Back to the main page Back to category Signal Processors or Rack Effect
musical instrument details
BRICASTI DESIGN - SYSTEM 4
Estimated price for orientation: 15 500 $
Category: Signal Processors or Rack Effect
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Bricasti Design MPN: SYSTEM 4 EAN: Does not apply
Référence : SYSTEM 4 Disponibilité: Disponible sur commande
Livraison: Nous contacter pour vérifier la disponibilité et de délai
Garantie: 3 ans pièces & main-d'oeuvre BRICASTI DESIGN - SYSTEM 4 - Pack comprenant quatre processeurs M7M + télécommande M10, son câble de liaison de 10m et trois câbles interconnexion de 25cm M7 - Processeur de reverberation numerique stereo : Le processeur Mainframe Bricasti M7M Reverb est une réplique exacte du M7 Stereo Reverb Processor avec face avant sans commandes ni affichage, elle et est destiné à être utilisé avec la console distante M10. Réverb haut de gamme et de haute-qualité des anciens collaborateurs de Lexicon Casey Dowdell et Brian Zollner. De la tuerie! A entendre absolument! Le M7 redéfinit les standards dans le domaine des processeurs de réverbe, car la plus haute musicalité et la maniabilité la plus aisée sont unies dans cet appareil. En plus le design moderne et de bonne facture s'appuie sur une plateforme contenant 6 processeurs DSP dernier cri. Le M7 à une longueur d'avance en matière de perfectionnement de ses d'algorithmes de reverb. La section analogique élaborée avec soin ainsi qu'une alimentation dédiée fournit des meilleures spécifications que toutes les machines du même type. Caractéristiques : 100 préréglages de réverb Traitement des réverbs en stéréo Préréglages classiques et nouveaux : Hall, Plates, Booms, Chambers, Amblent spaces 12 programmes paramétrables 100 registres utilisateurs 4 "favoris" en façade pour sauvegarde rapide et comparatifs Alimentations doubles, dédiées Transformateur toroïdal spécifique pour la section analogique Alimentation à découplage pour la section numérique Modules analogiques et numériques séparés Châssis en acier inox, anti-corrosion Façade et boutons en aluminium anodisé Contrôle du niveau d'entrée analogique par pas de 2dB Assemblé manuellement aux USA Caractéristiques techniques et performances de la section numérique (préliminaires)
: Entrées/sorties numériques AES 24-bit
Support du mode AES 192k, simple câble
Ajustement automatique de l'horloge pour les fréquences d'échantillonnage entre 44.1k et 192k 6 processeurs DSP Analog Devices dual core Section Analogique : Jitter inférieur à 20 picosecondes
Niveau d'entrée ajustable par pas de 2dB
Entrées/sorties analogiques symétriques sur connecteurs XLR Conversion sur 24-bit Double convertisseur D/A
Entièrement symétrique, circuits analogiques entrée et sortie couplés DC
Entrée analogique A/D : Dynamique >116dB, classe A Distorsion harmonique inférieure à 0.001% Bande passante : 10Hz 20kHz,±0.05dB CMRR :supérieur à 60 dB à 1 kHz
Niveau d'entrée maxi :+24dB Niveau d'entrée mini pour 0dBFS :+4dBu
Sortie analogique D/A : Dynamique >116dB, classe A
Distorsion harmonique inférieure à 0.001% Bande passante :10Hz 20kHz,±0.05dB
Niveau de sortie maxi :+24dB Niveau de sortie mini pour 0dBFS :+4dBu Impédance de sortie :40 Ohms M10 - Télécommande pour processeur de reverberation stereo M7 : Le M10 est une interface de contrôle pour le processeur de réverbération stéréo M7. Conçu sur les mêmes critères que le M7, le boîtier M10 est fabriqué et usiné à partir d'aluminium anodisé pour une longue durée de vie. Il peut être très utile lorsque vous utilisez plus d'un M7 ou quand il est nécessaire d'effectuer des réglages plus précis dans un environnement de mixage plus large. Caractéristiques : Pour processeur de réverbération numérique stéréo M7. Boîtier usiné à partir d'aluminium anodisé solide Contrôle jusqu'à 8x modules Bricasti M7 Connexion facile via RS422 Pas besoin d'alimentation dédiée Reference : SYSTEM 4 Availability: Available on request
Processing time: Contact us to check the product availability and delivery times
Guaranty: 3 years by manufacturer BRICASTI DESIGN - SYSTEM 4 - Four Bricasti M7M reverb processors, M10 Remote and three M7-SC cables The Bricasti M7M Reverb Processor Mainframe is an exact duplicate of the M7 Stereo Reverb Processor with reduced front panel controls, and is intended to be used in conjunction with the M10 Remote Console. The Bricasti Design M7 provides the highest level of musicality and ease of control imaginable in a processor dedicated to the task of reverberation. A modern high resolution digital design, utilizing a stunning array of the latest DSP processors, provides a platform for the long overdue next step in reverb processing algorithms. A separate fully differential analog section and dedicated transformer based linear power supply provide the finest analog specifications of any product of its kind. An exceptionally strong stainless steel chassis, and a tooled aluminum front panel, combine with a classic high visibility display and straight forward human interface, to complete an enduring design that is intended to fulfill its role, now and into the future. Each design element of the Model 7 is a carefully considered statement of our vision of what the evolution of reverberation processing in its most classic form can be. With a deep appreciation of the best designs which precede it, and a passion for moving the science of reverberation forward, the Model 7 provides a palette of sounds that encompass the familiar as well as new expressions in the art. Listen