2017 Serial Number: 170030933 BODY TOP Wood Species: Maple Pieces: 2 Grade: AAA Binding: Cream BACK Wood Species: Mahogany Pieces: 2 Density: Low Binding: None WEIGHT Weight Relief: Ultra-Modern Average Weight (body only): 4lbs. 6.7oz MATERIALS USED Glue: Franklin Titebond 50 Tonal, Resonant, and/or Technical Effect: n/a BODY CONTOUR Carve: Classic  NECK Wood Species: Mahogany Pieces: 1 DETAILS Truss Rod: Les Paul Profile: Slim taper Thickness at Fret 1: .800" Thickness at Fret 12: .875" Average Weight: 1 lbs 2.0 oz PEG HEAD Type: SP1-B Inlay: Mother of Pearl Peg Head Binding: None Logo: "Gibson" Silkscreen: Gold "Les Paul Model" Headstock Angle: 17 degrees NECK FIT Joint Angle: 5.0 degrees Joint Angle Tolerance: 0 deg 0 min 15 sec Type: Mortis and Tenon Adhesive: Franklin Titebond 50 Gauges Used: Pitch Height Gauge and Alignment Gauge NUT Style: Nut Material: Tektoid Width: 1.695" Slots: E: 0.046", A: 0.036", D: 0.026", G: 0.016", B: 0.011", e: 0.009" FINGERBOARD Wood Species: Rosewood Pieces: 1 Shade: Dark FINGERBOARD DETAILS Radius: Compound Radius Frets: 22 Nut/End of Board: 1.695" @ nut, 2.260" @ end of board Scale: 24.75" Binding: Cream Side Dots (Color): Black FINGERBOARD INLAYS Style: Trapezoid Material: Acrylic Dimensions: Large - 0.66" x 1.17" Small - 0.24" x 1.56" Average Weight: 4.16 oz FINISH Color Code: HB Surface Texture: Smooth/ Hi-Gloss 90 Sheen Lacquer Filler: Walnut Sealer: 1.5-2 mils Top: Honey Burst Top Coat: Hi-Gloss Lacquer / 90 Sheen, 7-8 mils Scraped: Fingerboard Sides, Body and Nut  ELECTRONICS PICKUPS (Rhythm, Lead) Style: Rhythm Pro, Lead Pro Winds/Coil: Screw side/Slug side: 5000 / 5200, 5300 / 5500 Material of Wire (gauge): Enamel (42), Enamel (42) Coil Dimensions (per coil):2.61" x 0.68", 2.61" x 0.68" Coil Material: ABS, ABS Coil Winding Process: Machine Wound, Machine Wound Pole Piece Material: Nickel plated steel, Nickel plated steel Pole Piece Position from Nut: 18.625", 23.437" Slug Material: Nickel plated steel, Nickel plated steel Slug Dimensions (diameter x length): 0.187 x 0.489", 0.187 x 0.489" Magnet Material: Alnico 5, Alnico 5 Magnet Position from Nut: 19", 23.125 " Magnet Dimensions: 2.375" x 0.5", 2.375" x 0.5" Cover: Chrome, Chrome Qfactor: 5.4, 5.35 ResistanceDC: 7640 Ohms, 7980 Ohms Resonant Frequency: 2863.30 Hz, 2780.20 Hz  CONTROL POCKET ASSEMBLY LEAD VOLUME, RHYTHM VOLUME Type: 500k Push/Pull "Coil-Tap", 500k Push/Pull "Coil-Tap" Peak Voltage: 500V, 500V Range: 0-500K, 0-500K Power Rating: 1/4 watt above 100K ohms, 1/4 watt above 100K ohms Resistance Tolerance: +/- 20%, +/- 20% Minimum Resistance: 200 ohms, 200 ohms LEAD TONE, RHYTHM TONE Type: 500k Push/Pull "Pure By-pass", 500k Push/Pull "Phase" Peak Voltage: 500V, 500V Range: 0-500K, 0-500K Power Rating: 1/4 watt above 100K ohms, 1/4 watt above 100K ohms Resistance Tolerance: +/- 20%, +/- 20% Minimum Resistance: 200 ohms, 200 ohms Capacitors: Lead Value = .022uF, Rhythm Value = .022uF HARDWARE TUNING KEYS Style: Grover Locking Kidney Material: Chrome Weight: 1.5 oz TUNING KEYS DETAILS Tuning Ratio: 18:01 Gear Type: Worm What is allowable turn: +/- 4 degrees Plating specs: Chrome Part numbers: 430-15851 / 52 STRING DIMENSIONS E: 0.046", A: 0.036", D: 0.026", G: 0.016", B: 0.011", e: 0.009" BRIDGE Style: Tune-o-matic Material: Aluminum Plating Specs: Chrome Part number: 430-14450 Weight: .96 oz DIMENSIONS of STRING SLOTS E: 0.058", A: 0.048", D: 0.038", G: 0.028", B: 0.019'', e: 0.014" TAILPIECE Style: Stop Bar Compensated: No Material: Aluminum Plating Specs: Chrome Part number: 430-14451 Weight: 1.12 oz OUTPUT JACK Style: 1/4" mono gold plated positive contact JACK PLATE Style: Les Paul Square Material: Chrome Part Number: 430-19467 Weight: 0.21 oz STRAP BUTTONS Material: Aluminum Plating Specs: None Part numbers: 430-19160 / 60E Weight: 0.14 oz. PLASTICS PICKGUARD Style: Les Paul Part Number: 430-12093 TRUSS ROD COVER Style: Black/White bell, Stamp "Standard" Part Number: 430-19398 KNOBS Style: Amber Top Hat Part Number: 430-19631 DIAL POINTERS Yes/No: No CONTROL PLATE(S) (BACKPLATE COVER) Style: SS infused polycarbonate for ESD protection Part Number: 380-12209 CONTROL PLATE(S) (SWITCHPLATE COVER) Style: SS infused polycarbonate for ESD protection Part Number: 380-12211 SWITCH WASHER Style: None Part Number: n/a TRIM RINGS Style: Cream Humbucker Low/High Part Number: 430-13894 / 430-13893 ACCESSORIES CASE Style: Hard Shell Color: Brown Strap Locks: None Tools: Gibson USA Multi-Tool, Gibson USA Premium Strap, Gibson USA Polishing Cloth Manual: Gibson USA's owners COA/Other: None