Back to the main page Back to category Distortion and Overdrive
musical instrument details
Matrix GT1000FX Power Amp - Guitar Amplifier
Estimated price for orientation: 440 $
Category: Distortion and Overdrive
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition
This Matrix GT1000 Power amp is in Excellent condition near new, only been used indoors at home. This is a great power amp that i used with my Axe FX but have also used it with Mesa Traxis and Studio preamps with great results.
One the best solid state power amps out today.. The GT1000FX is a lightweight 1U format stereo rack mount power amplifier designed specifically for use by guitarists that builds on the Matrix heritage. The GT1000FX is designed with a full range of guitar products in mind, from modellers to valve pre-amps, pre-amp pedals, "slaving" traditional amplifiers and the newer mini-amps with line outputs. Whilst still delivering the same flat response as the GT800FX, the GT1000FX has been modified to respond even more like a valve power amplifier, giving a "looser" feel and a more open sound that we genuinely believe to be the closest a solid state amp has come to valves! We've not just improved the sound either but also managed to cram another 200 Watts under the hood whilst still keeping the weight at an unbelievable 2.6kg. That's 1000 watts in bridged mode at 8ohms and a big 150W at 16 ohms! Dual speed fans ensure that the amplifier stays cool with even all that power, under the most demanding conditions. Neutrik combi 1/4 inch/XLR inputs and combi 1/4inch/Speakon outputs give you maximum flexibilty in how you connect the GT1000FX. We've also added a dedicated output for bridged mode, so no special cables are necessary to deliver the full mono power of the amplifier into any impedance of 8 ohms or over. The GT1000FX still has the same ability to handle all impedances 4 ohms and over including mis-matched loads giving you the widest choice when using your favourite cabs and speakers. Running a 2x12 cab with an 8 ohm and 16 ohm speaker in mono or running a 4 ohm cab on one side and a 16 ohm cab on the other in stereo mode is no problem for the GT1000FX! The amplifier features extensive protection circuitry ensuring it is protected from loudspeaker short circuits and miswiring as well as indicators for protection, bridged-mode and signal lights showing the output signal strength. The Matrix GT1000FX takes the Matrix line of products to a whole new level, way beyond 11. TECHNICAL SPECIFICATIONS Number of channels 2
Watts per channel @ 4 ohm500w RMS
Watts per channel @ 8 ohm325w RMS
Watts per channel @ 16 ohm150w RMS
Bridged mode @ 8 ohm1000w RMS
Bridged mode @ 16 ohm650w RMS
Input sensitivity0.775V - 0dB
Frequency Response (+/-3db ref 1kHz)8hz-24kHz
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition |
This Matrix GT1000 Power amp is in Excellent condition near new, only been used indoors at home. This is a great power amp that i used with my Axe FX but have also used it with Mesa Traxis and Studio preamps with great results.
One the best solid state power amps out today.. The GT1000FX is a lightweight 1U format stereo rack mount power amplifier designed specifically for use by guitarists that builds on the Matrix heritage. The GT1000FX is designed with a full range of guitar products in mind, from modellers to valve pre-amps, pre-amp pedals, "slaving" traditional amplifiers and the newer mini-amps with line outputs. Whilst still delivering the same flat response as the GT800FX, the GT1000FX has been modified to respond even more like a valve power amplifier, giving a "looser" feel and a more open sound that we genuinely believe to be the closest a solid state amp has come to valves! We've not just improved the sound either but also managed to cram another 200 Watts under the hood whilst still keeping the weight at an unbelievable 2.6kg. That's 1000 watts in bridged mode at 8ohms and a big 150W at 16 ohms! Dual speed fans ensure that the amplifier stays cool with even all that power, under the most demanding conditions. Neutrik combi 1/4 inch/XLR inputs and combi 1/4inch/Speakon outputs give you maximum flexibilty in how you connect the GT1000FX. We've also added a dedicated output for bridged mode, so no special cables are necessary to deliver the full mono power of the amplifier into any impedance of 8 ohms or over. The GT1000FX still has the same ability to handle all impedances 4 ohms and over including mis-matched loads giving you the widest choice when using your favourite cabs and speakers. Running a 2x12 cab with an 8 ohm and 16 ohm speaker in mono or running a 4 ohm cab on one side and a 16 ohm cab on the other in stereo mode is no problem for the GT1000FX! The amplifier features extensive protection circuitry ensuring it is protected from loudspeaker short circuits and miswiring as well as indicators for protection, bridged-mode and signal lights showing the output signal strength. The Matrix GT1000FX takes the Matrix line of products to a whole new level, way beyond 11. TECHNICAL SPECIFICATIONS Number of channels 2
Watts per channel @ 4 ohm500w RMS
Watts per channel @ 8 ohm325w RMS
Watts per channel @ 16 ohm150w RMS
Bridged mode @ 8 ohm1000w RMS
Bridged mode @ 16 ohm650w RMS
Input sensitivity0.775V - 0dB
Frequency Response (+/-3db ref 1kHz)8hz-24kHz
One the best solid state power amps out today.. The GT1000FX is a lightweight 1U format stereo rack mount power amplifier designed specifically for use by guitarists that builds on the Matrix heritage. The GT1000FX is designed with a full range of guitar products in mind, from modellers to valve pre-amps, pre-amp pedals, "slaving" traditional amplifiers and the newer mini-amps with line outputs. Whilst still delivering the same flat response as the GT800FX, the GT1000FX has been modified to respond even more like a valve power amplifier, giving a "looser" feel and a more open sound that we genuinely believe to be the closest a solid state amp has come to valves! We've not just improved the sound either but also managed to cram another 200 Watts under the hood whilst still keeping the weight at an unbelievable 2.6kg. That's 1000 watts in bridged mode at 8ohms and a big 150W at 16 ohms! Dual speed fans ensure that the amplifier stays cool with even all that power, under the most demanding conditions. Neutrik combi 1/4 inch/XLR inputs and combi 1/4inch/Speakon outputs give you maximum flexibilty in how you connect the GT1000FX. We've also added a dedicated output for bridged mode, so no special cables are necessary to deliver the full mono power of the amplifier into any impedance of 8 ohms or over. The GT1000FX still has the same ability to handle all impedances 4 ohms and over including mis-matched loads giving you the widest choice when using your favourite cabs and speakers. Running a 2x12 cab with an 8 ohm and 16 ohm speaker in mono or running a 4 ohm cab on one side and a 16 ohm cab on the other in stereo mode is no problem for the GT1000FX! The amplifier features extensive protection circuitry ensuring it is protected from loudspeaker short circuits and miswiring as well as indicators for protection, bridged-mode and signal lights showing the output signal strength. The Matrix GT1000FX takes the Matrix line of products to a whole new level, way beyond 11. TECHNICAL SPECIFICATIONS Number of channels 2
Watts per channel @ 4 ohm500w RMS
Watts per channel @ 8 ohm325w RMS
Watts per channel @ 16 ohm150w RMS
Bridged mode @ 8 ohm1000w RMS
Bridged mode @ 16 ohm650w RMS
Input sensitivity0.775V - 0dB
Frequency Response (+/-3db ref 1kHz)8hz-24kHz