Back to the main page Back to category Amplifiers
musical instrument details
Amcron MA2401
Estimated price for orientation: 546 $
Category: Amplifiers
Class:
Description Brand: Amcron Rack Mountable: Yes Model: MA2401 MPN: Does Not Apply EAN: Does not apply
robbc@cloudone.net
0121-333-7711 International shipping possible worldwide, please contact us for a quote. A preloved/used Amcron Macro Tech 2401 amplifier in good condition that will be supplied after being checked, serviced and PAT tested. This unit is actually manufactured by Crown; Amcron was their imprint for shipping to the UK. The only difference is the badge. Macro-Tech amplifiers are designed to provide enormous levels of pure, undistorted power in a rugged low-profile package— making them the choice for pro sound reinforcement. They utilize our patented ODEP® protection circuitry to keep the show going long after other amplifiers have shut down. Manufacturer’s specifications:- Frequency Response: ±0.1dB from 20 Hz to 20 kHz at 1 Watt. Phase Response: ±10° from 10 Hz to 20 kHz at 1 Watt. Signal to Noise Ratio: A-weighted, better than 105 dB below full rated output. Better than 100 dB below full rated output from 20 Hz to 20 kHz. Total Harmonic Distortion (THD): <0.05% from 20 Hz to 1 kHz, increasing linearly to 0.1% at 20 kHz at 500W. I.M. Distortion: <0.05% from less than 164 milliwatts to 520 W at 26 dB gain. Slew Rate: >13V per microsecond. (Slew rates are limited to useful levels for ultrasonic/RF protection.) Damping Factor: >1000 from 10 Hz to 400 Hz. DC Offset: <10 millivolts. Input Impedance: Nominally 20K ohms balanced; 10K ohms unbalanced. Output Impedance: <10 milliohms in series with <2 microhenries. Input Connectors: Balanced 1/4 inch phone jacks. Balanced female XLR connector for each channel on the standard P.I.P.-FX module. Output Connectors: Color-coded 5-way binding posts on 3/4 inch centers; spaced 3/4 inch apart. Front Panel Controls: A front panel push button switch used to power the amplifier on and off. A detented front panel rotary potentiometer for each channel used to control the output level. Back Panel Controls: A three-position switch which selects Stereo, Bridge-Mono, or Parallel-Mono mode. A ground lift switch used to isolate the phone jack input grounds from the chassis (AC) ground. Internal Controls: A three-position switch located inside the P.I.P compartment selects 0.775V, 1.4V, or 26 dB voltage gain input sensitivity. Mounting: Standard EIA 310 front-panel rack mount with supports for supplemental rear corner mounting. If you have any questions or require any further information please call 0121-333-7711 or via email to For more information on this and other new and used products available from Cloud One please feel free to visit our website. POSTAGE AND SHIPPING £25.00 International shipping possible worldwide, please contact us for a quote. RETURNS POLICY Should you be unhappy with your purchase or have any issues with your item then please contact us within 14 days of purchase.robbc@cloudone.net
0121-333-7711
Description
| Brand: | Amcron | Rack Mountable: | Yes |
| Model: | MA2401 | MPN: | Does Not Apply |
| EAN: | Does not apply |
robbc@cloudone.net
0121-333-7711 International shipping possible worldwide, please contact us for a quote. A preloved/used Amcron Macro Tech 2401 amplifier in good condition that will be supplied after being checked, serviced and PAT tested. This unit is actually manufactured by Crown; Amcron was their imprint for shipping to the UK. The only difference is the badge. Macro-Tech amplifiers are designed to provide enormous levels of pure, undistorted power in a rugged low-profile package— making them the choice for pro sound reinforcement. They utilize our patented ODEP® protection circuitry to keep the show going long after other amplifiers have shut down. Manufacturer’s specifications:- Frequency Response: ±0.1dB from 20 Hz to 20 kHz at 1 Watt. Phase Response: ±10° from 10 Hz to 20 kHz at 1 Watt. Signal to Noise Ratio: A-weighted, better than 105 dB below full rated output. Better than 100 dB below full rated output from 20 Hz to 20 kHz. Total Harmonic Distortion (THD): <0.05% from 20 Hz to 1 kHz, increasing linearly to 0.1% at 20 kHz at 500W. I.M. Distortion: <0.05% from less than 164 milliwatts to 520 W at 26 dB gain. Slew Rate: >13V per microsecond. (Slew rates are limited to useful levels for ultrasonic/RF protection.) Damping Factor: >1000 from 10 Hz to 400 Hz. DC Offset: <10 millivolts. Input Impedance: Nominally 20K ohms balanced; 10K ohms unbalanced. Output Impedance: <10 milliohms in series with <2 microhenries. Input Connectors: Balanced 1/4 inch phone jacks. Balanced female XLR connector for each channel on the standard P.I.P.