Back to the main page Back to category Rane Ttm57 MKII TTM 57mkii Serat
musical instrument details
RANE TTM57MKII Professional DJ Mixer! Disc Jockey (Brand New In Box)!!!
Estimated price for orientation: 2 400 $
Category: Rane Ttm57 MKII TTM 57mkii Serat
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Rane MPN: Does Not Apply Model: TTM57MKII UPC: Does not apply
Two Deck Bus ControlsEach bus selects USB Port A or B computer playback, a Phono / CD deck input, or an Aux line-level input.Gain trim and metering.Sweepable Low / High-pass effect Filter.3-band full-cut tone controls:Kill switches are momentary on/off.Press SHIFT and a Kill to latch it on.Direct Serato Deck ControlsSoftware FX on/off button.FX knob parameter adjustment:Turn to scroll through FX.Press to select the FX.Hold SHIFT to change the Beats parameter.LOOP knob selects the loop length.Press it to engage Auto Loop.Hold down ROLL for Loop Roll.LIBRARY knob scrolls songs or crates: Press to load a song or crate.Hold SHIFT to tab between song and crate selection.TRANSFORM joystick:Press for Transform on/off.Transform on: any direction cuts the audio.Transform off: multifunction software control (gray text).Trigger Serato DJ Cues and SamplesCUES / SAMPLES button toggles between Cues and Samples.The button is lit when Cues are active.Four Cues per Deck. The active USB follows the Deck source selection. Lit button colors match the Cue colors in Serato DJ software.Press an un-lit button to create a new Cue. Hold SHIFT to delete a Cue.Six Sample triggers and Bank select buttons (Bank up and Bank down). A lit button indicates a ready-to-play sample in Serato DJ.The USB Aux Input is usually from the Serato SP-6 sample player, with it's own Level control, Low / High-pass sweep Filter and headphone cue. The USB Cue overrides any Deck Cue when it's on.Dual USB Ports for Simple DJ ChangeoverWith a computer plugged into each USB port, simply switch a mixer Deck selector to USB A or USB B and audio and MIDI are assigned. Seamlessly switch from one DJ to the next using Serato DJ or other 3rd-party audio software.Each port can stream 20 channels of low-latency audio at 44.1, 48, or 96 kHz.A typical setup includes two Serato DVS decks, software FX through independent USB digital inserts for each Deck, and the SP-6 sample player on its own USB Aux input.Deck Cue, Pan, and Split CueThe Cue slider cues Deck 1 or Deck 2 by moving the slider accordingly. This lets you adjust a Deck volume in the headphones without raising the Deck Gain control.When Split Cue is off, the Cue / Main Pan knob balances how much stereo cue and stereo main mix you hear in the headphones. When Split Cue is on, the Cued Deck goes to the left headphone cup and the Main mix goes to the right cup. The Cue / Main Pan knob balances how much Cue (left) and Main (right) is heard in the headphones. TTM57mkII Unique FeaturesDurable Lexan faceplate (no paint to wear off)Channel High, Mid, and Low Kill switchesFilter Resonance adjustmentMIDI-mappable footswitch jack to any parameterSP-6 Sampler Input Filter controlSP-6 Sampler Input Headphone CueHeadphone Split Cue Mode (Cue in the left ear and Main Mix in the right ear.)Changeable EQ crossover pointsTransform Joysticks with extra up/down/left/right functionsEasy access to Serato deck INT modeSlip ON/OFF quick controlsScroll access through all Serato DJ-FXAdjustable Serato DJ-FX Wet/Dry controlsSession Output with a Volume ControlExternal effects processor loop with +4 & -10 level switchUp-fader Channel Swap switchMagnetic Crossfader and Channel FadersThe proprietary Rane magnetic faders are fast, accurate, and long lasting.The design uses non-contact technology previously reserved for demanding aerospace and industrial applications. No travel noise—no bleed—ever.Rane's magnetic faders accurately translate hand motion into precise audio level control. Non-contact fader technology is the only way to fully address the needs of the professional performance DJ.Both channel faders and the crossfader are magnetic. These faders are easy to clean, and with proper maintenance, should last the life of the mixer. Should one become damaged, you can easily replace it. All three faders are interchangeable. Class Compliant Dual USB PortsDual USB ports provide simultaneous connection of two computers, enabling back-to-back sets between laptop DJs running different software without compromise or interruption—no easy feat.The USB ports are 100% class compliant, allowing hook-up to any Mac OS X device without the need for an additional driver.The included high-performance ASIO driver runs most Windows DAW and DJ software. Get it from the Downloads tab on this page.MIDI end points are class-compliant with both OS X and Windows devices.Serato DJ softwareDJs currently using Serato Scratch Live with supported Rane hardware have the option to migrate to the new and improved Serato DJ.Serato DJ provides support for DVS (digital vinyl system), iZotope FX, Sync, Slip Mode, more Cue points, jump-to-loop, an improved 24-slot sampler and takes advantage of the high performance, ultra-low latency Rane ASIO and Core Audio drivers. Both programs share compatible song libraries, the same general workflow and deck layout.You can have both programs installed, and use one or the other. You can also use the included Core Audio and ASIO drivers to run any other popular DJ and DAW software program you like.Virtual DJ Native SupportThis DJ product has Virtual DJ native support, with most software controls MIDI-mapped to Rane Mixer controls. Pre-defined audio configurations are included for the Rane SL2, SL3, and SL4. Tap into the full powers of your Rane Mixer with audio, video, and DVS timecode plug & play in Virtual DJ.
