Back to the main page Back to category Martin Standard D45 Acoustic Gui
musical instrument details
Martin D-45 1984 Vintage Standard Series Acoustic Guitar w/ undersaddle pickup
Estimated price for orientation: 3 480 $
Category: Martin Standard D45 Acoustic Gui
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Martin String Configuration: 6 String Series: Standard Model Year: 1984 Model: D-45 Body Material: Rosewood Body Type: Dreadnought Soundboard Style: Flat Top Size: Full Size Country/Region of Manufacture: United States Dexterity: Right-Handed
This guitar and the original hard shell care are both in very good condition. It has been played but shows only minimal evidence of it. The guitar is setup with a low action and plays very comfortably up and down the neck with the full, rich tone expected of a D-45. There is no fret buzz with this string gauge and setup parameters. Top：Solid Sitka Spruce.Back Material：Solid East Indian RosewoodSide Material：Solid East Indian RosewoodNeck Material：Select HardwoodFingerboard Material：Solid Black EbonyScale Length：25.4"（645.2mm）Nut width: 1 11/16 inch ( 42.5mm), All string heights at first fret .005 inches, no open string buzzHeight of strings at 12 frets : 1st string - 5/64th inch (1.98mm) , 6th String - 3/32nds inch (2.38mm)Neck relief at 7th fret (first and 12 frets capo'ed), .007 inchesStrings are Martin medium uncoated phosphor bronze, .013 to .056 inches diameterThere is an under saddle peizo transducer installed and wired to a 1/4 inch output jack. The finish around the around the input jack is not chipped.There is one ding on the top, and the photo shows that it goes through the finish but did not damage the underlying wood. There were binding repairs on the neck and top but none of the binding material (abalone shell etc) was lost and all was restored to the original condition. - There was minimal finish chipping where the binding originally broke away from the body. - There is a 1/32 inch gap in the binding on the back under the neck heel where the binding shrunk a bit before being repaired. There is a small area of surface finish cracks on the back due to temperature variations. They do not extend through the wood. There are some shallow surface scratches on the back. The ding on the top, the small gap in the binding, and some chipped finish on the neck binding is visible in the attached photos if you look closely. The finish cracks and shallow scratches are too subtle and small to see even with the naked eye.
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Martin |
| String Configuration: | 6 String | Series: | Standard |
| Model Year: | 1984 | Model: | D-45 |
| Body Material: | Rosewood | Body Type: | Dreadnought |
| Soundboard Style: | Flat Top | Size: | Full Size |
| Country/Region of Manufacture: | United States | Dexterity: | Right-Handed |
This guitar and the original hard shell care are both in very good condition. It has been played but shows only minimal evidence of it. The guitar is setup with a low action and plays very comfortably up and down the neck with the full, rich tone expected of a D-45. There is no fret buzz with this string gauge and setup parameters. Top：Solid Sitka Spruce.Back Material：Solid East Indian RosewoodSide Material：Solid East Indian RosewoodNeck Material：Select HardwoodFingerboard Material：Solid Black EbonyScale Length：25.4"（645.2mm）Nut width: 1 11/16 inch ( 42.5mm), All string heights at first fret .005 inches, no open string buzzHeight of strings at 12 frets : 1st string - 5/64th inch (1.98mm) , 6th String - 3/32nds inch (2.38mm)Neck relief at 7th fret (first and 12 frets capo'ed), .007 inchesStrings are Martin medium uncoated phosphor bronze, .013 to .056 inches diameterThere is an under saddle peizo transducer installed and wired to a 1/4 inch output jack. The finish around the around the input jack is not chipped.There is one ding on the top, and the photo shows that it goes through the finish but did not damage the underlying wood. There were binding repairs on the neck and top but none of the binding material (abalone shell etc) was lost and all was restored to the original condition. - There was minimal finish chipping where the binding originally broke away from the body. - There is a 1/32 inch gap in the binding on the back under the neck heel where the binding shrunk a bit before being repaired. There is a small area of surface finish cracks on the back due to temperature variations. They do not extend through the wood. There are some shallow surface scratches on the back. The ding on the top, the small gap in the binding, and some chipped finish on the neck binding is visible in the attached photos if you look closely. The finish cracks and shallow scratches are too subtle and small to see even with the naked eye.