to the new reference in reverb processing; it will bring new life to your art, in a way unimagined by any process before it. Features : 100 unique reverb presets Revolutionary new reverb algorithm True Stereo Reverb Process Classic and new Presets; Halls, Plates, Rooms, Chambers, Ambient Spaces 12 Parametric Program Parameters 100 User registers 4 front panel “Favorites” for quick saves and compares Hardware Design Features : Dual dedicated power supplies Custom design toroidal transfomer linear supply for analog High performace switching supply for digital Separate digital and analog modules Non corrosive stainless steel chassis and top cover Milled anodzied aluminum front panel, knobs and button caps Postive feel 2 db stepped analog input level control MIDI I/O Hand Crafted in the USA The new Bricasti Design Model 10 remote console is a dedicated hardware remote controller for use with the M7 stereo reverb processor. Following the same design criteria as the M7, the M10 casing is manufactured and milled from solid anodized aluminum, for an enduring design and long life. The M10 is also designed to be simple to use, and easy to interface; utilizing a standard RS422 serial interface. In application, it can be very useful when using more than one M7 or when there is a need to be more in the sweet spot when making adjustments in a large mixing environment. Features : Custom milled solid aluminum casing and buttons, fine finished and anodized for an enduring design and classic look Controls from 1-8 x M7s Connects to the first M7 via RS422 9pin serial cable, 10 meter cable provided, up to 30meters that is 480L compatible, simple to install with no practical distance limits, or IP addresses to configure. Longer distances may require an additional power source for the M10. Simple serial ‘loop thru” for connecting more M7s, connect to the first and loop to the second, and third etc DC Power is supplied from the M7 through the cable, no wall warts, or external supplies 8 meters, for 4 stereo pairs, metering 4 machines at a time Machine selection is a by dedicated Machine key in the M10: Press the machine key to “toggle or step though” for 2 x M7 operation Press machine key and use the Jog wheel to step through the machineso for control of more the 2 x M7s. Press machine key and use the 1-4 keys to directly access any machine, for control of more the 2 x M7s Use the “up down keys” to change banks and for metering for control of more the 4 x M7s.o Same clear easy to read displays as used in the M7 Same user interface as the M7, with the addition of Machine and Setup keys, so no need to learn something new Simultaneous control of the M7 from both the M7s front panel and or the M10 with a lock out Setup key for the M10’s local memory, configurations, and settings Referencia : SYSTEM 4 Availability: Available on request
Processing time: Contact us to check the product availability and delivery times
Guaranty: 3 years by manufacturer BRICASTI DESIGN - SYSTEM 4 - Four Bricasti M7M reverb processors, M10 Remote and three M7-SC cables The Bricasti M7M Reverb Processor Mainframe is an exact duplicate of the M7 Stereo Reverb Processor with reduced front panel controls, and is intended to be used in conjunction with the M10 Remote Console. The Bricasti Design M7 provides the highest level of musicality and ease of control imaginable in a processor dedicated to the task of reverberation. A modern high resolution digital design, utilizing a stunning array of the latest DSP processors, provides a platform for the long overdue next step in reverb processing algorithms. A separate fully differential analog section and dedicated transformer based linear power supply provide the finest analog specifications of any product of its kind. An exceptionally strong stainless steel chassis, and a tooled aluminum front panel, combine with a classic high visibility display and straight forward human interface, to complete an enduring design that is intended to fulfill its role, now and into the future. Each design element of the Model 7 is a carefully considered statement of our vision of what the evolution of reverberation processing in its most classic form can be. With a deep appreciation of the best designs which precede it, and a passion for moving the science of reverberation forward, the Model 7 provides a palette of sounds that encompass the familiar as well as new expressions in the art. Listen to the new reference in reverb processing; it will bring new life to your art, in a way unimagined by any process before it. Features : 100 unique reverb presets Revolutionary new reverb algorithm True Stereo Reverb Process Classic and new Presets; Halls, Plates, Rooms, Chambers, Ambient Spaces 12 Parametric Program Parameters 100 User registers 4 front panel “Favorites” for quick saves and compares Hardware Design Features : Dual dedicated power supplies Custom design toroidal transfomer linear supply for analog High performace switching supply for digital Separate digital and analog modules Non corrosive stainless steel chassis and top cover Milled anodzied aluminum front panel, knobs and button caps Postive feel 2 db stepped analog input level control MIDI I/O Hand Crafted in the USA The new Bricasti Design Model 10 remote console is a dedicated hardware remote controller for use with the M7 stereo reverb processor. Following the same design criteria as the M7, the M10 casing is manufactured and milled from solid anodized aluminum, for an enduring design and long