Package Includes: (1) Focusrite Clarett OctoPre 8-Channel 24-bit /192kHz Studio Recording Mic Pre-Amp (1) Rockville RCM02 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount (1) Rockville RMF2 Studio Microphone Isolation Shield with Sound Dampening Foam

---

Authorized Focusrite Dealer!
Plug-in Collective Offer Ends 2/28/17 Description of Clarett OctoPre: 8 In. 8 Out. Over ADAT.
Whatever you record, however you work, there will come the day that you need more inputs. Clarett OctoPre gives you eight - and eight outputs too - that you can use to extend the capabilities of your Clarett Thunderbolt audio interface - or any other interface fitted with ADAT optical inputs and outputs.

Eight Clarett Mic Pres with extra ‘Air’
The mic pres have been designed specifically for the Clarett range, with plenty of gain, yet low noise and distortion - and great sound quality. They include a special “Air” feature that switches in an analogue model of the classic transformer-based Focusrite ISA mic pre, switching the impedance of the preamp to that of the original ISA, and enabling a ‘transformer resonance effect’, giving your microphone recordings the air and clarity of an ISA transformer-based mic pre recording. In addition, the mic pres have plenty of headroom and are ideal for recording drums and other extreme level sources. Mic, line and instrument inputs
The front panel includes dual instrument inputs featuring extra headroom to handle the loudest pickup, while the rear panel includes universal XLR/jack connectors for the remaining auto-switching mic/line inputs. In addition, each input has its own switched insert point for single-cable connection of compression, equalisation and other outboard analogue processing - with hard-wired relay bypass so you can leave outboard gear or a patchbay connected ready to access at the press of a button.In addition to providing eight mic pres with 24-bit, 192kHz A-D conversion, the Clarett OctoPre offers D-A conversion of up to eight ADAT digital channels feeding 25-pin DSUB rear-panel analogue outputs, making it useful for mixing as well as tracking. The line outputs can optionally provide line level output feeds from the mic pres - useful for feeding a live console, for example, while recording the digital outputs. Aside from the insert point, the Clarett OctoPre is balanced end to end for exceptional noise immunity.
Precision Digital Conversion
There's no point in having the superb-quality mic preamps in the Clarett OctoPre without equally superb digital conversion to back them up. Focusrite has been making digital audio converters almost as long as mic preamps, and those in the Clarett OctoPre ensure that you maintain the highest possible quality getting your music in and out of your DAW. The Clarett OctoPre's precision 24-bit converters operate at standard sample rates all the way up to 192kHz - ideal for hi-res audio - with up to 118dB (A-D) /119dB (D-A) dynamic range. Clarett OctoPre also includes both internal and external clocking with Word Clock I/O and JetPLL(TM) jitter elimination.Features: Focusrite Clarett OctoPre 8-Channel 24-bit /192kHz Studio Recording Mic Pre-Amp Supported Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Microphone Inputs:
Frequency Response: 20 Hz - 35 kHz ±0.1 dB
Dynamic Range (Without Insert): 118 dB (A-weighted)
Dynamic Range (With Insert): 115 dB (A-Weighted)
THD+N: 0.001%
Noise EIN: –128 dBu (A-Weighted)
Maximum input level: +18 dBu ±0.5 dB
Gain Range: 57dB
Line Inputs:
Frequency Response: 20 Hz - 35 kHz ±0.1 dB
Dynamic Range (Without Insert): 117 dB (A-weighted)
Dynamic Range (With Insert): 115 dB (A-Weighted)
THD+N: 0.001%
Maximum input level: +26 dBU ±0.5 dB Gain Range: 57dB
Instrument Inputs:
Frequency Response: 20 Hz – 35 kHz ± 0.1 dB
Dynamic Range (Without Insert): 116 dB (A-weighted)
Dynamic Range (With Insert): 114 dB (A-Weighted)
THD+N: 0.001%
Maximum input level: +14dBu ±0.5 dB
Gain Range: 57dB
Line Outputs:
Dynamic Range (Line Outputs): 118 dB (A-Weighted)
Maximum Output Level (0 dBFS): +16 dBu, balanced
THD+N: 0.0007%

---

  Authorized Rockville Dealer The Rockville RCM02 condenser microphone performs better than famous branded microphones that cost over $125. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We highly recommend this design. We also upgraded this model to a high end metal anti wind cap! This model is an amazing upgrade to our top selling RCM01 model! Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM02 amazing in studio applications.The aluminum construction makes the RCM02 tough enough for Live sound applications as well!

Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ – 20KHZ!  The mic sounds crystal clear sound with no distortion! The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.
What's Included:
RCM02 Condenser Microphone (made of aluminum!)
10 foot 3.5mm jack to XLR 100% Copper cable to connect mic to your computer or iPad, etc
10 foot 100% Copper XLR to XLR cable to connect to any mixer with phantom power
Metal shock mount
Metal Anti-wind foam cap
Owners Manual
Warranty card
Features:
Rockville RCM02 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
Aluminum high quality construction Polar Pattern: Internally Polarized Condenser Cardioid Design Large diaphragm for smooth, natural sound and low noise Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer) Uni-directional Sensitivity: -29dB±2dB(0dB=1V/Pa at1kHZ) Output impedance: 200Ω±30%(at 1kHz) Standard operating voltage: 3V Operating voltage range: 1.5V-10V Current consumption: less than 500ūA Voltage deduction characteristic: within 3dB at 2V S/N ratio: More than 24dB Frequency Response: 30Hz - 20 KHz Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz Load impedance: Greater or = to 1000 Ohms Equivalent Noise level: Less than 18dB A (IEC581-5) Max. Input SPL: 126dB(THD≤1.0% at 1kHZ) Electrical current: Greater than 4.8Ma Microphone body net weight：380 Grams (0.84 Pounds) Microphone Max.diameter 51mm (2” inches) Microphone Length 215mm (8.46” inches) Microphone material: steel grille + Aluminum (handheld part) PCB Layout: Surface mount

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.

---

RMF2 Includes: 5 Panel Mic Isolation Shield
Hardware to Mount unit to your mic stand
5/8” Mic Adapter
Desktop mic attachment
RMF2
Rockville’s RMF2 studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 2-inch-thick high density acoustic foam, the RMF2 keeps unwanted outside audio waves and vibrations from affecting your recordings. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, meanwhile room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a countertop/tabletop. Easy installation and studio quality performance will quickly make the RMF2 your go-to sound dampening isolation shield.
Features: RMF2 Pro Audio Acoustic Microphone Isolation Shield
Keeps Excessive Room Ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
Isolates Directional Microphones from Off Axis Coloration
Limits External Bleed from Unintended Sound Sources Features a 2-Inch-Thick High Density Pyramid Acoustic Foam front and a vented metal back plate for the Best Noise Reflection Reduction
Can be used in fixed location
Stand mountable
Provides Vocal Booth Style Recordings with Minimal Footprint Professional Studio-Grade
Rugged Finish Makes This Easy to Transport
Tri-Pod Foot Design for Stability on Flat Surfaces
3/8 Die-Cast Metal Threads
Mic Stand with 5/8 Adapter
The shield is made of pure high-grade steel
Number of Panels: 5 pcs
Dimensions Each Panel: 6.3'' x 12.6'' inch
Dimensions Assembled Unit: 17.5'' x 16.1'' x 7'' inch ​​ ​Shipping information: Inner box size: 17.5” x 16.15” x 7” Weight: 11.5Lbs