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Rane |
| MPN: | Does Not Apply | Model: | TTM57MKII |
| UPC: | Does not apply |
Two Deck Bus ControlsEach bus selects USB Port A or B computer playback, a Phono / CD deck input, or an Aux line-level input.Gain trim and metering.Sweepable Low / High-pass effect Filter.3-band full-cut tone controls:Kill switches are momentary on/off.Press SHIFT and a Kill to latch it on.
Direct Serato Deck ControlsSoftware FX on/off button.FX knob parameter adjustment:Turn to scroll through FX.Press to select the FX.Hold SHIFT to change the Beats parameter.LOOP knob selects the loop length.Press it to engage Auto Loop.Hold down ROLL for Loop Roll.LIBRARY knob scrolls songs or crates: Press to load a song or crate.Hold SHIFT to tab between song and crate selection.TRANSFORM joystick:Press for Transform on/off.Transform on: any direction cuts the audio.Transform off: multifunction software control (gray text).
Trigger Serato DJ Cues and SamplesCUES / SAMPLES button toggles between Cues and Samples.The button is lit when Cues are active.Four Cues per Deck. The active USB follows the Deck source selection. Lit button colors match the Cue colors in Serato DJ software.Press an un-lit button to create a new Cue. Hold SHIFT to delete a Cue.Six Sample triggers and Bank select buttons (Bank up and Bank down). A lit button indicates a ready-to-play sample in Serato DJ.The USB Aux Input is usually from the Serato SP-6 sample player, with it's own Level control, Low / High-pass sweep Filter and headphone cue. The USB Cue overrides any Deck Cue when it's on.
Dual USB Ports for Simple DJ ChangeoverWith a computer plugged into each USB port, simply switch a mixer Deck selector to USB A or USB B and audio and MIDI are assigned. Seamlessly switch from one DJ to the next using Serato DJ or other 3rd-party audio software.Each port can stream 20 channels of low-latency audio at 44.1, 48, or 96 kHz.A typical setup includes two Serato DVS decks, software FX through independent USB digital inserts for each Deck, and the SP-6 sample player on its own USB Aux input.
Deck Cue, Pan, and Split CueThe Cue slider cues Deck 1 or Deck 2 by moving the slider accordingly. This lets you adjust a Deck volume in the headphones without raising the Deck Gain control.When Split Cue is off, the Cue / Main Pan knob balances how much stereo cue and stereo main mix you hear in the headphones. When Split Cue is on, the Cued Deck goes to the left headphone cup and the Main mix goes to the right cup. The Cue / Main Pan knob balances how much Cue (left) and Main (right) is heard in the headphones.
TTM57mkII Unique FeaturesDurable Lexan faceplate (no paint to wear off)Channel High, Mid, and Low Kill switchesFilter Resonance adjustmentMIDI-mappable footswitch jack to any parameterSP-6 Sampler Input Filter controlSP-6 Sampler Input Headphone CueHeadphone Split Cue Mode (Cue in the left ear and Main Mix in the right ear.)Changeable EQ crossover pointsTransform Joysticks with extra up/down/left/right functionsEasy access to Serato deck INT modeSlip ON/OFF quick controlsScroll access through all Serato DJ-FXAdjustable Serato DJ-FX Wet/Dry controlsSession Output with a Volume ControlExternal effects processor loop with +4 & -10 level switchUp-fader Channel Swap switch
Magnetic Crossfader and Channel FadersThe proprietary Rane magnetic faders are fast, accurate, and long lasting.The design uses non-contact technology previously reserved for demanding aerospace and industrial applications. No travel noise—no bleed—ever.Rane's magnetic faders accurately translate hand motion into precise audio level control. Non-contact fader technology is the only way to fully address the needs of the professional performance DJ.Both channel faders and the crossfader are magnetic. These faders are easy to clean, and with proper maintenance, should last the life of the mixer. Should one become damaged, you can easily replace it. All three faders are interchangeable.
Class Compliant Dual USB PortsDual USB ports provide simultaneous connection of two computers, enabling back-to-back sets between laptop DJs running different software without compromise or interruption—no easy feat.The USB ports are 100% class compliant, allowing hook-up to any Mac OS X device without the need for an additional driver.The included high-performance ASIO driver runs most Windows DAW and DJ software. Get it from the Downloads tab on this page.MIDI end points are class-compliant with both OS X and Windows devices.
Serato DJ softwareDJs currently using Serato Scratch Live with supported Rane hardware have the option to migrate to the new and improved Serato DJ.Serato DJ provides support for DVS (digital vinyl system), iZotope FX, Sync, Slip Mode, more Cue points, jump-to-loop, an improved 24-slot sampler and takes advantage of the high performance, ultra-low latency Rane ASIO and Core Audio drivers. Both programs share compatible song libraries, the same general workflow and deck layout.You can have both programs installed, and use one or the other. You can also use the included Core Audio and ASIO drivers to run any other popular DJ and DAW software program you like.
Virtual DJ Native SupportThis DJ product has Virtual DJ native support, with most software controls MIDI-mapped to Rane Mixer controls. Pre-defined audio configurations are included for the Rane SL2, SL3, and SL4. Tap into the full powers of your Rane Mixer with audio, video, and DVS timecode plug & play in Virtual DJ.