life. The M10 is also designed to be simple to use, and easy to interface; utilizing a standard RS422 serial interface. In application, it can be very useful when using more than one M7 or when there is a need to be more in the sweet spot when making adjustments in a large mixing environment. Features : Custom milled solid aluminum casing and buttons, fine finished and anodized for an enduring design and classic look Controls from 1-8 x M7s Connects to the first M7 via RS422 9pin serial cable, 10 meter cable provided, up to 30meters that is 480L compatible, simple to install with no practical distance limits, or IP addresses to configure. Longer distances may require an additional power source for the M10. Simple serial ‘loop thru” for connecting more M7s, connect to the first and loop to the second, and third etc DC Power is supplied from the M7 through the cable, no wall warts, or external supplies 8 meters, for 4 stereo pairs, metering 4 machines at a time Machine selection is a by dedicated Machine key in the M10: Press the machine key to “toggle or step though” for 2 x M7 operation Press machine key and use the Jog wheel to step through the machineso for control of more the 2 x M7s. Press machine key and use the 1-4 keys to directly access any machine, for control of more the 2 x M7s Use the “up down keys” to change banks and for metering for control of more the 4 x M7s.o Same clear easy to read displays as used in the M7 Same user interface as the M7, with the addition of Machine and Setup keys, so no need to learn something new Simultaneous control of the M7 from both the M7s front panel and or the M10 with a lock out Setup key for the M10’s local memory, configurations, and settings Artikel-Nr : SYSTEM 4 Availability: Available on request
Processing time: Contact us to check the product availability and delivery times
Guaranty: 3 years by manufacturer BRICASTI DESIGN - SYSTEM 4 - Four Bricasti M7M reverb processors, M10 Remote and three M7-SC cables The Bricasti M7M Reverb Processor Mainframe is an exact duplicate of the M7 Stereo Reverb Processor with reduced front panel controls, and is intended to be used in conjunction with the M10 Remote Console. The Bricasti Design M7 provides the highest level of musicality and ease of control imaginable in a processor dedicated to the task of reverberation. A modern high resolution digital design, utilizing a stunning array of the latest DSP processors, provides a platform for the long overdue next step in reverb processing algorithms. A separate fully differential analog section and dedicated transformer based linear power supply provide the finest analog specifications of any product of its kind. An exceptionally strong stainless steel chassis, and a tooled aluminum front panel, combine with a classic high visibility display and straight forward human interface, to complete an enduring design that is intended to fulfill its role, now and into the future. Each design element of the Model 7 is a carefully considered statement of our vision of what the evolution of reverberation processing in its most classic form can be. With a deep appreciation of the best designs which precede it, and a passion for moving the science of reverberation forward, the Model 7 provides a palette of sounds that encompass the familiar as well as new expressions in the art. Listen to the new reference in reverb processing; it will bring new life to your art, in a way unimagined by any process before it. Features : 100 unique reverb presets Revolutionary new reverb algorithm True Stereo Reverb Process Classic and new Presets; Halls, Plates, Rooms, Chambers, Ambient Spaces 12 Parametric Program Parameters 100 User registers 4 front panel “Favorites” for quick saves and compares Hardware Design Features : Dual dedicated power supplies Custom design toroidal transfomer linear supply for analog High performace switching supply for digital Separate digital and analog modules Non corrosive stainless steel chassis and top cover Milled anodzied aluminum front panel, knobs and button caps Postive feel 2 db stepped analog input level control MIDI I/O Hand Crafted in the USA The new Bricasti Design Model 10 remote console is a dedicated hardware remote controller for use with the M7 stereo reverb processor. Following the same design criteria as the M7, the M10 casing is manufactured and milled from solid anodized aluminum, for an enduring design and long life. The M10 is also designed to be simple to use, and easy to interface; utilizing a standard RS422 serial interface. In application, it can be very useful when using more than one M7 or when there is a need to be more in the sweet spot when making adjustments in a large mixing environment. Features : Custom milled solid aluminum casing and buttons, fine finished and anodized for an enduring design and classic look Controls from 1-8 x M7s Connects to the first M7 via RS422 9pin serial cable, 10 meter cable provided, up to 30meters that is 480L compatible, simple to install with no practical distance limits, or IP addresses to configure. Longer distances may require an additional power source for the M10. Simple serial ‘loop thru” for connecting more M7s, connect to the first and loop to the second, and third etc DC Power is supplied from the M7 through the cable, no wall warts, or external supplies 8 meters, for 4 stereo pairs, metering 4 machines at a time Machine selection is a by dedicated Machine key in the M10: Press the machine key to “toggle or step though” for 2 x M7 operation Press machine key and use the Jog wheel to step through the machineso for control of more the 2 x M7s. Press machine key and use the 1-4 keys to directly access any machine, for control of more the 2 x M7s Use the “up down keys” to change banks and for metering for control of more the 4 x M7s.o Same clear easy to read displays as used in the M7 Same user interface as the M7, with the addition of Machine and Setup keys, so no need to learn something new Simultaneous control of the M7 from both the M7s front panel and or the M10 with a lock out Setup key for the M10’s local memory, configurations, and settings Riferimento : SYSTEM 4 Availability: Available on request
