Back to the main page Back to category Preamps and Channel Strips
musical instrument details
D.A.V. Electronics Broadhurst Gardens No. 1U — Dual Channel Mic Pre Amp
Estimated price for orientation: 459 $
Category: Preamps and Channel Strips
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: DAV Electronics MPN: Does Not Apply Type: Microphone Preamp Number of Channels: 2 Model: BG1U Country/Region of Manufacture: United Kingdom EAN: Does not apply
The DAV Electronics BG1u Dual Channel Mic-Pre/DI has 2 classic DAV pre-amps as used in the original Decca studios designs, the same design as in the successful BG1 1 D.I input, 2 balanced outputs, 2 unbalanced outputs, Phase/Pad/HPF/48v on each channel. Massive gain, low noise and distortion, the pre-amp retains the integrity of the source like nothing else. Hand made in the U.K. DAV Electronics BG1u Main Features: Frequency response: 10Hz - 150KHz ± 0.25dB Decca Heritage Mic gain range: 22dB - 66dB in 4dB steps. [pad in -4dB - 40dB] Distortion: Less than 0.01% Typ, 0.001% 1KHz @ +20dBu o/p High pass filter: 68Hz @ 12dB per octave (Switchable both channels)
Noise: 25 microvolts [-110dB ref+20 dBu. Bandwidth: 10Hz-18KHz input loaded 150 ohms, 32dB gain Phase reversal: Both channels (Switchable)
48v phantom: Both channels (Switchable) Level indication: Red LED +18dB - Green LED +8dB - Green LED 0dB
26dB pads: Both channels (Switchable) Clipping level: +29 dBu D.I. input: Channel 1 High impedance [1.8 Meg Ohms] Input: XLR x 2, Jack x 1 (DI Input) Output: XLR x 2 (bal), Jack x 2 (unbal) D.I. gain range: Channel 1 only -8 > 36dB in 4dB steps Dimensions: 19" 1U rack mount. Depth = 150mm Power Connectors: IEC mains
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | DAV Electronics |
| MPN: | Does Not Apply | Type: | Microphone Preamp |
| Number of Channels: | 2 | Model: | BG1U |
| Country/Region of Manufacture: | United Kingdom | EAN: | Does not apply |
The DAV Electronics BG1u Dual Channel Mic-Pre/DI has 2 classic DAV pre-amps as used in the original Decca studios designs, the same design as in the successful BG1 1 D.I input, 2 balanced outputs, 2 unbalanced outputs, Phase/Pad/HPF/48v on each channel. Massive gain, low noise and distortion, the pre-amp retains the integrity of the source like nothing else. Hand made in the U.K. DAV Electronics BG1u Main Features: Frequency response: 10Hz - 150KHz ± 0.25dB Decca Heritage Mic gain range: 22dB - 66dB in 4dB steps. [pad in -4dB - 40dB] Distortion: Less than 0.01% Typ, 0.001% 1KHz @ +20dBu o/p High pass filter: 68Hz @ 12dB per octave (Switchable both channels)
Noise: 25 microvolts [-110dB ref+20 dBu. Bandwidth: 10Hz-18KHz input loaded 150 ohms, 32dB gain Phase reversal: Both channels (Switchable)
48v phantom: Both channels (Switchable) Level indication: Red LED +18dB - Green LED +8dB - Green LED 0dB
26dB pads: Both channels (Switchable) Clipping level: +29 dBu D.I. input: Channel 1 High impedance [1.8 Meg Ohms] Input: XLR x 2, Jack x 1 (DI Input) Output: XLR x 2 (bal), Jack x 2 (unbal) D.I. gain range: Channel 1 only -8 > 36dB in 4dB steps Dimensions: 19" 1U rack mount. Depth = 150mm Power Connectors: IEC mains
Noise: 25 microvolts [-110dB ref+20 dBu. Bandwidth: 10Hz-18KHz input loaded 150 ohms, 32dB gain Phase reversal: Both channels (Switchable)
48v phantom: Both channels (Switchable) Level indication: Red LED +18dB - Green LED +8dB - Green LED 0dB
26dB pads: Both channels (Switchable) Clipping level: +29 dBu D.I. input: Channel 1 High impedance [1.8 Meg Ohms] Input: XLR x 2, Jack x 1 (DI Input) Output: XLR x 2 (bal), Jack x 2 (unbal) D.I. gain range: Channel 1 only -8 > 36dB in 4dB steps Dimensions: 19" 1U rack mount. Depth = 150mm Power Connectors: IEC mains