-FX module. Output Connectors: Color-coded 5-way binding posts on 3/4 inch centers; spaced 3/4 inch apart. Front Panel Controls: A front panel push button switch used to power the amplifier on and off. A detented front panel rotary potentiometer for each channel used to control the output level. Back Panel Controls: A three-position switch which selects Stereo, Bridge-Mono, or Parallel-Mono mode. A ground lift switch used to isolate the phone jack input grounds from the chassis (AC) ground. Internal Controls: A three-position switch located inside the P.I.P compartment selects 0.775V, 1.4V, or 26 dB voltage gain input sensitivity. Mounting: Standard EIA 310 front-panel rack mount with supports for supplemental rear corner mounting. If you have any questions or require any further information please call 0121-333-7711 or via email to For more information on this and other new and used products available from Cloud One please feel free to visit our website. POSTAGE AND SHIPPING £25.00 International shipping possible worldwide, please contact us for a quote. RETURNS POLICY Should you be unhappy with your purchase or have any issues with your item then please contact us within 14 days of purchase.robbc@cloudone.net
0121-333-7711
0121-333-7711 International shipping possible worldwide, please contact us for a quote. A preloved/used Amcron Macro Tech 2401 amplifier in good condition that will be supplied after being checked, serviced and PAT tested. This unit is actually manufactured by Crown; Amcron was their imprint for shipping to the UK. The only difference is the badge. Macro-Tech amplifiers are designed to provide enormous levels of pure, undistorted power in a rugged low-profile package— making them the choice for pro sound reinforcement. They utilize our patented ODEP® protection circuitry to keep the show going long after other amplifiers have shut down. Manufacturer’s specifications:- Frequency Response: ±0.1dB from 20 Hz to 20 kHz at 1 Watt. Phase Response: ±10° from 10 Hz to 20 kHz at 1 Watt. Signal to Noise Ratio: A-weighted, better than 105 dB below full rated output. Better than 100 dB below full rated output from 20 Hz to 20 kHz. Total Harmonic Distortion (THD): <0.05% from 20 Hz to 1 kHz, increasing linearly to 0.1% at 20 kHz at 500W. I.M. Distortion: <0.05% from less than 164 milliwatts to 520 W at 26 dB gain. Slew Rate: >13V per microsecond. (Slew rates are limited to useful levels for ultrasonic/RF protection.) Damping Factor: >1000 from 10 Hz to 400 Hz. DC Offset: <10 millivolts. Input Impedance: Nominally 20K ohms balanced; 10K ohms unbalanced. Output Impedance: <10 milliohms in series with <2 microhenries. Input Connectors: Balanced 1/4 inch phone jacks. Balanced female XLR connector for each channel on the standard P.I.P.-FX module. Output Connectors: Color-coded 5-way binding posts on 3/4 inch centers; spaced 3/4 inch apart. Front Panel Controls: A front panel push button switch used to power the amplifier on and off. A detented front panel rotary potentiometer for each channel used to control the output level. Back Panel Controls: A three-position switch which selects Stereo, Bridge-Mono, or Parallel-Mono mode. A ground lift switch used to isolate the phone jack input grounds from the chassis (AC) ground. Internal Controls: A three-position switch located inside the P.I.P compartment selects 0.775V, 1.4V, or 26 dB voltage gain input sensitivity. Mounting: Standard EIA 310 front-panel rack mount with supports for supplemental rear corner mounting. If you have any questions or require any further information please call 0121-333-7711 or via email to For more information on this and other new and used products available from Cloud One please feel free to visit our website. POSTAGE AND SHIPPING £25.00 International shipping possible worldwide, please contact us for a quote. RETURNS POLICY Should you be unhappy with your purchase or have any issues with your item then please contact us within 14 days of purchase.robbc@cloudone.net
0121-333-7711