other pedals. The tip will be the right (tap tempo) switch and the ring is the left switch which you don't need to use. Size : 4.5" wide x 3.5" deep x 2" tallRequires stereo cable to connect to analog delay (Not a Y-Cable)Runs off normal Boss 9V power supply. Do not use a power cable without ground connection.Uses about 30mA of power, best to give it an isolated power cable from Voodoo Labs, T Rex, etc power supply. I don't like to share power with digital devices but you can if you need to.