Processing time: Contact us to check the product availability and delivery times
Guaranty: 3 years by manufacturer BRICASTI DESIGN - SYSTEM 4 - Four Bricasti M7M reverb processors, M10 Remote and three M7-SC cables The Bricasti M7M Reverb Processor Mainframe is an exact duplicate of the M7 Stereo Reverb Processor with reduced front panel controls, and is intended to be used in conjunction with the M10 Remote Console. The Bricasti Design M7 provides the highest level of musicality and ease of control imaginable in a processor dedicated to the task of reverberation. A modern high resolution digital design, utilizing a stunning array of the latest DSP processors, provides a platform for the long overdue next step in reverb processing algorithms. A separate fully differential analog section and dedicated transformer based linear power supply provide the finest analog specifications of any product of its kind. An exceptionally strong stainless steel chassis, and a tooled aluminum front panel, combine with a classic high visibility display and straight forward human interface, to complete an enduring design that is intended to fulfill its role, now and into the future. Each design element of the Model 7 is a carefully considered statement of our vision of what the evolution of reverberation processing in its most classic form can be. With a deep appreciation of the best designs which precede it, and a passion for moving the science of reverberation forward, the Model 7 provides a palette of sounds that encompass the familiar as well as new expressions in the art. Listen to the new reference in reverb processing; it will bring new life to your art, in a way unimagined by any process before it. Features : 100 unique reverb presets Revolutionary new reverb algorithm True Stereo Reverb Process Classic and new Presets; Halls, Plates, Rooms, Chambers, Ambient Spaces 12 Parametric Program Parameters 100 User registers 4 front panel “Favorites” for quick saves and compares Hardware Design Features : Dual dedicated power supplies Custom design toroidal transfomer linear supply for analog High performace switching supply for digital Separate digital and analog modules Non corrosive stainless steel chassis and top cover Milled anodzied aluminum front panel, knobs and button caps Postive feel 2 db stepped analog input level control MIDI I/O Hand Crafted in the USA The new Bricasti Design Model 10 remote console is a dedicated hardware remote controller for use with the M7 stereo reverb processor. Following the same design criteria as the M7, the M10 casing is manufactured and milled from solid anodized aluminum, for an enduring design and long life. The M10 is also designed to be simple to use, and easy to interface; utilizing a standard RS422 serial interface. In application, it can be very useful when using more than one M7 or when there is a need to be more in the sweet spot when making adjustments in a large mixing environment. Features : Custom milled solid aluminum casing and buttons, fine finished and anodized for an enduring design and classic look Controls from 1-8 x M7s Connects to the first M7 via RS422 9pin serial cable, 10 meter cable provided, up to 30meters that is 480L compatible, simple to install with no practical distance limits, or IP addresses to configure. Longer distances may require an additional power source for the M10. Simple serial ‘loop thru” for connecting more M7s, connect to the first and loop to the second, and third etc DC Power is supplied from the M7 through the cable, no wall warts, or external supplies 8 meters, for 4 stereo pairs, metering 4 machines at a time Machine selection is a by dedicated Machine key in the M10: Press the machine key to “toggle or step though” for 2 x M7 operation Press machine key and use the Jog wheel to step through the machineso for control of more the 2 x M7s. Press machine key and use the 1-4 keys to directly access any machine, for control of more the 2 x M7s Use the “up down keys” to change banks and for metering for control of more the 4 x M7s.o Same clear easy to read displays as used in the M7 Same user interface as the M7, with the addition of Machine and Setup keys, so no need to learn something new Simultaneous control of the M7 from both the M7s front panel and or the M10 with a lock out Setup key for the M10’s local memory, configurations, and settings Global Audio Store, Revendeur Bricasti Design agréé
Global Audio Store, Authorized Bricasti Design Dealer
Global Audio Store, Authorized Bricasti Design Dealer
Global Audio Store, Authorized Bricasti Design Dealer
Global Audio Store, Authorized Bricasti Design Dealer
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Bricasti Design |
| MPN: | SYSTEM 4 | EAN: | Does not apply |
Référence : SYSTEM 4
Disponibilité: Disponible sur commande
