Back to the main page Back to category Vintage Pro Audio Equipment
musical instrument details
Audio Precision ATS-2 w/Performance Option -USB INTERFACE
Estimated price for orientation: 5 250 $
Category: Vintage Pro Audio Equipment
Class:
Description
Call Dr. Marshall Buck AT 310-836-4390. 9 AM 5 PM, PDTAudio Precision Dual Domain Audio Analyzer ATS-2 with High Performance Option
With APIB Interface USB ADAPTOR included
Exceptionally Clean Unit
Fully Performance Adjusted, and Warranted for 90 Days Two Channel Analog Generator and Two Channel Analyzer
Dual Channel Analog 40/150 Ohm Output Z 250 microvolts to 16 volts RMS
Analog Sine Sweep from 2Hz to 61.6 kHz w/Analog Stimulus Flatness Accurate to +/- 0.007 dB Burst Generation - Rectangular or Cosine Shaped, Square, Noise, Polarity, Arbitrary Waveform, Multitone, IMD Residual Generator Distortion Typ. -101 dB
Analyzers have -101 dB (0.0009%) Noise & Distortion Floor
Analyzer Bandwidth 120 kHz
Analyzer Input Voltage Range 355 mV to 200 Volts Peak Digital Interface Analyzer included with High Performance Option - Allows Jitter Analysis and much more. Digital sampling to 262.144 kHz High Performance Option is a $2800 Upgrade List Price of this unit is over $14K Internal Speaker to Monitor Signals
For full description and specs go to: http://ap.com/products/ats2
The World Standard for Audio System Measurements
Test Avionics, Audio Processors, Broadcast Links, PA Systems, Vacuum Tube Electronics, Amplifiers, Preamplifiers, Low Noise Amplifiers
Includes A-Wgt, AES 468(CCIR), Dolby 2k, 20 kHz Lowpass Filters Testing Capability Includes: Frequency Response, Crosstalk, Noise, Distortion (Harmonic), Common-Mode Rejection. 2 Channel Ratio, Intermod (SMPTE, DIN), FFT Spectral Analysis to 32k points Total Harmonic Distortion Measurements Input/Output Linearity Testing Program Automated Test Procedures for QC using Included AP Basic Software Regulation: Invoke Servo Feedback to Set Criterion Variable - E.G. Vary Drive Level for a Defined Level of Distortion Floating Balanced XLR I/O or Unbalanced BNC I/O with 200 kOhm Input Z
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
You need to provide a Windows XP to Win7/8/10 32/64BIT PC with USB to Control the AP Analyzer Questions? Call Dr. Marshall Buck 310-836-4390 9 AM to 5 PM PST
90 Day Warranty Includes USB Interface , Cable, Power Cord and APWin 1.60 Software
Proof of Performance Check
Description
Call Dr. Marshall Buck AT 310-836-4390. 9 AM 5 PM, PDTAudio Precision Dual Domain Audio Analyzer ATS-2 with High Performance Option
With APIB Interface
USB ADAPTOR included
Exceptionally Clean Unit
Fully Performance Adjusted, and Warranted for 90 Days Two Channel Analog Generator and Two Channel Analyzer
Dual Channel Analog 40/150 Ohm Output Z 250 microvolts to 16 volts RMS
Analog Sine Sweep from 2Hz to 61.6 kHz w/Analog Stimulus Flatness Accurate to +/- 0.007 dB Burst Generation - Rectangular or Cosine Shaped, Square, Noise, Polarity, Arbitrary Waveform, Multitone, IMD Residual Generator Distortion Typ. -101 dB
Analyzers have -101 dB (0.0009%) Noise & Distortion Floor
Analyzer Bandwidth 120 kHz
Analyzer Input Voltage Range 355 mV to 200 Volts Peak Digital Interface Analyzer included with High Performance Option - Allows Jitter Analysis and much more. Digital sampling to 262.144 kHz High Performance Option is a $2800 Upgrade List Price of this unit is over $14K Internal Speaker to Monitor Signals
For full description and specs go to: http://ap.com/products/ats2
The World Standard for Audio System Measurements
Test Avionics, Audio Processors, Broadcast Links, PA Systems, Vacuum Tube Electronics, Amplifiers, Preamplifiers, Low Noise Amplifiers
Includes A-Wgt, AES 468(CCIR), Dolby 2k, 20 kHz Lowpass Filters Testing Capability Includes: Frequency Response, Crosstalk, Noise, Distortion (Harmonic), Common-Mode Rejection. 2 Channel Ratio, Intermod (SMPTE, DIN), FFT Spectral Analysis to 32k points Total Harmonic Distortion Measurements Input/Output Linearity Testing Program Automated Test Procedures for QC using Included AP Basic Software Regulation: Invoke Servo Feedback to Set Criterion Variable - E.G. Vary Drive Level for a Defined Level of Distortion Floating Balanced XLR I/O or Unbalanced BNC I/O with 200 kOhm Input Z
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
You need to provide a Windows XP to Win7/8/10 32/64BIT PC with USB to Control the AP Analyzer Questions? Call Dr. Marshall Buck 310-836-4390 9 AM to 5 PM PST
90 Day Warranty Includes USB Interface , Cable, Power Cord and APWin 1.60 Software
Proof of Performance Check
Exceptionally Clean Unit
Fully Performance Adjusted, and Warranted for 90 Days Two Channel Analog Generator and Two Channel Analyzer
Dual Channel Analog 40/150 Ohm Output Z 250 microvolts to 16 volts RMS
Analog Sine Sweep from 2Hz to 61.6 kHz w/Analog Stimulus Flatness Accurate to +/- 0.007 dB Burst Generation - Rectangular or Cosine Shaped, Square, Noise, Polarity, Arbitrary Waveform, Multitone, IMD Residual Generator Distortion Typ. -101 dB
Analyzers have -101 dB (0.0009%) Noise & Distortion Floor
Analyzer Bandwidth 120 kHz
Analyzer Input Voltage Range 355 mV to 200 Volts Peak Digital Interface Analyzer included with High Performance Option - Allows Jitter Analysis and much more. Digital sampling to 262.144 kHz High Performance Option is a $2800 Upgrade List Price of this unit is over $14K Internal Speaker to Monitor Signals
For full description and specs go to: http://ap.com/products/ats2
The World Standard for Audio System Measurements
Test Avionics, Audio Processors, Broadcast Links, PA Systems, Vacuum Tube Electronics, Amplifiers, Preamplifiers, Low Noise Amplifiers
Includes A-Wgt, AES 468(CCIR), Dolby 2k, 20 kHz Lowpass Filters Testing Capability Includes: Frequency Response, Crosstalk, Noise, Distortion (Harmonic), Common-Mode Rejection. 2 Channel Ratio, Intermod (SMPTE, DIN), FFT Spectral Analysis to 32k points Total Harmonic Distortion Measurements Input/Output Linearity Testing Program Automated Test Procedures for QC using Included AP Basic Software Regulation: Invoke Servo Feedback to Set Criterion Variable - E.G. Vary Drive Level for a Defined Level of Distortion Floating Balanced XLR I/O or Unbalanced BNC I/O with 200 kOhm Input Z
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
You need to provide a Windows XP to Win7/8/10 32/64BIT PC with USB to Control the AP Analyzer Questions? Call Dr. Marshall Buck 310-836-4390 9 AM to 5 PM PST
90 Day Warranty Includes USB Interface , Cable, Power Cord and APWin 1.60 Software
Proof of Performance Check