Back to the main page Back to category Neumann TLM103 Condenser Cable P
musical instrument details
Neumann TLM103 Cardioid Condenser Mic w/ SG1 Shockmount and Wooden Case
Estimated price for orientation: 939 $
Category: Neumann TLM103 Condenser Cable P
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Neumann Type: Condenser Microphone MPN: NEUTLM103ANN, 8430, tlm103mt Mount Type: None Connectivity: Cable Model: TLM103 Connector(s): XLR 3 Pin Design: Freestanding Features: Noise-Cancelling Bundled Items: Carry Case/Bag, Clip Holder Microphone Form Factor: Handheld/Stand-Held Suited For: Recording Pickup Pattern: Cardioid Polar Pattern: Cardioid UPC: 615104084308
Neumann TLM103 Cardioid Condenser Mic (Nickel)w/ SG1 Shockmount and Wooden CaseThe TLM 103 is the ideal large diaphragm microphone for all professional and semi-professional applications requiring the utmost in sound quality on a limited budget. By utilizing the tried and true transformerless circuit found in numerous Neumann microphones, the TLM 103 features yet unattained low self-noise and the highest sound pressure level transmission. The capsule, derived from that used in the U 87, has a cardioid pattern, is acoustically well-balanced and provides extraordinary attenuation of signals from the rear. Main Features:
• Large diaphragm cardioid microphone
• Pressure gradient transducer with with one-diaphragm capsule
• Transformerless circuitry
• Extremely low noise: 7 dB-A
• Includes swivel mount
• Straightforward handling for homerecording and professional studios
• High-quality professional equipment for limited budgets
Specifications:
• Acoustical operating principle: Pressure gradient transducer
• Directional pattern: Cardioid
• Frequency range: 20 Hz - 20 kHz
• Sensitivity at 1 kHz into 1 kohm: 23 mV/Pa
• Rated impedance: 50 ohms
• Rated load impedance: 1000 ohms
• Equivalent SPL CCIR 468-3: 17.5 dB
• Equivalent SPL DIN/IEC 651: 7 dB-A
• S/N ratio CCIR 468-3: 76.5 dB
• S/N ratio DIN/IEC 651: 87 dB
• Maximum SPL for THD 0.5%: 138 dB
• Maximum output voltage: 13 dBu
• Dynamic range of the microphone amplifier DIN/IEC 651: 131 dB
• Supply voltage: 48 V ± 4 V
• Current consumption: 3 mA
• Matching connector: XLR 3F
• Weight: 1.1 lb (500 g)
• Length: 5.25” (132 mm)Wooden box and SG1 Swivel Stand Mount included. Shipping to the Lower 48 States is $10.00.
Description
Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Neumann |
Type: | Condenser Microphone | MPN: | NEUTLM103ANN, 8430, tlm103mt |
Mount Type: | None | Connectivity: | Cable |
Model: | TLM103 | Connector(s): | XLR 3 Pin |
Design: | Freestanding | Features: | Noise-Cancelling |
Bundled Items: | Carry Case/Bag, Clip Holder | Microphone Form Factor: | Handheld/Stand-Held |
Suited For: | Recording | Pickup Pattern: | Cardioid |
Polar Pattern: | Cardioid | UPC: | 615104084308 |
Neumann TLM103 Cardioid Condenser Mic (Nickel)w/ SG1 Shockmount and Wooden CaseThe TLM 103 is the ideal large diaphragm microphone for all professional and semi-professional applications requiring the utmost in sound quality on a limited budget. By utilizing the tried and true transformerless circuit found in numerous Neumann microphones, the TLM 103 features yet unattained low self-noise and the highest sound pressure level transmission. The capsule, derived from that used in the U 87, has a cardioid pattern, is acoustically well-balanced and provides extraordinary attenuation of signals from the rear. Main Features:
• Large diaphragm cardioid microphone
• Pressure gradient transducer with with one-diaphragm capsule
• Transformerless circuitry
• Extremely low noise: 7 dB-A
• Includes swivel mount
• Straightforward handling for homerecording and professional studios
• High-quality professional equipment for limited budgets
Specifications:
• Acoustical operating principle: Pressure gradient transducer
• Directional pattern: Cardioid
• Frequency range: 20 Hz - 20 kHz
• Sensitivity at 1 kHz into 1 kohm: 23 mV/Pa
• Rated impedance: 50 ohms
• Rated load impedance: 1000 ohms
• Equivalent SPL CCIR 468-3: 17.5 dB
• Equivalent SPL DIN/IEC 651: 7 dB-A
• S/N ratio CCIR 468-3: 76.5 dB
• S/N ratio DIN/IEC 651: 87 dB
• Maximum SPL for THD 0.5%: 138 dB
• Maximum output voltage: 13 dBu
• Dynamic range of the microphone amplifier DIN/IEC 651: 131 dB
• Supply voltage: 48 V ± 4 V
• Current consumption: 3 mA
• Matching connector: XLR 3F
• Weight: 1.1 lb (500 g)
• Length: 5.25” (132 mm)Wooden box and SG1 Swivel Stand Mount included. Shipping to the Lower 48 States is $10.00.
• Large diaphragm cardioid microphone
• Pressure gradient transducer with with one-diaphragm capsule
• Transformerless circuitry
• Extremely low noise: 7 dB-A
• Includes swivel mount
• Straightforward handling for homerecording and professional studios
• High-quality professional equipment for limited budgets
Specifications:
• Acoustical operating principle: Pressure gradient transducer
• Directional pattern: Cardioid
• Frequency range: 20 Hz - 20 kHz
• Sensitivity at 1 kHz into 1 kohm: 23 mV/Pa
• Rated impedance: 50 ohms
• Rated load impedance: 1000 ohms
• Equivalent SPL CCIR 468-3: 17.5 dB
• Equivalent SPL DIN/IEC 651: 7 dB-A
• S/N ratio CCIR 468-3: 76.5 dB
• S/N ratio DIN/IEC 651: 87 dB
• Maximum SPL for THD 0.5%: 138 dB
• Maximum output voltage: 13 dBu
• Dynamic range of the microphone amplifier DIN/IEC 651: 131 dB
• Supply voltage: 48 V ± 4 V
• Current consumption: 3 mA
• Matching connector: XLR 3F
• Weight: 1.1 lb (500 g)
• Length: 5.25” (132 mm)Wooden box and SG1 Swivel Stand Mount included. Shipping to the Lower 48 States is $10.00.