Livraison: Nous contacter pour vérifier la disponibilité et de délai
Garantie: 3 ans pièces & main-d'oeuvre
Livraison: Nous contacter pour vérifier la disponibilité et de délai
Garantie: 3 ans pièces & main-d'oeuvre
BRICASTI DESIGN - SYSTEM 4 - Pack comprenant quatre processeurs M7M + télécommande M10, son câble de liaison de 10m et trois câbles interconnexion de 25cm M7 - Processeur de reverberation numerique stereo : Le processeur Mainframe Bricasti M7M Reverb est une réplique exacte du M7 Stereo Reverb Processor avec face avant sans commandes ni affichage, elle et est destiné à être utilisé avec la console distante M10. Réverb haut de gamme et de haute-qualité des anciens collaborateurs de Lexicon Casey Dowdell et Brian Zollner. De la tuerie! A entendre absolument! Le M7 redéfinit les standards dans le domaine des processeurs de réverbe, car la plus haute musicalité et la maniabilité la plus aisée sont unies dans cet appareil. En plus le design moderne et de bonne facture s'appuie sur une plateforme contenant 6 processeurs DSP dernier cri. Le M7 à une longueur d'avance en matière de perfectionnement de ses d'algorithmes de reverb. La section analogique élaborée avec soin ainsi qu'une alimentation dédiée fournit des meilleures spécifications que toutes les machines du même type. Caractéristiques : 100 préréglages de réverb Traitement des réverbs en stéréo Préréglages classiques et nouveaux : Hall, Plates, Booms, Chambers, Amblent spaces 12 programmes paramétrables 100 registres utilisateurs 4 "favoris" en façade pour sauvegarde rapide et comparatifs Alimentations doubles, dédiées Transformateur toroïdal spécifique pour la section analogique Alimentation à découplage pour la section numérique Modules analogiques et numériques séparés Châssis en acier inox, anti-corrosion Façade et boutons en aluminium anodisé Contrôle du niveau d'entrée analogique par pas de 2dB Assemblé manuellement aux USA Caractéristiques techniques et performances de la section numérique (préliminaires)
: Entrées/sorties numériques AES 24-bit
Support du mode AES 192k, simple câble
Ajustement automatique de l'horloge pour les fréquences d'échantillonnage entre 44.1k et 192k 6 processeurs DSP Analog Devices dual core Section Analogique : Jitter inférieur à 20 picosecondes
Niveau d'entrée ajustable par pas de 2dB
Entrées/sorties analogiques symétriques sur connecteurs XLR Conversion sur 24-bit Double convertisseur D/A
Entièrement symétrique, circuits analogiques entrée et sortie couplés DC
Entrée analogique A/D : Dynamique >116dB, classe A Distorsion harmonique inférieure à 0.001% Bande passante : 10Hz 20kHz,±0.05dB CMRR :supérieur à 60 dB à 1 kHz
Niveau d'entrée maxi :+24dB Niveau d'entrée mini pour 0dBFS :+4dBu
Sortie analogique D/A : Dynamique >116dB, classe A
Distorsion harmonique inférieure à 0.001% Bande passante :10Hz 20kHz,±0.05dB
Niveau de sortie maxi :+24dB Niveau de sortie mini pour 0dBFS :+4dBu Impédance de sortie :40 Ohms
M10 - Télécommande pour processeur de reverberation stereo M7 : Le M10 est une interface de contrôle pour le processeur de réverbération stéréo M7. Conçu sur les mêmes critères que le M7, le boîtier M10 est fabriqué et usiné à partir d'aluminium anodisé pour une longue durée de vie. Il peut être très utile lorsque vous utilisez plus d'un M7 ou quand il est nécessaire d'effectuer des réglages plus précis dans un environnement de mixage plus large. Caractéristiques : Pour processeur de réverbération numérique stéréo M7. Boîtier usiné à partir d'aluminium anodisé solide Contrôle jusqu'à 8x modules Bricasti M7 Connexion facile via RS422 Pas besoin d'alimentation dédiée
Reference : SYSTEM 4
Availability: Available on request
Processing time: Contact us to check the product availability and delivery times
Guaranty: 3 years by manufacturer
Processing time: Contact us to check the product availability and delivery times
Guaranty: 3 years by manufacturer
BRICASTI DESIGN - SYSTEM 4 - Four Bricasti M7M reverb processors, M10 Remote and three M7-SC cables The Bricasti M7M Reverb Processor Mainframe is an exact duplicate of the M7 Stereo Reverb Processor with reduced front panel controls, and is intended to be used in conjunction with the M10 Remote Console. The Bricasti Design M7 provides the highest level of musicality and ease of control imaginable in a processor dedicated to the task of reverberation. A modern high resolution digital design, utilizing a stunning array of the latest DSP processors, provides a platform for the long overdue next step in reverb processing algorithms. A separate fully differential analog section and dedicated transformer based linear power supply provide the finest analog specifications of any product of its kind. An exceptionally strong stainless steel chassis, and a tooled aluminum front panel, combine with a classic high visibility display and straight forward human interface, to complete an enduring design that is intended to fulfill its role, now and into the future. Each design element of the Model 7 is a carefully considered statement of our vision of what the evolution of reverberation processing in its most classic form can be. With a deep appreciation of the best designs which precede it, and a passion for moving the science of reverberation forward, the Model 7 provides a palette of sounds that encompass the familiar as well as new expressions in the art. Listen to the new reference in reverb processing; it will bring new life to your art, in a way unimagined by any process before it. Features : 100 unique reverb