Back to the main page Back to category Live and Studio Mixers
musical instrument details
Yamaha MC1604II Mixing Console
Estimated price for orientation: 599 $
Category: Live and Studio Mixers
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Yamaha Type: Mixing Console
Yamaha MC1604II Mixing Console Up for auction is a used Yamaha MC1604II Mixing Console. The unit works fine, it was just too much for our small church where the audio is run by volunteers. It is missing one slider cap. But other than that it is in very good condition.
Note: This is a large item which must be shipped by either FedEx or UPS I will work with you to achieve the lowest possible shipping cost.Features-• A total of 10 buses.
• 4 group, 4 auxiliary and the main stereo. Insert point on all channel inputs Group outputs (1-4), and the main stereo outputs
• 4 auxiliary sends 2 pre, 2 post fader; user programmable.
• Input and output signals Can be monitored via the stereo cue bus.
• 2 fully assignable (line level) tape inputs This is for connecting tape-, CD-players, etc.
• Electronically-balanced It also has low impedance XLR type microphone inputs. • Balanced phone jack line inputs.
• Clear screen print legend and rotary control scaling This is for optimum S/N operation.
• Dedicated tape recorder outputs Pre-stereo master fader.
• 20dB attenuation pad switch• Input channel peak indicator Illuminates 3dB before clipping.
• +48 phantom powering The phantom powering is for the condenser type microphones.
• Low noise, high rejection integral power supply. Assignable VU meters The meters come with integral peak LED.
• Input Cue Led The Input Cue Led indicates when an input cue switch is active.
• L and R Cue Signal Leds They indicate the presence of a signal in an input channel.
• Four-band EQ Four-band parametric EQ consists of fixed frequency shelving high and low EQs, and two variable frequency peak type mid-band EQs. All EQ's provide up to 15dB of boost or cut, and the high EQ is centered at 10kHz and the low, at 100Hz. The low mid EQ's center frequency can be set from 80 Hz to 1.6 kHz and the high mid EQ, from 400 Hz to 8kHz. The choice of center frequencies and the overlap between frequency bands allows you to perform detailed equalization across the audio spectrum.
• Auxiliaries Four auxiliary sends are provided: auxiliaries 1 and 2 are configured pre-fader, pre-EQ, pre-HPF, and auxiliaries 3 and 4 are post fader.
• Monitor, route and mute Input channels can be routed to any pair of group buses (1 and 2, or 3 and 4) or to the stereo bus. Monitoring is possible using the channel CUE switch, which, when selected, feeds the channel signal onto the cue bus, then to the headphone output. The cue switch is unaffected by the channel on/off switch, allowing you to monitor a channel even when it is muted.
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Yamaha |
| Type: | Mixing Console |
Yamaha MC1604II Mixing Console Up for auction is a used Yamaha MC1604II Mixing Console. The unit works fine, it was just too much for our small church where the audio is run by volunteers. It is missing one slider cap. But other than that it is in very good condition.
Note: This is a large item which must be shipped by either FedEx or UPS I will work with you to achieve the lowest possible shipping cost.Features-• A total of 10 buses.
• 4 group, 4 auxiliary and the main stereo. Insert point on all channel inputs Group outputs (1-4), and the main stereo outputs
• 4 auxiliary sends 2 pre, 2 post fader; user programmable.
• Input and output signals Can be monitored via the stereo cue bus.
• 2 fully assignable (line level) tape inputs This is for connecting tape-, CD-players, etc.
• Electronically-balanced It also has low impedance XLR type microphone inputs. • Balanced phone jack line inputs.
• Clear screen print legend and rotary control scaling This is for optimum S/N operation.
• Dedicated tape recorder outputs Pre-stereo master fader.
• 20dB attenuation pad switch• Input channel peak indicator Illuminates 3dB before clipping.
• +48 phantom powering The phantom powering is for the condenser type microphones.
• Low noise, high rejection integral power supply. Assignable VU meters The meters come with integral peak LED.
• Input Cue Led The Input Cue Led indicates when an input cue switch is active.
• L and R Cue Signal Leds They indicate the presence of a signal in an input channel.
• Four-band EQ Four-band parametric EQ consists of fixed frequency shelving high and low EQs, and two variable frequency peak type mid-band EQs. All EQ's provide up to 15dB of boost or cut, and the high EQ is centered at 10kHz and the low, at 100Hz. The low mid EQ's center frequency can be set from 80 Hz to 1.6 kHz and the high mid EQ, from 400 Hz to 8kHz. The choice of center frequencies and the overlap between frequency bands allows you to perform detailed equalization across the audio spectrum.
• Auxiliaries Four auxiliary sends are provided: auxiliaries 1 and 2 are configured pre-fader, pre-EQ, pre-HPF, and auxiliaries 3 and 4 are post fader.
• Monitor, route and mute Input channels can be routed to any pair of group buses (1 and 2, or 3 and 4) or to the stereo bus. Monitoring is possible using the channel CUE switch, which, when selected, feeds the channel signal onto the cue bus, then to the headphone output. The cue switch is unaffected by the channel on/off switch, allowing you to monitor a channel even when it is muted.