presets Revolutionary new reverb algorithm True Stereo Reverb Process Classic and new Presets; Halls, Plates, Rooms, Chambers, Ambient Spaces 12 Parametric Program Parameters 100 User registers 4 front panel “Favorites” for quick saves and compares Hardware Design Features : Dual dedicated power supplies Custom design toroidal transfomer linear supply for analog High performace switching supply for digital Separate digital and analog modules Non corrosive stainless steel chassis and top cover Milled anodzied aluminum front panel, knobs and button caps Postive feel 2 db stepped analog input level control MIDI I/O Hand Crafted in the USA The new Bricasti Design Model 10 remote console is a dedicated hardware remote controller for use with the M7 stereo reverb processor. Following the same design criteria as the M7, the M10 casing is manufactured and milled from solid anodized aluminum, for an enduring design and long life. The M10 is also designed to be simple to use, and easy to interface; utilizing a standard RS422 serial interface. In application, it can be very useful when using more than one M7 or when there is a need to be more in the sweet spot when making adjustments in a large mixing environment. Features : Custom milled solid aluminum casing and buttons, fine finished and anodized for an enduring design and classic look Controls from 1-8 x M7s Connects to the first M7 via RS422 9pin serial cable, 10 meter cable provided, up to 30meters that is 480L compatible, simple to install with no practical distance limits, or IP addresses to configure. Longer distances may require an additional power source for the M10. Simple serial ‘loop thru” for connecting more M7s, connect to the first and loop to the second, and third etc DC Power is supplied from the M7 through the cable, no wall warts, or external supplies 8 meters, for 4 stereo pairs, metering 4 machines at a time Machine selection is a by dedicated Machine key in the M10: Press the machine key to “toggle or step though” for 2 x M7 operation Press machine key and use the Jog wheel to step through the machineso for control of more the 2 x M7s. Press machine key and use the 1-4 keys to directly access any machine, for control of more the 2 x M7s Use the “up down keys” to change banks and for metering for control of more the 4 x M7s.o Same clear easy to read displays as used in the M7 Same user interface as the M7, with the addition of Machine and Setup keys, so no need to learn something new Simultaneous control of the M7 from both the M7s front panel and or the M10 with a lock out Setup key for the M10’s local memory, configurations, and settings
Referencia : SYSTEM 4
Availability: Available on request
Processing time: Contact us to check the product availability and delivery times
Guaranty: 3 years by manufacturer
Processing time: Contact us to check the product availability and delivery times
Guaranty: 3 years by manufacturer
BRICASTI DESIGN - SYSTEM 4 - Four Bricasti M7M reverb processors, M10 Remote and three M7-SC cables The Bricasti M7M Reverb Processor Mainframe is an exact duplicate of the M7 Stereo Reverb Processor with reduced front panel controls, and is intended to be used in conjunction with the M10 Remote Console. The Bricasti Design M7 provides the highest level of musicality and ease of control imaginable in a processor dedicated to the task of reverberation. A modern high resolution digital design, utilizing a stunning array of the latest DSP processors, provides a platform for the long overdue next step in reverb processing algorithms. A separate fully differential analog section and dedicated transformer based linear power supply provide the finest analog specifications of any product of its kind. An exceptionally strong stainless steel chassis, and a tooled aluminum front panel, combine with a classic high visibility display and straight forward human interface, to complete an enduring design that is intended to fulfill its role, now and into the future. Each design element of the Model 7 is a carefully considered statement of our vision of what the evolution of reverberation processing in its most classic form can be. With a deep appreciation of the best designs which precede it, and a passion for moving the science of reverberation forward, the Model 7 provides a palette of sounds that encompass the familiar as well as new expressions in the art. Listen to the new reference in reverb processing; it will bring new life to your art, in a way unimagined by any process before it. Features : 100 unique reverb presets Revolutionary new reverb algorithm True Stereo Reverb Process Classic and new Presets; Halls, Plates, Rooms, Chambers, Ambient Spaces 12 Parametric Program Parameters 100 User registers 4 front panel “Favorites” for quick saves and compares Hardware Design Features : Dual dedicated power supplies Custom design toroidal transfomer linear supply for analog High performace switching supply for digital Separate digital and analog modules Non corrosive stainless steel chassis and top cover Milled anodzied aluminum front panel, knobs and button caps Postive feel 2 db stepped analog input level control MIDI I/O Hand Crafted in the USA The new Bricasti Design Model 10 remote console is a dedicated hardware remote controller for use with the M7 stereo reverb processor. Following the same design criteria as the M7, the M10 casing is manufactured and milled from solid anodized aluminum, for an enduring design and long life. The M10 is also designed to be simple to use, and easy to interface; utilizing a standard RS422 serial interface. In application, it can be very useful when using more than one M7 or when there is a need to be more in the sweet spot when making adjustments in a large mixing environment. Features : Custom milled solid aluminum casing and buttons, fine finished and anodized for an enduring design and classic look Controls from 1-8 x M7s Connects to the first M7 via RS422 9pin serial cable, 10 meter cable provided, up to 30meters that is 480L compatible, simple to install with no practical distance limits, or IP addresses to configure. Longer distances may require an additional power source for the M10. Simple serial ‘loop thru” for connecting more M7s, connect to the first and loop to the second, and third etc DC Power is supplied from the M7 through the cable, no wall warts, or external supplies 8 meters, for 4 stereo pairs, metering 4 machines at a time Machine selection is a by dedicated Machine key in the M10: Press the machine key to “toggle or step though” for 2 x M7 operation Press machine key and use the Jog wheel to step through the machineso for control of more the 2 x M7s. Press machine key and use the 1-4 keys to directly access any machine, for control of more the 2 x M7s Use the “up down keys” to change banks and for metering for control of more the 4 x M7s.o Same clear easy to read displays as used in the M7 Same user interface as the M7, with the addition of Machine and Setup keys, so no need to learn something new Simultaneous control of the M7 from both the M7s front panel and or the M10 with a lock out Setup key for the M10’s local memory, configurations, and settings
Artikel-Nr : SYSTEM 4
Availability: Available on request
Processing time: Contact us to check the product availability and delivery times
Guaranty: 3 years by manufacturer
Processing time: Contact us to check the product availability and delivery times
Guaranty: 3 years by manufacturer
BRICASTI DESIGN - SYSTEM 4 - Four Bricasti M7M reverb processors, M10 Remote and three M7-SC cables The Bricasti M7M Reverb Processor Mainframe is an exact duplicate of the M7 Stereo Reverb Processor with reduced front panel controls, and is intended to be used in conjunction with the M10 Remote Console. The Bricasti Design M7 provides the highest level of musicality and ease of control imaginable in a processor dedicated to the task of reverberation. A modern high resolution digital design, utilizing a stunning array of the latest DSP processors, provides a platform for the long overdue next step in reverb processing algorithms. A separate fully differential analog section and dedicated transformer based linear power supply provide the finest analog specifications of any product of its kind. An exceptionally strong stainless steel chassis, and a tooled aluminum front panel, combine with a classic high visibility display and straight forward human interface, to complete an enduring design that is intended to fulfill its role, now and into the future. Each design element of the Model 7 is a carefully considered statement of our vision of what the evolution of reverberation processing in its most classic form can be. With a deep appreciation of the best designs which precede it, and a passion for moving the science of reverberation forward, the Model 7 provides a palette of sounds that encompass the familiar as well as new expressions in the art. Listen to the new reference in reverb processing; it will bring new life to your art, in a way unimagined by any process before it. Features : 100 unique reverb presets Revolutionary new reverb algorithm True Stereo Reverb Process Classic and new Presets; Halls, Plates, Rooms, Chambers, Ambient Spaces 12 Parametric Program Parameters 100 User registers 4 front panel “Favorites” for quick saves and compares Hardware Design Features : Dual dedicated power supplies Custom design toroidal transfomer linear supply for analog High performace switching supply for digital Separate digital and analog modules Non corrosive stainless steel chassis and top cover Milled anodzied aluminum front panel, knobs and button caps Postive feel 2 db stepped analog input level control MIDI I/O Hand Crafted in the USA The new Bricasti Design Model 10 remote console is a dedicated hardware remote controller for use with the M7 stereo reverb processor. Following the same design criteria as the M7, the M10 casing is manufactured and milled from solid anodized aluminum, for an enduring design and long life. The M10 is also designed to be simple to use, and easy to interface; utilizing a standard RS422 serial interface. In application, it can be very useful when using more than one M7 or when there is a need to be more in the sweet spot when making adjustments in a large mixing environment. Features : Custom milled solid aluminum casing and buttons, fine finished and anodized for an enduring design and classic look Controls from 1-8 x M7s Connects to the first M7 via RS422 9pin serial cable, 10 meter cable provided, up to 30meters that is 480L compatible, simple to install with no practical distance limits, or IP addresses to configure. Longer distances may require an additional power source for the M10. Simple serial ‘loop thru” for connecting more M7s, connect to the first and loop to the second, and third etc DC Power is supplied from the M7 through the cable, no wall warts, or external supplies 8 meters, for 4 stereo pairs, metering 4 machines at a time Machine selection is a by dedicated Machine key in the M10: Press the machine key to “toggle or step though” for 2 x M7 operation Press machine key and use the Jog wheel to step through the machineso for control of more the 2 x M7s. Press machine key and use the 1-4 keys to directly access any machine, for control of more the 2 x M7s Use the “up down keys” to change banks and for metering for control of more the 4 x M7s.o Same clear easy to read displays as used in the M7 Same user interface as the M7, with the addition of Machine and Setup keys, so no need to learn something new Simultaneous control of the M7 from both the M7s front panel and or the M10 with a lock out Setup key for the M10’s local memory, configurations, and settings
Riferimento : SYSTEM 4
Availability: Available on request
Processing time: Contact us to check the product availability and delivery times
Guaranty: 3 years by manufacturer
Processing time: Contact us to check the product availability and delivery times
Guaranty: 3 years by manufacturer
BRICASTI DESIGN - SYSTEM 4 - Four Bricasti M7M reverb processors, M10 Remote and three M7-SC cables The Bricasti M7M Reverb Processor Mainframe is an exact duplicate of the M7 Stereo Reverb Processor with reduced front panel controls, and is intended to be used in conjunction with the M10 Remote Console. The Bricasti Design M7 provides the highest level of musicality and ease of control imaginable in a processor dedicated to the task of reverberation. A modern high resolution digital design, utilizing a stunning array of the latest DSP processors, provides a platform for the long overdue next step in reverb processing algorithms. A separate fully differential analog section and dedicated transformer based linear power supply provide the finest analog specifications of any product of its kind. An exceptionally strong stainless steel chassis, and a tooled aluminum front panel, combine with a classic high visibility display and straight forward human interface, to complete an enduring design that is intended to fulfill its role, now and into the future. Each design element of the Model 7 is a carefully considered statement of our vision of what the evolution of reverberation processing in its most classic form can be. With a deep appreciation of the best designs which precede it, and a passion for moving the science of reverberation forward, the Model 7 provides a palette of sounds that encompass the familiar as well as new expressions in the art. Listen to the new reference in reverb processing; it will bring new life to your art, in a way unimagined by any process before it. Features : 100 unique reverb presets Revolutionary new reverb algorithm True Stereo Reverb Process Classic and new Presets; Halls, Plates, Rooms, Chambers, Ambient Spaces 12 Parametric Program Parameters 100 User registers 4 front panel “Favorites” for quick saves and compares Hardware Design Features : Dual dedicated power supplies Custom design toroidal transfomer linear supply for analog High performace switching supply for digital Separate digital and analog modules Non corrosive stainless steel chassis and top cover Milled anodzied aluminum front panel, knobs and button caps Postive feel 2 db stepped analog input level control MIDI I/O Hand Crafted in the USA The new Bricasti Design Model 10 remote console is a dedicated hardware remote controller for use with the M7 stereo reverb processor. Following the same design criteria as the M7, the M10 casing is manufactured and milled from solid anodized aluminum, for an enduring design and long life. The M10 is also designed to be simple to use, and easy to interface; utilizing a standard RS422 serial interface. In application, it can be very useful when using more than one M7 or when there is a need to be more in the sweet spot when making adjustments in a large mixing environment. Features : Custom milled solid aluminum casing and buttons, fine finished and anodized for an enduring design and classic look Controls from 1-8 x M7s Connects to the first M7 via RS422 9pin serial cable, 10 meter cable provided, up to 30meters that is 480L compatible, simple to install with no practical distance limits, or IP addresses to configure. Longer distances may require an additional power source for the M10. Simple serial ‘loop thru” for connecting more M7s, connect to the first and loop to the second, and third etc DC Power is supplied from the M7 through the cable, no wall warts, or external supplies 8 meters, for 4 stereo pairs, metering 4 machines at a time Machine selection is a by dedicated Machine key in the M10: Press the machine key to “toggle or step though” for 2 x M7 operation Press machine key and use the Jog wheel to step through the machineso for control of more the 2 x M7s. Press machine key and use the 1-4 keys to directly access any machine, for control of more the 2 x M7s Use the “up down keys” to change banks and for metering for control of more the 4 x M7s.o Same clear easy to read displays as used in the M7 Same user interface as the M7, with the addition of Machine and Setup keys, so no need to learn something new Simultaneous control of the M7 from both the M7s front panel and or the M10 with a lock out Setup key for the M10’s local memory, configurations, and settings
Global Audio Store, Revendeur Bricasti Design agréé
Global Audio Store, Authorized Bricasti Design Dealer
Global Audio Store, Authorized Bricasti Design Dealer
Global Audio Store, Authorized Bricasti Design Dealer
Global Audio Store, Authorized Bricasti Design Dealer